Jump to content

Recommended Posts

Posted

I run a 15 6.0 on e85. If u decide to try in this market i would love to see if my trucks mpg gets better. Its horrible now lol

Sent from my SM-G960U using Tapatalk

Posted
On 6/13/2020 at 10:05 PM, davester said:

That's amazing, 10% more MPG with a plastic air guide.  Anyone remember another device, making a remarkably similar claim, but instead of making the air go straight, it was fan shaped so the air went in a special vortex?

 

If something like this actually resulted in even 0.1mpg, when the vehicle is driven the same, GM would already have something like it in the intake YEARS and YEARS ago.  Just like CAI's don't improve MPG...

Yes I do, still have one of each from my 99 5.3 in my big tool box.

 

Vortex TB spacer, and the Tornado Air insert, sounded really cool under WOT, which kind of defeated your mileage increase if there was actually one to begin with.

Posted

I have a 2015 with the 6.2L running on e85 and am willing to help test if your device is compatible. 

Posted
On 6/14/2020 at 9:58 PM, Black02Silverado said:

IMO they could make a vehicle get way better economy than what they do.  To me big oil comes into play and keeps it from happening.  Just my 2 cents.

A lot of truth in that statement.

Posted
2 minutes ago, Jac365 said:

A lot of truth in that statement.

Benz has some race motors that are 50% efficient. Just hasn't made it to the street yet. VW isn't far behind. 

Posted
On 6/14/2020 at 11:20 PM, Grumpy Bear said:

 

What's the science here Sir. Please. It won't be over my head. 

 

BUMP

Posted

I emailed GM, that they should get in on this whole "flow bench" thing, probably will help them a lot in designing and refining their motors.

Posted
On 6/19/2020 at 8:23 PM, cmysstailights said:

I run a 15 6.0 on e85. If u decide to try in this market i would love to see if my trucks mpg gets better. Its horrible now lol

Sent from my SM-G960U using Tapatalk
 

Right now we are just working on the 5.3's and we will be working on the 6.0's. Thanks for asaking

  • Like 1
  • 2 months later...
Posted (edited)

Test Pilot here with some results from late July 2020 to date September 16 2020.

 

- Prior to installation I was getting 17.5 L per 100km using regular unleaded fuel 87% mostly city driving - 2012 GMC Sierra SLT 5.3L

- After install made some longer trips mix highway/city and got numbers around 13.4L per 100km and back to city driving for the last month with numbers holding steady at 14.3L per 100km.

I think longer testing may or may not change numbers but hoping it remains. Saving 3L per 100km is not bad at all.

Just my 2 cents...I think we are onto something.

 

Ralph

Edited by Ralph Ciardullo
Posted
1 hour ago, Ralph Ciardullo said:

Test Pilot here with some results from late July 2020 to date September 16 2020.

 

- Prior to installation I was getting 17.5 L per 100km using regular unleaded fuel 87% mostly city driving - 2012 GMC Sierra SLT 5.3L

- After install made some longer trips mix highway/city and got numbers around 13.4L per 100km and back to city driving for the last month with numbers holding steady at 14.3L per 100km.

I think longer testing may or may not change numbers but hoping it remains. Saving 3L per 100km is not bad at all.

Just my 2 cents...I think we are onto something.

 

Ralph

I think "mostly city" numbers will always be worse the "longer trips mix highway/city" . It's just a thought. ? 

Posted
23 minutes ago, Grumpy Bear said:

I think "mostly city" numbers will always be worse the "longer trips mix highway/city" . It's just a thought. ? 

 

1 hour ago, Ralph Ciardullo said:

- Prior to installation I was getting 17.5 L per 100km using regular unleaded fuel 87% mostly city driving - 2012 GMC Sierra SLT 5.3L

- After install made some longer trips mix highway/city and got numbers around 13.4L per 100km and back to city driving for the last month with numbers holding steady at 14.3L per 100km.

 

"Back to city driving for the last month with numbers holding steady at 14.3L per 100km" 


His city driving numbers were better than before...

  • Like 1
Posted

This would be a hard thing to study on anything but a rolling road. We just had a five day period of lousy fall weather that hammered my mileage then when it passed and it became more seasonal..numbers were restored. Just to many variables as Peppers lifetime chart will point out. Four years worth....

 

Put this truck on an Eddie Brake chassis dyno under a 40 hp load at 55 mph in high gear both with and without.

Record the BSFC both ways. 

 

image.thumb.png.e4cfc89e130ac3f6bdacc37d215f358d.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...