Jump to content

Door Ding prevention

dudleyfj40

By dudleyfj40
in Modifications, Wheels & Tires

 Share

Recommended Posts

Ed/2020RST Enthusiast

Ed/2020RST

Posted
Posted

The only True way to prevent door dings is as someone already said "Defensive Parking"! BUT being disabled I must try to park in a Handicap parking space to avoid a long walk into a business. Therein lies the problem. I live close to a large Army base where there are thousands of others like me that have DV plates so "WIVES" who aren't the tag holder, park in handicapped parking because it's convenient for them and others who don't even have handicapped tags park there to avoid door dings on there BMWs, Mercedes, Jaguars, Vettes etc... Local law enforcement does NOTHING about it!!

TNTSierra Senior Enthusiast

TNTSierra

Posted
Posted
On 9/23/2020 at 2:45 PM, Julio13 said:

251237ed10c65bce4a54733aacf43f33.jpg


Sent from my iPhone using Tapatalk

Those look really nice. Great find. That is the exact place I got a door ding when I bought my truck. Walked out into parking lot and saw the ding. Didn't notice it inside when washing it in bay area. It was a little darker in there.  There is no fixing it either when you get one on the body line of the truck. The way GM made the truck there is a steel barrier there that prevents PDR guys from getting their tools inside the door.

Only fix is to repaint and pull dent from outside, or what the dealer did for me was put a whole new HC back door on from another black HC truck.

Excellent find! And nice looking truck.

dudleyfj40 Enthusiast

dudleyfj40

Posted
  • Author
Posted

I agree, that ridge is just sitting there ready to get hit. Adding protection to that area will help tons. 

 

This is at my work just this morning. Not my Truck, but I'm looking for the owner so I can show him this picture. Not too many ways to defensive parking here with 3 shifts. 

 

IMG_20200925_072022794.jpg

  • Like 1
Julio13 Enthusiast

Julio13

Posted
Posted
Those look really nice. Great find. That is the exact place I got a door ding when I bought my truck. Walked out into parking lot and saw the ding. Didn't notice it inside when washing it in bay area. It was a little darker in there.  There is no fixing it either when you get one on the body line of the truck. The way GM made the truck there is a steel barrier there that prevents PDR guys from getting their tools inside the door.
Only fix is to repaint and pull dent from outside, or what the dealer did for me was put a whole new HC back door on from another black HC truck.
Excellent find! And nice looking truck.

Thank you no problem glad I could help someone out


Sent from my iPhone using Tapatalk
garymcel Enthusiast

garymcel

Posted
Posted

dont try to use touch up paint and try to blend in by buffing my brand new black trailboss got a chip in door i used touch up paint and buffed by hand with a micro fiber cloth and meguires scratch remover and buffed right through the paint and left a brown burn mark the paint on these trucks is garbage body shop guy said it is so easy to take paint right off these cars also talked to paint guy at dealership and he said the same thing just want to warn everyone be very carefull rubbing on these trucks or you will end up having to get the whole door repainted like me

Donstar Senior Enthusiast

Donstar

Posted
Posted
23 hours ago, dudleyfj40 said:

I agree, that ridge is just sitting there ready to get hit. Adding protection to that area will help tons. 

 

This is at my work just this morning. Not my Truck, but I'm looking for the owner so I can show him this picture. Not too many ways to defensive parking here with 3 shifts. 

 

IMG_20200925_072022794.jpg

Great picture c/w new GM truck! This is exceptionally common and reminds me of a personal story.  In '78 we bought a '78 Econoline van.  We bought it specifically to allow us and our two toddlers to sleep in on long trips.  My new job took us 1k miles from both of our large families so this trip was made often.  One night we pulled into an empty mall parking lot at about 3 AM. We had both worked the day before and were exhausted.  We woke up to a car door banging on the side of our beautiful van!  In the time it took us to get ourselves and the kids ready for travel we took at least three hits!  (both sides)  The resulting dings blended in nicely with rock chips from travelling the then unpaved Alaska Highway! ? 

  • 2 weeks later...
Okievision Enthusiast

Okievision

Posted
Posted
On 9/23/2020 at 6:22 PM, dawg99 said:

I put stainless ones on mine.

https://www.ebay.com/itm/4pc-1-1-2-Wide-Stainless-Body-Side-Molding-for-2019-20-GMC-Sierra-1500-Crew-Cab/173977602994?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

What's your thought on these? I just installed them too and not sure what I expected but they seem pretty thin and the stainless doesn't really match the chrome on the "SIERRA" door badges. I'm on the fence about removing them.

dudleyfj40 Enthusiast

dudleyfj40

Posted
  • Author
Posted

I got them on, but not before hopefully my last door ding in that area. They are not noticeable at all. Love em.

 

IMG_20201004_150723585_HDR.jpg

BassNBrew Enthusiast

BassNBrew

Posted
Posted

Great find. I'm all over these.

Even though I park as far away as I can I still come out to people parked next to me.  Had a brand new Honda Ridgeline right next to my lifted AT4 on 35's the other day...it looked very cute.

TA^Guy Enthusiast

TA^Guy

Posted
Posted

Thanks for sharing the link.   

 

I went from a 2015 SLT to a 2020 SLT, my 2015 had chrome ones from the factory and that truck didn't have a single door ding in it over the 5 years of ownership.   I've been tempted to remove the "Sierra" off the door and install OEM ones from a '14-'15 on my Quicksilver 2020.

 

Yes I ALWAYS park far away, and/or along a curb to at least protect one side of my truck.   But it's not always possible, especially when we go to sporting events where you're lucky to find an open parking spot, let alone one that's big enough for a truck.

 

 

 

  • Like 1
dudleyfj40 Enthusiast

dudleyfj40

Posted
  • Author
Posted
20 hours ago, Red42 said:

Can you cut them down to fit because I dont want to remove the AT4 emblem?

I would think so., you would need to touch up with paint of course.

 

Where they meet at the front and back doors are cut straight up and down, the other ends are angled.

I would think that would be the place to take off a couple of inches in needed. 

  • 4 weeks later...
Enough Enthusiast

Enough

Posted
Posted

Well after 2 storms I finally got the sides of the truck cleaned up enough to put the moldings on. It should have come this way from the factory.

IMG_7489 - Copy.jpg

IMG_7488 - Copy.jpg

IMG_7490 - Copy.jpg

  • Like 2
Dunn Senior Enthusiast

Dunn

Posted
Posted
On 9/23/2020 at 8:59 AM, diyer2 said:

No door guards. People guards. Park away from the crowds. Sure, you'll get the car parked next to you when there was plenty of spaces around. IMO they parked out back for the same reason.

Besides the walk will do you good. 

this is what i do......can care less about an extra 40 steps, i walk all day at work anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • garagerog
      Low fuel pressure after installing new fuel pump

      By garagerog · Posted

      Replace the fuel pump with an OEM AC-Delco.
    • Gilkey96
      Low fuel pressure after installing new fuel pump

      By Gilkey96 · Posted

      Hello, first time posting here. I have an 03 Chevy 1500HD with the 6 liter gas engine. The truck ran fine until the fuel pump died on me and had to get it towed. Replaced the fuel pump with a precision pump from O’rileys and changed the fuel filter while I was there. The truck will run and drive now but it wants to idle around 500 rpm when in drive and it tries to stall if you touch the gas. It drives fine though, just doesn’t want to idle. Put a fuel pressure gauge on the rail and only have 50 psi. I guess these trucks should have 55-62 psi to run right. I thought the regulator might be the issue because when I would unplug the vacuum hose it jumped to 56 psi. Replaced the regulator and no change. The only thing I can think of is that I was sold a faulty fuel pump. Any help would be appreciated because I’d rather not have to take the bed off again if I don’t have too. Thank you!
    • diyer2
      AFM Experience

      By diyer2 · Posted

      I've been wrenching on GM trucks for 17 years. And I need to get something off my chest because it's been weighing on me for a long time. After all that time, all those motors, all those people standing in my bay, I've figured out there are really only two kinds of owners. The ones who already know about this. And the ones who are about to find out the hard way. A guy came into my shop a few weeks back in a 2018 Silverado 5.3. Sharp guy, maybe 35. Knew his truck cold. He'd been on the forums, read the threads, done his homework. He only rolled in so I could double-check a little module he'd already plugged in himself. Wanted a second set of eyes on it. Ten minutes, in and out, drove off happy. Two days later, a completely different story walked through the same door. Older fella this time, in a 2016 Sierra. Gorgeous truck, clearly babied, not a scratch on it. Wedding ring. Looked like a guy who took care of his stuff. He was in because his engine had started knocking on the way to work. And by the time I got the valve cover off, I already knew it was too late. Lifter collapsed. Cylinder 5. Camshaft chewed up. The whole top end shot. Same kind of truck. Same motor. Same roads, probably the same dealer. The only thing separating those two men was information. I've been at this since 2008, and I've worked on everything GM puts out. Silverados. Sierras. Tahoes. Yukons. Suburbans. Escalades. The 5.3 and the 6.2. Doesn't matter which badge is on the tailgate. They all carry the same problem. So here's the information one of those guys had and the other one didn't. It's called Active Fuel Management. AFM. GM started building it into their V6s and V8s back in 2007 to squeeze out a little better mileage on the highway. Maybe a mile or two a gallon. All to hit government fuel economy numbers. The way it works, the motor quietly shuts down half its cylinders when you're just cruising along. And the little lifters that pull that off have a tiny pin inside them that's constantly clicking in and out. Lock, unlock, lock, unlock. Hundreds of times a drive. Thousands of times a week. Eventually one of those pins wears through. The lifter drops. And it starts grinding the camshaft down like a chisel on butter. And what nobody tells you is that the shudder you feel around 40 or 50 mph? That's the system cycling. Every single time. Here's what really gets me. The pre-2007 trucks, the ones without AFM, they're bulletproof. I've got customers still daily driving them with 260,000 miles on the odometer. Not a problem in the world. GM took a perfectly good motor that would have lasted a lifetime and bolted this system onto it. And it is wrecking engines that should have run forever. The guys who hang around the forums already know all of this. So do the techs. They handled this years ago. They didn't sit around waiting for the dealership to mail them a warning letter, because that letter is never coming. It's the guys who figured somebody would've told them who end up on my lift. And I want to be clear, because this part matters. Maintenance has nothing to do with it. I've torn down motors with barely 30,000 miles on the clock. I pulled apart a Tahoe last summer with 24,000 on it. Practically a brand new truck. Owner had it less than a year. Spotless oil. Best synthetic money can buy, changed early every time. Made no difference. I've seen guys with full dealer records, every interval stamped. Made no difference. The oil changes were never the problem. The pin was. And no amount of babying that truck stops that pin from cycling every single time you drive. That's the part that eats at me. These are good motors. Take the AFM out of the equation and a 5.3 or a 6.2 will run 300,000 miles and never blink. So a few years ago I started telling every single owner who comes through my doors the exact same thing the smart guys already knew. Get yourself a FullForce disabler. It plugs right into the port under your dash. Couple of seconds and you're done. It just tells the computer to leave every cylinder running, full time. No more cycling. No more beating those lifters back and forth every time you turn the key. It doesn't reprogram anything. Doesn't touch your tune. And unplug it before a dealer visit and there's absolutely zero trace it was ever installed. I've had customers come back at 40,000, 60,000, 80,000 miles after I put one in. Zero issues. The trucks run smoother. And the lifters aren't getting beaten to death every single drive. I won't sit here and tell you it's magic. A lifter that's already damaged is a lifter that's already damaged, and this won't un-ring that bell. But it takes away the one thing causing all that wear in the first place. That's the whole game. You don't need a five-thousand-dollar delete. You don't need an expensive tune. You don't need to tear anything apart. You just need to stop the cycling. I'm not writing this for any company. I'm writing it because I'm tired of watching the guys who didn't know pay four and five figures for it. I'm tired of being the guy who has to break the news. I'm tired of knowing that the guys who did know fixed the whole thing for the price of a tank of gas, and the only difference was that somebody told them first. If you drive a Silverado, Sierra, Tahoe, Yukon, Suburban, or Escalade from 2007 or newer with a V6 or V8, you've got AFM. You've got those lifters, and they're cycling every single time you drive. So be the guy who already knew. Not the one I'm scraping metal out of next month. EDIT: A bunch of folks asked, so here it is. The one I put my faith in is FullForce. This is where to find it: https://www.tryfullforce.com/products/fullforce™-afm-dfm-disabler They back it with a 60-day guarantee too. I've handed out more than I can count and not one's ever come back to me. Not one. See less
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks for following along. I'm not author material, my tenses are all over the place and an editor would have a heck of a time cleaning up after me. Reading and writing is still a fun pastime though.   My new scanner came in yesterday, wow, where the heck has this thing been?! It connects right up to the Blazer, there's all kinds of bidirectional tests like EGR activation and percentage, toggle the fuel pump relay, EVAP purge valve, IAC control, AC relay, reset the transmission's adaptive learning, toggle shift solenoids and TCC lockup, and I can reset fuel trims with the click of a button...all things I could have used over the last 60 days!   It's also telling me there is a stored code in the ABS module for front left wheel sensor open and something about the brake switch. The ABS dash light works. It illuminates normally during the self-test at key on/ start and that's it. I cleared the codes and will see if they set when I take it out later. That, and I'm going to get (hopefully) real data on timing and cam ******. The PID's are there.   I connected the tool to my truck...holy smokes. Newer vehicles make early OBDII vehicles look like 8-bit, pixelated, early Nintendo stuff. This? This is like wearing 3D virtual reality goggles playing one of those elaborate, cinematic video games with seasons and plots in comparison. There are SO MANY modules and SO MANY tests and SO MUCH data. There's a scanner sequence for filling the coolant...   End of the day, it's a tool with way more power than I need, but the versatility to do old and new is there (and I need an adapter to connect it to my OBDI Camaro). It will allow me to do the first pass of diagnosis when out-of-warranty vehicles need help, and it will enable more DIY maintenance like brake system bleeding, ABS bleed, etc. I probably over-bought here, but, mission is accomplished.   Enjoy your Sunday...I need to shut this machine down and go get ready for the week ahead.
    • MORSNO
      Which 2027 engine will you choose?

      By MORSNO · Posted

      Not that I've read, after all the issues they've had in the past I'm pretty sure they learned their lesson. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...