Jump to content

MERRY CHRISTMAS GUYS

dieselfan1

By dieselfan1
in The Off-Topic Bar

 Share

Recommended Posts

dieselfan1 Senior Enthusiast

dieselfan1

Posted
Posted

 

 

Hope Santa brings you lift kits and new wheels and a pro charger and some running boards maybe a set of rock lights or a new tires or a brembo brake kit or a subwoofer box and some new speakers maybe a case of Amsoil([emoji24]) or a stubby antenna or tow mirrors or a tonneau cover or some killer coilovers or maybe just some weather tech mats.[emoji2957]

Been a fun year on here even with all the covid bs.

 

Sent from my Pixel 3 using Tapatalk

 

 

 

 

  • Like 1
  • Haha 1
2018GMC Senior Enthusiast

2018GMC

Posted
Posted (edited)

spacer.png

 

Edited by 2018GMC
  • Like 3
JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)

Sh@tters full!!!!

 

Guess that would be a great way to describe 2020...

 

Hope everyone has a Very Merry Christmas!!!! 

Edited by JimCost2014
  • Like 1
RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

Merry Christmas [emoji319]


Sent from my iPhone using Tapatalk Pro

flyingfool Senior Enthusiast

flyingfool

Posted
Posted

merry Christmas.!.

what kind of  presents are you getting your family this year?  I'm wrapping up cans of Beans , bags of Rice, Pasta  and an assortment of ammunition to hide around the house.

*2021 might get rough, i hope it calms down.

  • Like 1
Likarok Senior Enthusiast

Likarok

Posted
Posted (edited)

Well lets hope 21 is a whole hell of a lot better than 20. We will get through it guys. Have a great day tomorrow and Have a drink on me!

Edited by Likarok
  • Like 1
GPGuy Senior Enthusiast

GPGuy

Posted
Posted

Merry Christmas to all of you guys too!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Jumped up 15 cents yesterday. $4.15
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I have never seen GM instructions for the other trucks as per the HD with the 6 speed or the half tons but had got the impression that the HD trucks with the 6 speed were not having the same problem that the 10 speed and pan presented. Also video that I have seen of the HD 10 speed with the gas engine starting in 2024 model year showed that it was a real struggle to even make it work when pulling down hard on the exhaust after undoing the exhaust hanger bracket on the side of the transmission as after all there is little room for the pipe to even go down behind the Y joint as it soon would hit a frame cross member. Also that they had tried just like I did with the gasket off and no way was that pan coming out any way they tried to manipulate the pan. From that as well as the local transmission shop talking about the pain in the rear issue, I was not expecting my pan to come out because GM shows it was not even intended to come out without dealing with the exhaust piping.    It would be nice to claim, here's what you do and its easy to remove the pan guaranteed on any HD truck with the gas 10 speed but dollars to donuts the next guy trying what I did would not have the same luck as the exhaust was just manufactured slightly different and be pissed off at my claim that the pan comes out with no issue. Its more of a try and see if your particular truck might work like mine did .... or not !. 
    • carkhz316
      Correct way to service 2024 l8t allison trans?

      By carkhz316 · Posted

      Sorry I didn't see this until now, but it works on both the 6 speed and 10 speeds, as well as all the half tons too.
    • 1998sleaze
      Engine vibration after motor mount replacement.

      By 1998sleaze · Posted

      Hello, I have a 2018 GMC Sierra 1500 that I recently changed both motor mounts on due to the driver's side being blown out. After replacement I seem to have a steady vibration that I can feel in the pedals and the back of the seat. At this point I'm convinced that the aftermarket "Anchor" branded mounts I used are not performing as well as OE, the only real reason I ended up using the mounts in question was because my local dealers were out a few months to get a Driver's side mount. I've tried "Neutralizing" the mounts according to the motor mount TSB published for these truck to no avail. My trans mount is also in great shape and seems to be absorbing vibrations swimmingly. As far as I can tell there is no issues idling, my idle RPM is steady and I've recently put GM plugs and wires on, however, I have not cleaned the throttle body or intake valves. Any one else have a similar experience with aftermarket mounts? Patience certainly is a virtue that I wish I exercised here. Thank you!
    • CamGTP
      Winter Returned

      By CamGTP · Posted

      I still saw people out for runs, on their bikes/motorcylces, jeeps with the doors off driving around here the past 2 days. I guess we are just used to it here haha.   Tasted like a bonfire the last 2 days.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...