Jump to content

Recommended Posts

Posted

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Posted

Interesting. They can usually be cleaned out through the drain hole. Would have to be something misassembled or misaligned with it being so new. Dash tear downs usually leave you with squeaks and rattles. Good luck.

  • Like 1
Posted (edited)
19 hours ago, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

Edited by BIGDOGx
Posted (edited)
9 minutes ago, BIGDOGx said:

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

Edited by TMD
Posted
26 minutes ago, TMD said:

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

I wish you luck, to have some piece of mind one of those guys on here who did have his dash taken apart did comment that the tech did a rather good job of reassembling it and doesn't think it will be an issue down the road.

Posted

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

Posted
On 7/1/2020 at 3:40 PM, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

Posted
18 minutes ago, ejdziurka said:

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

The only real symptom is water draining onto the floor of the passenger side... It must be getting trapped, pooling up, and then draining when I turn left. It sort of makes a sizzling sound because it's draining through the hot blower motor (which I'm sure will fail now too). Everything else seems to be fine. The A/C is still nice and cold. 

Posted
On 7/2/2020 at 12:24 PM, BlancoSilverado said:

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

Interesting. I'm not sure why the techs couldn't do that instead of removing my dash?? 

  • 2 weeks later...
Posted

I thought I was the only one. Just got mine back from the dealer after 10 days. Truck has less than 4000 miles on it. My issue wasn’t a clogged drain but no hole cut in firewall for the drain to go through.


Sent from my iPhone using Tapatalk

Posted

Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

Posted
Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

Lucky. Mine was completely ripped out and have only had it for 4 months. Seems ok so far and other than a bunch of fingerprints on the center of the windshield


Sent from my iPhone using Tapatalk
Posted

Any way to prevent this from happening? Anyone have a pic of where to snake from if it does clog?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...