Jump to content

Recommended Posts

Posted

I am glad I can come to this community and ask questions but so pissed off the damn dealership could not tell me. I spoke to them and they said "We will find out for you". They never called me back, and yes I rang them up a second time.

 

Anyways, my 2014 GMC Sierra All-Terrain - 5.3L took E85 Flex Fuel. Any car or truck with a yellow gas cap will take it.

My new 2019 GMC Sierra AT4 - 6.2L has no cap and I can't find written anywhere if I can use the E85 Flex Fuel in it or not.

 

Anyone know?

 

Posted

As I understand it neither the 5.3 or 6.2 can run e85. The reason being is ethanol absorbs water if it is in the station storage tank for extended periods especially this time of year. Once it absorbs the water it turns into a white sludge  and can clog things up. I am not a scientist this is what I was told.

Posted

The current DFM 5.3l and 6.2l are NOT E85 compatible at this time


Sent from my iPhone using Tapatalk Pro

Posted

The 2019's for the 5.3 and 6.2 are not FF.  Makes me mad that they didn't offer it.  I still run a 50/50 mix of E85 and Premium in mine.  Same goes for my 2002 Silverado.  It isn't flex fuel but I do the same, 50/50 mix.  Love the way they run with it since it boost the octane up nicely.  Not to mention I like the exhaust smell. :)

Posted

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

  • Like 1
Posted
48 minutes ago, jumpinjoe said:

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

We've decided that the old two stroke in my dad's boat doesn't like ethanol so we put premium in it and it runs much better. 

Posted
The 2019's for the 5.3 and 6.2 are not FF.  Makes me mad that they didn't offer it.  I still run a 50/50 mix of E85 and Premium in mine.  Same goes for my 2002 Silverado.  It isn't flex fuel but I do the same, 50/50 mix.  Love the way they run with it since it boost the octane up nicely.  Not to mention I like the exhaust smell. [emoji4]


You actually use 50/50 Super/Flex and zero issues? I just started doing it with 5 gallons of E85 per tank of super


Sent from Above
Posted

Appreciate all the replies, glad I asked instead of just adding it in LOL..... Shitty they did not set the newer trucks up to run on it. My 2014 Sierra loved the E85 juice I gave her.... :)

Posted
5 hours ago, jumpinjoe said:

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

I ran full tanks of only E85 in my 2014 and she loved it. I did 5 tanks on Premium and 5 tanks on E85 and compared notes.

E85 cost less, higher octane, truck ran better BUT it did not get as many KM's out of a tank as the Premium did. In the long run Premium was cheaper to run. But I still ran E85 every 3 or 4 tanks. No mix, just straight.

Posted

Isn't the FF an available option? Somewhere I got the idea it was.

 

Regards,

jumpinjoe

Posted
6 hours ago, Cpl_Punishment said:

We've decided that the old two stroke in my dad's boat doesn't like ethanol so we put premium in it and it runs much better. 

Just gotta know what kind of 2 stroke motor is he running? We don't see any 2 strokes down here where we run. Thanks.

 

Regards,

jumpinjoe

Posted
6 hours ago, TXGREEK said:

 


You actually use 50/50 Super/Flex and zero issues? I just started doing it with 5 gallons of E85 per tank of super


Sent from Above

Yes,  a 50/50 mix no issues.  Been running it that way for over 3 years now. 

  • Like 1
Posted
4 hours ago, jumpinjoe said:

Just gotta know what kind of 2 stroke motor is he running? We don't see any 2 strokes down here where we run. Thanks.

 

Regards,

jumpinjoe

Sorry, that's on his ski boat, not an air boat. I can't remember for sure what he used to run on his remote control boats and air boats but I can ask him. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
    • when it's greyed out that is it's way of telling you that it's downloading the patch in the background. Eventually it will be fully downloaded and then it will prompt you at ignition shut down to run the update. I highly recommend doing the update once you get home and can run it a few times. I've had several issues with updates not going the first time around and I had to retry the update multiple times in my driveway before it was successful.   Some updates are huge and take awhile to download. You can help it by connecting to your home WiFi and keep the truck on service mode for the ignition and keep it alive for awhile on a battery charger too. There are specs it needs to be in for updating such as a full enough battery charge, no running ignition, etc.
    • I am not techy at all but wondered if you have the truck running but sitting still in park as some functions gray out as soon as the truck is moving. I believe in the settings for updates you can choose for it NOT to update and I wonder by chance if maybe that was chosen before and now it won't allow you to chose to press update, I think that is back in the settings menu where it has all the items one wants on or off etc. Also I assume you have a wifi connection and checked that it has some signal strength, not that it would have anything to do with the grayed out updates choice in that case. What I am thinking out loud of here may be be of no value but thought I would suggest it, sometimes it can be the simplest thing that resolves an issue.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...