Jump to content

Recommended Posts

Posted

Has anyone found a bed rack/overland rack that they really like? The pickings I'm finding in my online searches seem to be slim for the T1's. Anyone have something they really like?

 

While we're at it, has anyone found an overland tent set up that they enjoy?

Posted

Many of the tracks are weak or waaaaay over priced.  You might be best served by fabricating your own or seeing if a fabrication shop will build you one.  Price will most likely come out close to what you can purchase but would be significantly stronger than what you might find on the web.  I believe softopper has a soft top and tent combination that might fit your needs.

Posted (edited)

Putco makes a super expensive bed rack..like $1300 or something. Seems crazy from my Toyota days but c'est la vie. Subbed in hope someone knows of cheaper, mid-rise racks for RTT use.

Edited by cseaman
Posted

These are the new fad with huge bump in tacomas lately. Have you looked at lead time for 4runner/tacoma parts? Good luck getting anything with 4 months, and i'm sure its worse now.

 

My point is, all the "best" manufacturers are small shops, demand is through the roof the last few years causing huge price hikes and long leads and they're focused on the small truck market.

 

I'm going to sub in case someone finds something good.

Posted

Thanks, everyone. Appreciate the interest.

 

I'm wondering if it's better to go for the small, locally built rack in this case. Sounds like there may not be anything of note on the market just yet. Like @cseaman said above, Putco makes one - https://www.putco.com/venture-tec-rack-184000 - but that seems to be the only "brand" option I can find online. And you have to buy mounting plates separately. ?

Posted

So I've installed a Diamondback tonneau on the back of my truck and I'm working to install Front Runner rails with load bars on the Diamondback to support a RTT.  This should provide flexibility, as the load bars can be used for other purposes, or simply removed.  Just search for Diamondback and RTT and you should see some Tacoma examples.

 

The only downside with the Front Runner setup is the load bars (the ones that run side-to-side of the bed) max out at 56" wide.  Ideally, I think I want the load bars to be 62+" wide.  I believe they have racks that are wider and will fit our trucks.

 

As far as other options. take a look at Nuthouse Industries or KB VooDoo.

Posted
1 hour ago, AT4CK! said:

So I've installed a Diamondback tonneau on the back of my truck and I'm working to install Front Runner rails with load bars on the Diamondback to support a RTT.  This should provide flexibility, as the load bars can be used for other purposes, or simply removed.  Just search for Diamondback and RTT and you should see some Tacoma examples.

 

The only downside with the Front Runner setup is the load bars (the ones that run side-to-side of the bed) max out at 56" wide.  Ideally, I think I want the load bars to be 62+" wide.  I believe they have racks that are wider and will fit our trucks.

 

As far as other options. take a look at Nuthouse Industries or KB VooDoo.

Awesome, thanks for the info here!

  • 3 weeks later...
Posted

bump in case anyone knows of a good alternative to some of the newer yakima stuff at about $700

Posted

I was looking for this one for my 19 high country. Still waiting on a follow up from the manufacturer to see if they will make it for the silverado.

5137a5c39db2a0fa3f46a0dc8ead1fb7.jpg


Sent from my iPad using Tapatalk

  • Like 1
Posted

I still like Yakima. Only way to “nicely” get a rack on top of my tonneau cover. Retrax with the rack.
dfa5281437a15768c578bbd9cee31524.jpg
a012cb109fa1cd88edc54a50a4dd3496.jpg

Now, stage two coming this summer, is a roof top tent on a second set of feet between the two tall towers. I will be able to have the kayaks on the rack plus a roof top tent under. Pretty excited about the camping opportunities with this set up, and still with locking storage in the bed

Yes it’s expensive, but fabbing one out of aluminum would be a pain in the ass.

  • Like 2
Posted (edited)

Been looking at this one for a while now.  My planned setup would be this rack with a revolver x4 tonneau mounted underneath that I can still open.  Looking to be able to mount a fishing rod tube over the cab with it as needed, but want to be able to pull the whole setup off when I don't need it.  Possibly a roof-top tent in the future, though I'm no "overlander"...

 

They make a bunch of other accessories for the F150(and Taco's, of course?), but unfortunately haven't ventured into GM territory much yet. 

 

Best part, I think the price is quite reasonable @$750

 

https://rcimetalworks.com/product/18-adjustable-bed-rack/

 

 

Edited by MidWestAT4
Adding price
Posted
3 hours ago, MidWestAT4 said:

Been looking at this one for a while now.  My planned setup would be this rack with a revolver x4 tonneau mounted underneath that I can still open.  Looking to be able to mount a fishing rod tube over the cab with it as needed, but want to be able to pull the whole setup off when I don't need it.  Possibly a roof-top tent in the future, though I'm no "overlander"...

 

They make a bunch of other accessories for the F150(and Taco's, of course?), but unfortunately haven't ventured into GM territory much yet. 

 

Best part, I think the price is quite reasonable @$750

 

https://rcimetalworks.com/product/18-adjustable-bed-rack/

 

 

Great find! $750 is much more reasonable than I have been able to find thus far. Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,725
    Total Members
    8,960
    Most Online
    Griffin Donovan
    Newest Member
    Griffin Donovan
    Joined
  • Who's Online   4 Members, 0 Anonymous, 808 Guests (See full list)


  • Latest Articles

  • Posts

    • Hasn't come up in the 3 gm forums I follow. And only gm knows the frequency of failure of that part. LMG, you want a recall so it's replaced for free...
    • You need a better code reader/scanner.  You are missing codes.  Did the dealer give you a copy of the SAVI scan from that visit?     If the fluid hasn't been changed, change it.  Shudder will likely go away.  
    • TLDR to my other post...   Hard. Pass.  Too many what ifs.     Are you set on a 3.0 Duramax?  Have you considered anything not GM just in case?  If you don't have to have a pickup, lots of other options for $27,000 out there.   
    • I see some red flags.   - No mention in the Carfax if the oil pump belt was changed.  LM2s had a 150,000mi service interval, and its got 164,245mi on it.  So right out the gate it needs about $3000-3500 for that to be done before driving it another 150,000mi.  Belt is at the rear of the engine.     - If something happens to the transmission valve body, the special coverage is expired by mileage.  That will likely be an out of pocket expense, with zero or near zero GM participation if something happened even though its in by time.   - 2020 LM2s seem to need timing chains after 80,000mi at some point.  They fixed this end of 2020/starting 2021 model year engines.  They will usually set a P0016 I think?  There is another $8000-10,000 if it needs a chain.  The main chain is at the back, secondary at the front so the pump belt would be done at the same time if it needed chains.     - Long oil change intervals.  7,000-8,000mi on average, probably close to 0% or perhaps to or beyond 0% on the OLM.  Lots of them not at the dealer which makes me wonder how much of the oil ran through that truck was the proper Dexos D rated 0w20 oil and not just gas engine 0w20, which is not the same at all.     - Long fuel filter changes, again likely taking the fuel filter life to 0% or more.  First one went 28,603, second was done 43,094 miles later at 71,697, from there another 46,452mi to 118,149mi, and then the most recent one 37,026mi later at 155,175mi.  So counting its original fuel filter, its had only 4 fuel filters on it.  No bueno IMO.         Good news?    - It has had only two warranty trips to the dealer.  The first free service (end of December 2020 on the Carfax), and the transmission reprogram recall (end of August 2025 on the Carfax).     - Truck did a LOT of moving, so that might explain the lack of emissions related repairs like bad NOX sensors, bad exhaust temp sensors, bad glow plugs, etc.         The "emissions system checked" could just be how something was flagged for Carfax.  GM dealers have to do SAVI reports for warranty repair orders so they scan the truck.  So its possible that is there for that?  
    • Thank you, @Z45!   NOTE - No all repair shop/Dealers reports to Carfax   That is my main concern.  The CARFAX looks way too clean for a 6 year old anything with 164,245 miles.  Even something known for reliability (like many Toyotas) typically has a lot more replaced, like a Nav screen, interior trim, shock/strut, or brake pads.  And surely the last set of tires (installed at ~58k miles) would be bald unless those were all highway miles.   I'm tempted to pay a local dealer to look up the VIN, but am not sure if that will be worthwhile.  Last time I did this, it was 100% useless, and I felt scammed - they noted the bumper was replaced years ago and that's it.  A 5-year old could spot the accident damage, even though nothing was on the CARFAX.   After giving the dealer a call, the truck may have a hard shift, but they have to verify with their mechanic if that's even a concern.  And I've test driven about a dozen of these now, many near Chicago, and half the trucks shift hard/odd at all throttle positions.  The ones with aftermarket lifts/larger tires shift terrible, and 3 stock trucks shifted so violently I thought the transmission valve body was going out.   At this point I'm conflicted, as I need a vehicle, and am coming up short locally.  Northern trucks in this price range tend to have either multiple owners, a lot of mods (lifts/oversized tires without re-gearing), and are generally in rougher shape.   If this truck showed up in your neighborhood for $27k and you had to purchase it sight-unseen, with the possibility of needing a 10L80 rebuild, torque converter, or rear end - would you do it?  I'm convinced most of the 10L80 trucks I test drove are broken, they can't all shift so bad, with massive flares/slipping/lurching and mis-matched downshifts like a teen driver learning stick.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...