Jump to content

Recommended Posts

Posted

i have to say my GMC 5.3 8 speed feels better than my 19 RST 5.3 8spd......i dont know if its a fact, but it feels peppier with better shift points and more power.....i had a 2500 6.6l in between these trucks and am pretty sure GM didnt change anything but it certainly does feel like they refined it......GMC vs chevy idk, and its probably the exact same it just feels different......the whole truck just feels more refined than my 19....weather seals, tightness of door closing, noise, steering, motor, tranny, it just feels like different truck but the same all in one.....

Posted
50 minutes ago, Dunn said:

i have to say my GMC 5.3 8 speed feels better than my 19 RST 5.3 8spd......i dont know if its a fact, but it feels peppier with better shift points and more power.....i had a 2500 6.6l in between these trucks and am pretty sure GM didnt change anything but it certainly does feel like they refined it......GMC vs chevy idk, and its probably the exact same it just feels different......the whole truck just feels more refined than my 19....weather seals, tightness of door closing, noise, steering, motor, tranny, it just feels like different truck but the same all in one.....

That's easy --GMC>>>>>Chevy

Posted
16 minutes ago, f8l vnm said:

That's easy --GMC>>>>>Chevy

maybe so.......i would probably continue to buy GMC over Chevy though from now on after owning both of same trim ( RST vs Elevation) and body style of new T1 gen.....certainly feels like a " tighter more refined" truck for sure

Posted

Goes without saying that there were likely a LOT of small refinements between 19 and 21. Slight tweaks in the manufacturing process and the parts themselves, tuning changes, etc...all done on the fly and without any fanfare. Probably accounts for more of the difference than Chevy vs GMC.

Posted
That's easy --GMC>>>>>Chevy


They’re literally the same.

And my GMC gave me all the problems in less than 10k miles while my Chevy has given me none in over 30k miles.


Sent from my iPhone using Tapatalk Pro
Posted
12 hours ago, Jav_eee said:

 


They’re literally the same.

And my GMC gave me all the problems in less than 10k miles while my Chevy has given me none in over 30k miles.


Sent from my iPhone using Tapatalk Pro

 

Did you really take my comment as being serious ? lol I'm very well aware they are the same 

Posted
15 hours ago, OnTheReel said:

Goes without saying that there were likely a LOT of small refinements between 19 and 21. Slight tweaks in the manufacturing process and the parts themselves, tuning changes, etc...all done on the fly and without any fanfare. Probably accounts for more of the difference than Chevy vs GMC.

probably so....

Posted
Did you really take my comment as being serious ? lol I'm very well aware they are the same 


You never know these days..


Sent from my iPhone using Tapatalk Pro
Posted
20 minutes ago, Jav_eee said:

 


You never know these days..


Sent from my iPhone using Tapatalk Pro

 

fair enough :)  But GMC is still better! 

Posted
16 hours ago, f8l vnm said:

fair enough :)  But GMC is still better! 

Don't know if it's better, but the Chevy is fancier than the GMC.  It wears a bowtie everywhere it goes.  :chevy:  LOL

  • Like 1
  • Haha 1
Posted

Just drove a new tahoe with the 5.3 and 10speed and I was very impressed. I know the tahoe gained some weight but it felt as peppy as my inlaws denali xl with the 6.2 and 8speed. Might lose in a flat out drag race but eh thats not going to happen anyways.

Sent from my ONEPLUS A6013 using Tapatalk

Posted
On 3/10/2021 at 9:29 PM, SilveradoRST said:

What roughness are you experiencing with the 8 speed?

Extremely jerky in cold mornings. My remedy is to start it from a distance as I walk towards it. Give it about 30 seconds then it's way smoother.

Warm, it's fine.

Posted
On 3/13/2021 at 7:03 PM, Wiggums said:

Extremely jerky in cold mornings. My remedy is to start it from a distance as I walk towards it. Give it about 30 seconds then it's way smoother.

Warm, it's fine.

Same here. Whenever I fire mine up, back right out of the driveway and head off, I get a bit of a funky slip in shift from 1-2 about a half block away from home. 

 

2019 5.3L / 8spd in my RST. On the whole, it's a good (not great) transmission. The tuning on it really is excellent, though. As many have said here, it's quick. And noticeably so. 

 

I have 15K on mine in 2 years. I've really only had the harsh 1-2 or 2-1 clunk shifts on this thing maybe 3-4 times. And I've never had the TSB fluid change done on mine, either. 

Posted
On 3/11/2021 at 12:34 AM, spizike9 said:

Someone correct me if I’m wrong but the ‘20 has the 10 speed right? The ‘19 has the 8 speed with the 5.3 but I don’t think the ‘20 does. 

that is correct i have the 2020 sierra slt and it has the 10 speed

Posted
6 hours ago, econometrics said:

Same here. Whenever I fire mine up, back right out of the driveway and head off, I get a bit of a funky slip in shift from 1-2 about a half block away from home. 

 

2019 5.3L / 8spd in my RST. On the whole, it's a good (not great) transmission. The tuning on it really is excellent, though. As many have said here, it's quick. And noticeably so. 

 

I have 15K on mine in 2 years. I've really only had the harsh 1-2 or 2-1 clunk shifts on this thing maybe 3-4 times. And I've never had the TSB fluid change done on mine, either. 


I had the TSB fluid change done at around 2k miles and asked them to reprogram or reboot it. I know they did it because everything in the computer was reset. It still did the jerkiness. Sometimes if I forget and jump in and shift it to D, the transmission moves too slowly from 1 to 2 and seems to just sit in the middle of the two, causes the rear tires to squeal once it latches on the 2nd gear. Only on cold mornings though, out of habit, I now remote start it a few seconds before getting in. It's a regular occurrence for me.. and I now have around 5k miles on it. Nobody wants to drive it anymore. Mine was built in April 2019 so I assume it's the earlier version. I know it's a lot better now though, even with the 8-speeds. Once it warms up, it's great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,922
    Total Members
    8,960
    Most Online
    Sdid
    Newest Member
    Sdid
    Joined
  • Who's Online   7 Members, 0 Anonymous, 1,489 Guests (See full list)


  • Latest Articles

  • Posts

    • Of course refrain from political debate but I myself have very dismal hope for what is all going on up here every where we turn so I nodded my head when I saw this joke.     
    • I'm looking at carpal tunnel surgery on my left hand and lumbar fusion. 
    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...