Jump to content

VIN # released

crf450r
 Share

Recommended Posts

crf450r Enthusiast

crf450r

Posted
Posted

I am new the forum,  Just ordered a 2021 2500hd,  it has been 18 years since I have ordered a vehicle, I am aware of the delays, but I wanted to know when the VIN# is provided during the process?  I want to put a topper on, and the lead time for that is 4-6 weeks.

 

Thanks

T.O. Enthusiast

T.O.

Posted
Posted

My dealer was able to get my VIN number immediately after it's production week. I am almost certain it hadn't even left the plant on the railcar yet and he had mine. There is a thread on here describing the process with all the 4 digit numbers, but I am not sure what number is associated with the VIN.  

newdude Senior Enthusiast

newdude

Posted
Posted

You won't get a VIN until 3800.

 

Quote

 

• 500, this is a dealer stock order code used to order common vehicles. Please contact your dealer to receive an actual active order number.
• 1100, Preliminary order accepted (This means your dealer has entered your order into their system but does not mean they have the allocation to submit the order to GM yet. Speak with your dealer to verify when they expect to be able to submit your order for production)
• 2000, Order accepted by GM (This means the order has been submitted and accepted by production. You are now on your way.)
• 2030, Order re-edited (if necessary) (This is simply an edit code showing that something on your order has been changed. It does not mean your order has been accepted to production and really does not mean anything beyond your previous status other than a change has been made.)
• 2051, Order changed thru Web (same as above)
• 2500, Order preferenced (This means that the Order has been moved to the stage that parts department is now ready to place the orders for the components that will become your car)
• 3000, Order accepted by production control (This is the response from production to your 2500 status and is when Parts are actually ordered. No further changes can be made to your order once you reach this point.)
• 3100, Order available to sequence (This is more or less an inter-office memo from Parts to Production saying all parts are committed to this build, they are clear to sequence them for the build.)
• 3300, Order scheduled for production (This is the response to the 3100 status where Production is cleared to sequence and schedule the build) TPW usually avaiable
• 3400, Order broadcast (This is when the order is actually loaded onto the production line computers and parts are being staged for the build)
• 3800, Order produced (The vehicle is completed and has rolled off the line. A Vin is now available.)
• 4000, Available to ship (Vehicle is off the line and available to ship)
• 4104, Bailment Invoice (Shipping documents generated)
• 4200, Shipped (Vehicle has been moved by a carrier to another location or destination. If in combination with a 4300 status code then this is transfer to either a vendor for upfitting or to a distribution yard for final transportation.)
• 4300, Intermediate Delivery (In combination with a 4200 this is saying that the vehicle has been transported to a vendor or to a distribution center.)
• 4B00, Bayed (listed anytime a vehicle is sitting parked waiting for next mode of transportation. It can also be this status while in Quality Control)
• 4800 Rail Ramp Unload, end of the line by (if) rail. To be delivered by truck to dealer
• 5000, Delivered to the dealer
• 6000, Delivered to the customer
• 9000, Order Cancelled

 

 

  • Like 2
nards444 Senior Enthusiast

nards444

Posted
Posted

yeah have to know where you are at in the process.  3800 is when you get a vin and for the most part truck should be done.  With that said to get to 3800 for some takes weeks or months.  Once you get to 3800 you can figure about a month to get the truck.

Another JR Senior Enthusiast

Another JR

Posted
Posted (edited)

I was at 3800 with a VIN on 3/8.  My dealer just gave me an ETA of 4/26.  I think the fact that they now have an ETA means it finally actually went to the outgoing shipper after a couple of weeks of moving around Flint.  

Edited by Another JR
TheeSpaniard3500hd Enthusiast

TheeSpaniard3500hd

Posted
Posted

My truck has an eta of 4/28 per the train shipping data page. Truck arrived in Portland on the way to Seattle area on Sunday. It doesn’t seem like it should take a month to delivery when it’s that close. Hoping it arrives sooner. Dealer has been sending almost daily updates of transit progress which I appreciate.


Sent from my iPhone using Tapatalk

Z45 Senior Enthusiast

Z45

Posted
Posted (edited)
6 hours ago, TheeSpaniard3500hd said:

My truck has an eta of 4/28 per the train shipping data page. Truck arrived in Portland on the way to Seattle area on Sunday. It doesn’t seem like it should take a month to delivery when it’s that close. Hoping it arrives sooner. Dealer has been sending almost daily updates of transit progress which I appreciate.


Sent from my iPhone using Tapatalk

Shipping companies are experiencing unprecedented demand,  transit delays and personnel shortages..  I been waiting for weeks to get a replacement door panel for my 16ft garage door and the local installer said its been taking months to get parts that used to take a week at most.    

Some things are just not important in the grand scheme of things and there is no priority to move them. That's just the way it is with the current state of affairs.  Vehicle movements are not high priority.

Edited by elcamino
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Cold start Miss, oil in cylinder

      By asilverblazer · Posted

      Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • garagerog
      Navigating senior years.

      By garagerog · Posted

      This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • GMCustomerService
      July 2026 upgrade push issues

      By GMCustomerService · Posted

      We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
    • GMCustomerService
      Multigate electrical problem

      By GMCustomerService · Posted

      We understand your frustrations with being unable to open your Sierra’s top inner tailgate, @smitty81503. Your concerns are frustrating, and we would like the opportunity to explore the best path of assistance to pursue their resolutions. There are many different factors that could be the root cause of vehicle concerns, and we handle each one on a case-by-case basis. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...