Jump to content

Recommended Posts

Posted

So, I thought I would give this a try, about $1:45 a gallon cheaper than regular pump gas, 100+ octane too. It really woke things up, I did not expect it, instant HP.. I didn't know 100 octane was offered with E85, what about in your area and your experience? I live in So Cal.

https://ibb.co/JcfSgHS

 

Posted
16 minutes ago, beetle said:

So, I thought I would give this a try, about $1:45 a gallon cheaper than regular pump gas, 100+ octane too. It really woke things up, I did not expect it, instant HP.. I didn't know 100 octane was offered with E85, what about in your area and your experience? I live in So Cal.

https://ibb.co/JcfSgHS

 

E85 is great for power but not great for MPG.  Won't hurt anything by running E85 daily either.

 

https://afdc.energy.gov/fuels/ethanol_benefits.html#:~:text=A gallon of ethanol contains,economy when operating your vehicle.&text=For example%2C E85 that contains,lessens as ethanol content decreases).

  • Like 2
Posted

I love the power e85 provides, but it definitely hurts the mpgs. Usually run e85 most of the time then run a tank or 2 of premium every once in a while.

Sent from my SM-G998U using Tapatalk

  • Like 1
Posted
E85 is great for power but not great for MPG.


Even with poor mpg it comes down to cost per mile. In my area it’s usually $1 less than premium.

$2.00/gal E85 @ 14 mpg is better than $3/gal @ 20mpg.

I’ve run a mix attempting to get around E30. I only see about 2 mpg less overall and save $20 per fill-up comparing to premium.
  • Confused 1
Posted

It was definitely worth it to me in my 2014. Twenty five horsepower hell yea. In my case my local Kroger had it. With the Kroger’s card it was cheaper. On trips I ran regular gas. I always had hand held tuners. In this case I left the engine tuning alone.


Sent from my iPhone using Tapatalk

Posted

What's the cost of a good e85 conversion kit?
5.3L

Sent from my SM-N976V using Tapatalk

Posted

The added pep and lower purchase price of E85 are a treat and I will choose it when convenient.   However, the treat is not significant enough for me to go too far out of my way!   

Posted
1 hour ago, MY164X4 said:

What's the cost of a good e85 conversion kit?
5.3L

Sent from my SM-N976V using Tapatalk
 

The parts and wiring connector is maybe $60-70 to do it the cheaper way. The sensor and a couple fittings/plastic lines to connect to the tank and fuel line. Otherwise I think DSX Tuning offers a full kit for a few hundred dollars but you still have to wire in the sensor from the harness that is down on the frame.

 

Plus you need to tune for it. No way I'd ever put a full tank of E85 in a truck that isn't tuned for it.

  • Like 1
  • Thanks 1
Posted
3 hours ago, CamGTP said:

The parts and wiring connector is maybe $60-70 to do it the cheaper way. The sensor and a couple fittings/plastic lines to connect to the tank and fuel line. Otherwise I think DSX Tuning offers a full kit for a few hundred dollars but you still have to wire in the sensor from the harness that is down on the frame.

 

Plus you need to tune for it. No way I'd ever put a full tank of E85 in a truck that isn't tuned for it.

I've been working on E85 for a little while for my 2018 and didn't like the DSX kit mostly because the sensor harness is already on the trucks and the DSX kit pins into the ECM connector directly as the sensor is located above driver side valve cover.  Bought a CJ Tunes kit a while back which mounts near factory placement and uses the existing harness but instead I'm putting together all the OEM fuel lines.  Just missing the main supply line, still working on getting the correct part number which has been challenging.  Plan on a spring project and a write up on here!  (Also ditching the capless fill at the same time.)

 

 

Posted

x2 what Cam said. I used a fitting order off Rock Auto, boiled it to straighten a bend and threw it in. No problems at all and it's been 6 months. 

 

If you already have money invested in the CJ tunes kit - just use it! Cutting and flaring fuel line is easy. Far easier than replacing the entire lines. 

 

Posted
20 hours ago, beetle said:

So, I thought I would give this a try, about $1:45 a gallon cheaper than regular pump gas, 100+ octane too. It really woke things up, I did not expect it, instant HP.. I didn't know 100 octane was offered with E85, what about in your area and your experience? I live in So Cal.

https://ibb.co/JcfSgHS

 

I have yet to see (Northern Illinois) the price low enough to make the cost per mile worth the loss in efficiency. Kid you not, last week the cheapest E-85 in my area was 50 cents a gallon MORE than Costco's 87 and only a few cents cheaper than their 93. Even some Casey's stores the E-85 was a nickel higher than 87. As I haven't any power adders..... :dunno:

 

Dad lives in Iowa and there....it makes sense. Normally 30% less. 

 

 

Posted
1 hour ago, lucas287 said:

x2 what Cam said. I used a fitting order off Rock Auto, boiled it to straighten a bend and threw it in. No problems at all and it's been 6 months. 

 

If you already have money invested in the CJ tunes kit - just use it! Cutting and flaring fuel line is easy. Far easier than replacing the entire lines. 

 

I definitely do not disagree with you guys but I like doing the digging and the leg work!  Carl's kit seemed the best and easiest way to go.  I already posted the kit on here for sale before this thread got started and ordered half my OE lines.  Plan to share everything once I get under the truck when it warms up a little and the snow melts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,925
    Total Members
    8,960
    Most Online
    btm
    Newest Member
    btm
    Joined
  • Who's Online   4 Members, 1 Anonymous, 1,575 Guests (See full list)

  • Latest Articles

  • Posts

    • Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • 2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...