Jump to content

Recommended Posts

Posted

I have a 2019 SLT without the NHT/Max Tow, but with the Z82 trailering package, factory trailer brake controller, trailering app, and the IOT radio.  The truck did not come with the trailer TPMS; not only did it not come with the sensor, but it also didn't come with the module that goes behind the rear license plate.  Not realizing that a separate module was needed, I ordered the sensors first.  That obviously did nothing, as the truck did not recognize them.  So I then ordered the module from eBay.  My truck had the wiring harness already ran to module location, so when the module arrived I just plugged it in.  The trailering app immediately recognized the module and gave me an option to set up the trailer TPMS sensors.  No dealer programming necessary.  It was all plug and play.  I had America's Tire install the sensors, and I then used my TPMS tool (Amazon, same one for doing tire rotations) to program them.  It works perfectly.  The trailering app now displays the tire pressure and temperature for all 4 trailer tires.

 

Just thought I'd put this out there in case anyone is wondering if this can be added.  I read a GM tech article where the writer indicated that it could NOT be added after-the-fact, but that is clearly not the case.

 

Here were the items I purchased to make it all work:

  • Sensors, part #84152501.  $65 new on eBay for a set of 4.
  • Module, part #84458180.  $77 new from GMPartsDirect.com

 

All-in for about $150.  

 

  • Like 7
Posted
On 3/9/2021 at 12:30 AM, bamorris2 said:

I have a 2019 SLT without the NHT/Max Tow, but with the Z82 trailering package, factory trailer brake controller, trailering app, and the IOT radio.  The truck did not come with the trailer TPMS; not only did it not come with the sensor, but it also didn't come with the module that goes behind the rear license plate.  Not realizing that a separate module was needed, I ordered the sensors first.  That obviously did nothing, as the truck did not recognize them.  So I then ordered the module from eBay.  My truck had the wiring harness already ran to module location, so when the module arrived I just plugged it in.  The trailering app immediately recognized the module and gave me an option to set up the trailer TPMS sensors.  No dealer programming necessary.  It was all plug and play.  I had America's Tire install the sensors, and I then used my TPMS tool (Amazon, same one for doing tire rotations) to program them.  It works perfectly.  The trailering app now displays the tire pressure and temperature for all 4 trailer tires.

 

Just thought I'd put this out there in case anyone is wondering if this can be added.  I read a GM tech article where the writer indicated that it could NOT be added after-the-fact, but that is clearly not the case.

 

Here were the items I purchased to make it all work:

  • Sensors, part #84152501.  $65 new on eBay for a set of 4.
  • Module, part #84458180.  $77 new from GMPartsDirect.com

 

All-in for about $150.  

 

You have a picture of the installed module? Can one see it by taking the rear plate off?

Posted
You have a picture of the installed module? Can one see it by taking the rear plate off?

Sorry I don’t have my truck at the moment. But if you take off your rear license plate, you can quickly and easily tell them if you have the module or not. If you want to post a picture of yours, I can tell you.
Posted

Sorry I don’t have my truck at the moment. But if you take off your rear license plate, you can quickly and easily tell them if you have the module or not. If you want to post a picture of yours, I can tell you.

Not my picture, but one I found online. The module is the rectangular box on the right, that says MADE IN UK and SCHRADER ELECTRONICS.

 

52489a817cb26f0ded58a25fa9bc0d47.jpg

Posted
23 minutes ago, bamorris2 said:


Sorry I don’t have my truck at the moment. But if you take off your rear license plate, you can quickly and easily tell them if you have the module or not. If you want to post a picture of yours, I can tell you.

Thanks for taking the time.

20210313_151922.jpg

Posted
20 minutes ago, bamorris2 said:

Not my picture, but one I found online. The module is the rectangular box on the right, that says MADE IN UK and SCHRADER ELECTRONICS.

 

52489a817cb26f0ded58a25fa9bc0d47.jpg

Thanks, guess I should have hit refresh before posting!

Posted
I have a 2019 SLT without the NHT/Max Tow, but with the Z82 trailering package, factory trailer brake controller, trailering app, and the IOT radio.  The truck did not come with the trailer TPMS; not only did it not come with the sensor, but it also didn't come with the module that goes behind the rear license plate.  Not realizing that a separate module was needed, I ordered the sensors first.  That obviously did nothing, as the truck did not recognize them.  So I then ordered the module from eBay.  My truck had the wiring harness already ran to module location, so when the module arrived I just plugged it in.  The trailering app immediately recognized the module and gave me an option to set up the trailer TPMS sensors.  No dealer programming necessary.  It was all plug and play.  I had America's Tire install the sensors, and I then used my TPMS tool (Amazon, same one for doing tire rotations) to program them.  It works perfectly.  The trailering app now displays the tire pressure and temperature for all 4 trailer tires.
 
Just thought I'd put this out there in case anyone is wondering if this can be added.  I read a GM tech article where the writer indicated that it could NOT be added after-the-fact, but that is clearly not the case.
 
Here were the items I purchased to make it all work:
  • Sensors, part #84152501.  $65 new on eBay for a set of 4.
  • Module, part #84458180.  $77 new from GMPartsDirect.com
 
All-in for about $150.  
 
Thanks for the info!

Sent from my Pixel 4 XL using Tapatalk

  • 2 months later...
Posted
On 3/14/2021 at 6:25 AM, sldhead700 said:

My truck had the wiring harness already ran to module location,

 

I have a '19 3500 Denali. It has the Z82 trailering package, factory brake controller, 5th wheel prep, but a different radio (I06) and RPO JK1 - TPMS Delete. I looked at the back of the truck and did not see an additional wiring harness. So in addition to the module I'm guessing I'll need that harness too. Any input is appreciated.

 

Posted

So right now my trailer app in the truck only gives me the option for the light check. If i get the module and tpms sensors, then i'll have the availbilty to monitor the trailer tires? I thought that the software in the truck was different to be able to have that ability...could be because I have an RST without the advanced trailering package?

  • 2 months later...
Posted

I also have an RST and all I get on the trailer app is a light test.  I decided to just try adding the module to see what would happen.  I still just get the light test.  To the OP, prior to adding the module did you only get a light test option or did it give you other options?  I'm curious because I had trouble getting the plug into the module (thought it should have been easy) and I want to be sure I didn't mess up the harness in the process.  

  • 1 month later...
Posted

I'm interested in this too. I have an LT with the larger radio (Sirius XM, HD radio, etc), but my trailer setup only includes the light test.

I checked and I don't have the module, it sounds like it takes more than just buying the module, maybe a flash from the dealer?

  • 6 months later...
Posted
On 3/9/2021 at 1:30 AM, bamorris2 said:

I have a 2019 SLT without the NHT/Max Tow, but with the Z82 trailering package, factory trailer brake controller, trailering app, and the IOT radio.  The truck did not come with the trailer TPMS; not only did it not come with the sensor, but it also didn't come with the module that goes behind the rear license plate.  Not realizing that a separate module was needed, I ordered the sensors first.  That obviously did nothing, as the truck did not recognize them.  So I then ordered the module from eBay.  My truck had the wiring harness already ran to module location, so when the module arrived I just plugged it in.  The trailering app immediately recognized the module and gave me an option to set up the trailer TPMS sensors.  No dealer programming necessary.  It was all plug and play.  I had America's Tire install the sensors, and I then used my TPMS tool (Amazon, same one for doing tire rotations) to program them.  It works perfectly.  The trailering app now displays the tire pressure and temperature for all 4 trailer tires.

 

Just thought I'd put this out there in case anyone is wondering if this can be added.  I read a GM tech article where the writer indicated that it could NOT be added after-the-fact, but that is clearly not the case.

 

Here were the items I purchased to make it all work:

  • Sensors, part #84152501.  $65 new on eBay for a set of 4.
  • Module, part #84458180.  $77 new from GMPartsDirect.com

 

All-in for about $150.  

 


good afternoon

 

I have a 2020 Silverado 1500 LT trail boss that does not have the advanced trailering package 

 

I purchased the module you recommended above when I plugged it in in the rear of the truck behind the license plate and turned the truck on it did not recognize it nor when I plugged in my trailer

 

I believe I have the iOS radio .  Is there anything I need to do to get this to work?  Any type of computer flash in the OBD-II?

 

we are leaving on a camping trip in two weeks so I was hoping to have this done soon anyway advice would be much appreciated

  • 2 weeks later...
Posted

Hi SoxFan904... Did you figure out why it didn't work, I have a 2020 RST with the IOS radio and Z82 trailer pack. Would like to try it as well but don't want to spend the money if it doesn't work. Perhaps a GM dealer can program the module? Any info you can provide is appreciated. Thanks. 

Posted
On 5/15/2022 at 9:15 PM, 66canss said:

Hi SoxFan904... Did you figure out why it didn't work, I have a 2020 RST with the IOS radio and Z82 trailer pack. Would like to try it as well but don't want to spend the money if it doesn't work. Perhaps a GM dealer can program the module? Any info you can provide is appreciated. Thanks. 

I have the Z82  in my Codes but I was not able to figure it out.  I installed the module I bought in the back of the truck and it did nothing, even when I hooked up to my Camper.  My Truck ONLY has the trailering app.  I am going on a trip soon with my camper, so I didn't want to take the chance of having the valve stems replaced with the GM ones I bought and have it still not work. 

 

My understanding is that it was something available from the factory and cannot be programmed, but I cannot find a definitive answer on that.  I was hoping it could be an "upgrade" I could buy.  I contacted my dealership and they were unsure as well.    I'll provide any updates if I have them, as I am going to try again to reinstall it and maybe have a valve put on my spare tire as a test.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
    • The use of absolutes like "always" to describe gear selection, and giving free advice at a boat ramp sounds like a recipe for disaster. It's a boat ramp, not a farm, for starters.   IMO gear selection should depend on the obstacle. If low range is working and this is a slower speed, controlled ordeal, I'd keep using that.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...