Jump to content

DIY Multipro Tailgate Speaker System

Mason603a
 Share

Recommended Posts

Offroadman00 Enthusiast

Offroadman00

Posted
Posted
51 minutes ago, shawnmason01 said:

I have mine working. I had to reprint the parts with PETG filament to make them UV and sunlight resistant. The first ones warped.

 

I wired in a power switch as there are times I will use the system without the tailgate down (for example when camping and I have my hitch in). I also, just ran a standard amp wiring kit along the undercarriage rather than cutting into or modifying my 7pin connection. The 10 Gauge wire was much cheaper than buying the $90 pigtail.

 

BT Controller - https://www.amazon.com/gp/product/B00WVTS4R4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

4" Marine Speakers - https://www.amazon.com/gp/product/B08P7CKXBD/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

USB port - https://www.amazon.com/gp/product/B07SWZRFRS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Wiring Harness and Wire - https://www.amazon.com/gp/product/B08FRRC4RN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1, https://www.amazon.com/gp/product/B01C7O7Z68/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Power Switch - https://www.amazon.com/gp/product/B07P68NFXZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

3d Printer STL Files (I printed them with PETG, and only did supports on the speaker mounts).
 

- Speaker mounts (these have a lip the slides under the tailgate metal, is is tightened down when you screw the speakers in https://www.tinkercad.com/things/cYdAZhWyiD6

 

- Blue Tooth Controller https://www.tinkercad.com/things/j6kqISHpcYt

 

- USB Port Panel - https://www.tinkercad.com/things/ldsRsnBkZs0

 

 

Here are the components I used

IMG_2493.jpg

IMG_2494.jpg

IMG_2495.jpg

Thats all great and all, but just curious, why go this route vs getting the KICKER system thats avail specifically for our tailgates?

I only ask this because you still only have 2 speakers versus the 4 speaker set up which is posted in OP.

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Mason603a
Mason603a

For those of you looking to setup your own MultiPro tailgate speaker system, well HERE YOU GO! Wiring harnesses and amplifier brackets to make your project super easy!! No splicing or hacking away at

Unwrntd
Unwrntd

this is wicked cool!

Unwrntd
Unwrntd

awesome! i can't wait to install this

Posted Images

shawnmason01 Enthusiast

shawnmason01

Posted
Posted
24 minutes ago, Offroadman00 said:

Thats all great and all, but just curious, why go this route vs getting the KICKER system thats avail specifically for our tailgates?

I only ask this because you still only have 2 speakers versus the 4 speaker set up which is posted in OP.

Kicker system ~$600

This ~$150

  • Like 1
Curt Matyjasik New Member

Curt Matyjasik

Posted
Posted
56 minutes ago, Offroadman00 said:

Thats all great and all, but just curious, why go this route vs getting the KICKER system thats avail specifically for our tailgates?

I only ask this because you still only have 2 speakers versus the 4 speaker set up which is posted in OP.

I am an audio engineer and trust me, you only want the 2 speakers.  One for the left channel and one for the right.  When you put 2 speakers playing the same thing next to each other like that, they actually interfere with one another.  The science of it is complicated but its called comb filtering.  Feel free to go down that rabbit hole.  

The basic principle is you put a speaker where you want sound to be.  If you want more volume, use more power to drive that speaker (as long as it can handle it) and not more speakers.

  • Like 1
shawnmason01 Enthusiast

shawnmason01

Posted
Posted
14 minutes ago, Offroadman00 said:

Well that explains it :) lol

Any pics of how you wired everything up?

I don't, i just followed the standard wiring diagram that came in the box. The amp wires were ran thru the tailgate, above the spare tire, then along the chasis, up along the firewall under the hood and to the battery. I used zip ties to secure the wiring .

wade_660 Enthusiast

wade_660

Posted
Posted

The best analogy I can come up with is that it sounds about like playing music through your cell phone speakers vs using Bluetooth through a real radio. You really should listen to one before you buy.


Sent from my iPhone using Tapatalk

GullLakeMi Enthusiast

GullLakeMi

Posted
Posted
On 4/16/2021 at 1:58 PM, Curt Matyjasik said:

I am an audio engineer and trust me, you only want the 2 speakers.  One for the left channel and one for the right.  When you put 2 speakers playing the same thing next to each other like that, they actually interfere with one another.  The science of it is complicated but its called comb filtering.  Feel free to go down that rabbit hole.  

The basic principle is you put a speaker where you want sound to be.  If you want more volume, use more power to drive that speaker (as long as it can handle it) and not more speakers.

Sorry to OP about the tangent, but had to ask...

 

This is a bit extreme, but some wakeboat owners go nuts with multiple tower speakers.  Would they have an issue with comb filtering?

boat image.png

  • 3 weeks later...
jpamp0817 New Member

jpamp0817

Posted
Posted
On 4/16/2021 at 12:06 PM, shawnmason01 said:

I have mine working. I had to reprint the parts with PETG filament to make them UV and sunlight resistant. The first ones warped.

 

I wired in a power switch as there are times I will use the system without the tailgate down (for example when camping and I have my hitch in). I also, just ran a standard amp wiring kit along the undercarriage rather than cutting into or modifying my 7pin connection. The 10 Gauge wire was much cheaper than buying the $90 pigtail.

 

BT Controller - https://www.amazon.com/gp/product/B00WVTS4R4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

4" Marine Speakers - https://www.amazon.com/gp/product/B08P7CKXBD/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

USB port - https://www.amazon.com/gp/product/B07SWZRFRS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Wiring Harness and Wire - https://www.amazon.com/gp/product/B08FRRC4RN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1, https://www.amazon.com/gp/product/B01C7O7Z68/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Power Switch - https://www.amazon.com/gp/product/B07P68NFXZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

3d Printer STL Files (I printed them with PETG, and only did supports on the speaker mounts).
 

- Speaker mounts (these have a lip the slides under the tailgate metal, is is tightened down when you screw the speakers in https://www.tinkercad.com/things/cYdAZhWyiD6

 

- Blue Tooth Controller https://www.tinkercad.com/things/j6kqISHpcYt

 

- USB Port Panel - https://www.tinkercad.com/things/ldsRsnBkZs0

 

 

Here are the components I used

IMG_2493.jpg

IMG_2494.jpg

IMG_2495.jpg

 

This looks so cool, can you provide the 3d print files either through thingiverse or yeggi? 

Jeep Life New Member

Jeep Life

Posted
Posted
On 3/29/2021 at 2:30 PM, shawnmason01 said:

I am trying a slightly different approach on this. I have a 3D printer, so I have designed replacement panels along with panels that have recesses for the bluetooth controller and an aux port.

Once I get the marine speakers in, I will print panels that have mounts for them as well.

Screen Shot 2021-03-29 at 3.29.22 PM.png

Screen Shot 2021-03-29 at 3.29.40 PM.png

Screen Shot 2021-03-29 at 3.29.52 PM.png

 

On 4/16/2021 at 10:06 AM, shawnmason01 said:

I have mine working. I had to reprint the parts with PETG filament to make them UV and sunlight resistant. The first ones warped.

 

I wired in a power switch as there are times I will use the system without the tailgate down (for example when camping and I have my hitch in). I also, just ran a standard amp wiring kit along the undercarriage rather than cutting into or modifying my 7pin connection. The 10 Gauge wire was much cheaper than buying the $90 pigtail.

 

BT Controller - https://www.amazon.com/gp/product/B00WVTS4R4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

4" Marine Speakers - https://www.amazon.com/gp/product/B08P7CKXBD/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

USB port - https://www.amazon.com/gp/product/B07SWZRFRS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Wiring Harness and Wire - https://www.amazon.com/gp/product/B08FRRC4RN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1, https://www.amazon.com/gp/product/B01C7O7Z68/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Power Switch - https://www.amazon.com/gp/product/B07P68NFXZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

3d Printer STL Files (I printed them with PETG, and only did supports on the speaker mounts).
 

- Speaker mounts (these have a lip the slides under the tailgate metal, is is tightened down when you screw the speakers in https://www.tinkercad.com/things/cYdAZhWyiD6

 

- Blue Tooth Controller https://www.tinkercad.com/things/j6kqISHpcYt

 

- USB Port Panel - https://www.tinkercad.com/things/ldsRsnBkZs0

 

 

Here are the components I used

IMG_2493.jpg

IMG_2494.jpg

IMG_2495.jpg

Actually do you have your 3d model or cad file or whatever you used? I'd like to modify the speaker one to use bigger speakers

  • 2 weeks later...
shawnmason01 Enthusiast

shawnmason01

Posted
Posted
On 5/5/2021 at 3:18 PM, jpamp0817 said:

 

This looks so cool, can you provide the 3d print files either through thingiverse or yeggi? 

I posted my thingiverse links where you can download the stl files.

  • 4 weeks later...
  • 1 month later...
TheMaxB New Member

TheMaxB

Posted
Posted
On 4/16/2021 at 11:06 AM, shawnmason01 said:

I have mine working. I had to reprint the parts with PETG filament to make them UV and sunlight resistant. The first ones warped.

 

I wired in a power switch as there are times I will use the system without the tailgate down (for example when camping and I have my hitch in). I also, just ran a standard amp wiring kit along the undercarriage rather than cutting into or modifying my 7pin connection. The 10 Gauge wire was much cheaper than buying the $90 pigtail.

 

BT Controller - https://www.amazon.com/gp/product/B00WVTS4R4/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

4" Marine Speakers - https://www.amazon.com/gp/product/B08P7CKXBD/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

USB port - https://www.amazon.com/gp/product/B07SWZRFRS/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

Wiring Harness and Wire - https://www.amazon.com/gp/product/B08FRRC4RN/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1, https://www.amazon.com/gp/product/B01C7O7Z68/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

 

Power Switch - https://www.amazon.com/gp/product/B07P68NFXZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

 

3d Printer STL Files (I printed them with PETG, and only did supports on the speaker mounts).
 

- Speaker mounts (these have a lip the slides under the tailgate metal, is is tightened down when you screw the speakers in https://www.tinkercad.com/things/cYdAZhWyiD6

 

- Blue Tooth Controller https://www.tinkercad.com/things/j6kqISHpcYt

 

- USB Port Panel - https://www.tinkercad.com/things/ldsRsnBkZs0

 

 

Here are the components I used

IMG_2493.jpg

IMG_2494.jpg

IMG_2495.jpg

 

Did you mount the amplifier inside the tailgate? If so, how did you mount it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • tjonesdfw
      2027 Chevrolet Silverado: Official Discussion

      By tjonesdfw · Posted

      I'm also waiting to see if they confirm Apple CarPlay, because I'm not interested in subscription fees just to use the hardware I already purchased.    In closeups it looks like it gets the Colorado/Canyon center screen based headlight controls which I despise. They also appear to lose all the hard switches for functions like seat heating and cooling, parking sensors, lane control, traction control, etc. which means they're all screen/menu based, so verdict is out on how well those will work with gloves or wet/dirty hands.  Admittedly they don't show the left knee area of the dash, but I don't see hard switches for locker control on the ZR2, and the "mode" switch appears to eliminate the rotary dial with a quick way to access tow/haul.  My 2021 has had multiple screen failures and at times the screen just locks up, goes black, or reboots while driving even after replacement, so loosing the ability to access many of these functions, especially lighting control would be pretty frustrating.   There aren't enough photos or detailed trim details other than one mention of "available microfiber trim" to confirm, but the use of microfiber on the seats and or center console is a deal killer for me.  Just because you drive a ZR2 or High Country, doesn't mean you don't work out of it, and that material is difficult at best to keep clean and looking decent.   Lexus and several other brands are using it on seats, dash, and door panels now, I assume as a cost and weight saving measure,  and it looks horrible 1-2 years into ownership.  I see what appears to be piano black on the doors and center console in some photos, which also has no place in ANY vehicle in my opinion because it mars and scratches too easily, especially for a truck.  Will be interesting to see what GMC comes out with when the Sierra is released as far as materials go.      
    • Back in a Bowtie
      2027 Chevrolet Silverado: Official Discussion

      By Back in a Bowtie · Posted

      Im a fan.  Simply moving the screen up helps the look of the interior.  I feel like GM dropped the ball on the current gen having the screen not at the same level as the top of the gauge cluster.  The GMCs look better with the vents above the screen to close that gap.  
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I hear you, its just not something one would even think of that the new oil in the container isn't filtered to a spec one would expect it to be.    As to a passenger vehicle theme and the maintenance requirement to meet to ensure a warranty is honored, these days with claims of life time transmission fluid on some models and the limited amount of oil changes that would bring one to the end of the factory warranty, that sells vehicles for those that like to hear "easy care maintenance free", but the manufacturer certainly knows different as to what that more than likely means for the longevity of some of the components if given that minimum spec maintenance. Then again I imagine there are a fair number of people that really don't care as long the vehicle gets them a certain number of years down the road because they are the type that want the next new thing, new and improved ... more bells and crap etc on the new one on the show room floor. Manufacturers have learned the phycological game to entice the customer out of their money !
    • Jake87
      2027 Chevrolet Silverado: Official Discussion

      By Jake87 · Posted

      Why soooooo many screens? Shall we just replace the windshield with a large plasma?!?!? Besides that I like the looks. And they added back the additional door cubbies,    No SS???
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery TX

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...