Jump to content

Recommended Posts

Posted
I guess this is a bad place to ask a simple question. Forget it guess. I'll figure it out.
They make those magnet key boxes you can put on the frame rails somewhere.

Sent from my moto g(7) power using Tapatalk

Posted
46 minutes ago, smurfy71 said:

Guess I’ll check back here next year when my app runs out. Or just call AAA if I get locked out.


Sent from my iPhone using Tapatalk Pro

smurfy71.....opening the truck is one thing but how do you get AAA or any other locksmith to start the truck once you get in? If you have lost your keys for whatever reason, how would you drive it?

I was camping years ago, had backed the camper in place, truck was running with A/C on to keep me cool, I accidently locked the doors & as the truck door shut...Oh NO! I couldn't get in the truck, I couldn't turn it off, I was in the middle of the Smokies, no cells at that time (no coverage there even today). Had my diabetic son of 10 with me. Only option at that point was to break a window to get in. THEN, I remembered I had a spare key made & hid it behind the front license plate. It was a life saver. I gave that truck to my son and the key is still there. For the guys here worried about it getting stolen, go ahead and find the truck and you got the key too. 

Posted
38 minutes ago, ammoaddict said:

They make those magnet key boxes you can put on the frame rails somewhere.

Sent from my moto g(7) power using Tapatalk
 

Thanks for the constructive reply but I was hoping to find a more robust idea here than those key holders. I've heard of those falling off or disappearing for what ever reason. 

Posted

Find a spot on the truck and use black electrical tape to completely tape it to that spot up out of the way and covered with enough tape so water and such can't get to it.  Not like anyone is going to crawl under your truck and look for something like that.  To many places you can do it so that it can't really be seen unless you look hard enough.

Posted
smurfy71.....opening the truck is one thing but how do you get AAA or any other locksmith to start the truck once you get in? If you have lost your keys for whatever reason, how would you drive it?
I was camping years ago, had backed the camper in place, truck was running with A/C on to keep me cool, I accidently locked the doors & as the truck door shut...Oh NO! I couldn't get in the truck, I couldn't turn it off, I was in the middle of the Smokies, no cells at that time (no coverage there even today). Had my diabetic son of 10 with me. Only option at that point was to break a window to get in. THEN, I remembered I had a spare key made & hid it behind the front license plate. It was a life saver. I gave that truck to my son and the key is still there. For the guys here worried about it getting stolen, go ahead and find the truck and you got the key too. 



I’m sorry this happened to you, but I’m the 35 years I’ve been driving, I’ve never locked my keys in a vehicle. When we travel, we have two sets with us, I carry one and my wife carries the other. Maybe it’s an occupational hazard, I don’t leave my truck running unless I’m in it. I’ve seen too many get stolen that way.

In you case above, if that happened to me with no spare key, I’d break a window.


Sent from my iPhone using Tapatalk Pro
Posted
Thanks for the constructive reply but I was hoping to find a more robust idea here than those key holders. I've heard of those falling off or disappearing for what ever reason. 
They will fall off if they are stuck to the bottom of something, but if you can find a place where you can sit it on top of something it should stay there. I have one on my old Ford that's been there for years, it's sitting on top of the receiver hitch brace.

Sent from my moto g(7) power using Tapatalk

  • Thanks 1
Posted (edited)

might want to hide it behind the front license plate, drill a 1/4" hole on the key ring part, and use a wing nut to attach it to the lic plate bolt, use your imagination

Edited by flyingfool
Posted
1 hour ago, smurfy71 said:

 

 


I’m sorry this happened to you, but I’m the 35 years I’ve been driving, I’ve never locked my keys in a vehicle. When we travel, we have two sets with us, I carry one and my wife carries the other. Maybe it’s an occupational hazard, I don’t leave my truck running unless I’m in it. I’ve seen too many get stolen that way.

In you case above, if that happened to me with no spare key, I’d break a window.


Sent from my iPhone using Tapatalk Pro

 

 

smurfy71....I usually do the same as you BUT there's always that (1) time. I'm too old to screw around with every thing else. I carry AAA but it always depends where you are with them and if you have cell reception. Otherwise it becomes a BIG DEAL to correct. A spare key (hidden) is a very simple & timely solution to this issue. Do you  not agree?

I just thought this group, with all it's members & mind trust, someone would have a "answer" to the question instead of all the 'other' options.  i.e.  If I wanted to replace a water pump, I wouldn't need direction the an auto mechanic, I'd just want the procedure to change the water pump. Does that make sense. I could pay the $16/month so Onstar would allow me to open it IF I was within cell reception. but what if I'm not & I lost the key? they could open the truck but they sure can't start it for me. Hiding a $25 chipped key is cheap insurance & a good peace of mind, at least for me.

Thanks for your input

Posted
3 minutes ago, rav3 said:

smurfy71....I usually do the same as you BUT there's always that (1) time. I'm too old to screw around with every thing else. I carry AAA but it always depends where you are with them and if you have cell reception. Otherwise it becomes a BIG DEAL to correct. A spare key (hidden) is a very simple & timely solution to this issue. Do you  not agree?

I just thought this group, with all it's members & mind trust, someone would have a "answer" to the question instead of all the 'other' options.  i.e.  If I wanted to replace a water pump, I wouldn't need direction the an auto mechanic, I'd just want the procedure to change the water pump. Does that make sense. I could pay the $16/month so Onstar would allow me to open it IF I was within cell reception. but what if I'm not & I lost the key? they could open the truck but they sure can't start it for me. Hiding a $25 chipped key is cheap insurance & a good peace of mind, at least for me.

Thanks for your input

Completely forgot about these:

 

See the source image

  • Like 1
Posted
1 hour ago, flyingfool said:

might want to hide it behind the front license plate, drill a 1/4" hole on the key ring part, and use a wing nut to attach it to the lic plate bolt, use your imagination

@flyingfool....Good idea. I did this on my old '96 Z71. It's still there today! Unfortunately, my CPO truck doesn't have a front license plate...BUT I would have done this & not post this question. I guess I could buy one & install it (with the spare key)

I'll have to do as you mentioned, "use my imagination." Thanks for input

Posted (edited)
17 minutes ago, JimCost2014 said:

Completely forgot about these:

 

See the source image

GREAT IDEA! I haven't seen this anywhere. Thanks. I'll look for a HitchSafe & see how they work.

 

I found this video....Humm..he picked it in a minute or so.?

 

This guy did it faster, not good but a good idea.

https://youtu.be/ympVA0GW1jE

 

https://youtu.be/_sBn_5dnBDo

Edited by rav3
added video
Posted
1 hour ago, rav3 said:

GREAT IDEA! I haven't seen this anywhere. Thanks. I'll look for a HitchSafe & see how they work.

 

I found this video....Humm..he picked it in a minute or so.?

 

This guy did it faster, not good but a good idea.

https://youtu.be/ympVA0GW1jE

 

https://youtu.be/_sBn_5dnBDo

Don't need this, you just put your keys in the hollow hitch, slide it in the receiver and get a combo receiver bolt lock.  Now it looks just like every other truck with a hitch still in the receiver.

 

combo lock

  • Like 1
  • Thanks 1
Posted
6 minutes ago, Black02Silverado said:

Don't need this, you just put your keys in the hollow hitch, slide it in the receiver and get a combo receiver bolt lock.  Now it looks just like every other truck with a hitch still in the receiver.

 

combo lock

@Black02silverado.....I hadn't thought of this either. Good Idea. Simple & doesn't draw too much attention. I knew there where some great minds on here. Thanks for a good constructive idea.

  • Like 1
Posted

When all the vain people post all the awesome pics of their truck to those people who idolize it just be sure cover your license plate, no one will ever know where you live or where they can find your truck to steal...

 

Tyler

  • Like 1
Posted
@flyingfool....Good idea. I did this on my old '96 Z71. It's still there today! Unfortunately, my CPO truck doesn't have a front license plate...BUT I would have done this & not post this question. I guess I could buy one & install it (with the spare key)
I'll have to do as you mentioned, "use my imagination." Thanks for input
Do it on the rear plate then.

Sent from my SM-J810F using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...