Jump to content

Recommended Posts

Posted

Hit a bump in my search for a new truck, so thought I'd hop on here and get some insight from you all.  Started looking at 2022's.  First truck I came across that I liked was the 22 Trail Boss Custom 1500 with the 6.2.  Love the truck and fits all my needs/wants.  But then while there a 2500 Custom was being unloaded with the 6.6 gas engine and was actually stickered at $3500 less than the 1500.  Again, truck fits all my needs, with the benefit of the standard bed over the short bed, sits a littler higher, etc.  I don't drive much (currently 45k on my 5 year old truck), so fuel mileage isn't something I really worry about.  My question is, why should I not get the 2500?  Do I "need" a 2500, no, but I guess when I think of what it offers me over the 1500, no issues in regards to towing, bigger bed, similar gas mileage, is it smarter to just go with the 2500.  Would think resale the 2500 does better, and also I wanted to know what people thought of the 6.6 with the 6 speed tran, over the 6.2 with the 10 speed......Any insight is greatly appreciated.  

  • Like 1
Posted

You haven't said what your needs/wants are, but somehow a lifted 1500 custom and a 2500 6.6L both fit them.

 

Be sure you compare all the features on each.

Both those included on the trim level and the optional ones on the particular truck.  Options can make a significant difference in the bottom line msrp.

 

 

If your intending to keep it for at least 5 years, and if your not in a rush, check out the info on the 'refreshed' 2022 1500's that have been revealed and will be available in the spring.

(the one you are looking at is a 2022 1500 LTD -- which is the same truck as the 2021.)

The 2500's will get the refresh, but not at the same time as the 1500's. 

 

6.2 requires premium fuel, 6.6 does not.

1500 will get better mileage. 

( I realize you said fuel economy/costs aren't a big deal to you)  

 

Trailboss has the 2" factory lift -- and it's still not as tall as a stock 2500.

If you don't want a tall truck, maybe a 1500 Custom (non Trailboss) is  consideration -- but that would mean no 6.2L and no 10 speed, as the 1500 Custom would have the 2.7L Turbo engine with the 8 speed.

 

 

I've gotten to where I find the extra height to be an annoyance rather than a benefit.

 

 

  • Like 1
Posted

Resale would be better for a 2500. When you eventually do tow, youll be glad you have a 2500. I mean seriously why buy less truck when you can have more? And everyone buys a half ton so i wouldnt even bother, half ton sales suck. 

 

Super easy decision. pick the 2500. 

  • Like 2
Posted

Most of my trucks were for work. So I bought what was required to do the job. I couldn’t wait to only need a half ton. 

  • Like 1
Posted

Check the options on the HD. My custom came with plow prep package which is heavy torsion bars, skid plate, alternator upgrade and the hidden pigtail for a strobe in the break light spoiler. Also came with tow package and bed liner. Most customs I've seen have those options, if not all of them. Still get the folding mirrors and back up/line up cameras. The 6.2 and 6.6 are essentially the same engine, so they have suffered similar bulletins with the valve train. The 6.2 uses higher compression pistons reducing displacement. The 6.6 has a beefed up iron block for durability under load. The 6.6 won't be able to be tuned like a Camero, but it's no slouch. The programming is set up to provide power under load. The shifting of the beefed up 6 speed is smooth and it holds gear up grades nicely, rather than down shifting and launching you when you crest the hill. Mileage can suck if you're messing around. But when taking it easy it's not so bad considering the truck is a good ton heavier than the 1500. 

 

 

  • Like 1
Posted (edited)

The 6.6 doesn't have lifter eating, thin oil requiring, headache inducing and barely does anything to MPG-uh-ing, dynamic fuel management. Not to mention it doesn't have annoying stop/start. Plus the 6L90E while not the latest fancy 10-speed, is as bulletproof as you can get with a factory trans.

 

I.E. the gasser 2500 HD wins in the long-term reliability category. Also, as previously mentioned, HD trucks are preferred come resale time as people do the math like you are and realize the half ton isn't worth the hit in capability.

 

Back 5 years ago when you could get $10,000 off any half ton, any time of the year at any brand/dealer, the half ton was a good deal. Mid grade half tons like a 1500 Crew 4x4 LT are good $35-37k trucks brand new.

 

At $44k-50k+? Please......

Edited by Epsilon Plus
  • 2 weeks later...
Posted

A reason against the 2500 would be ride quality.  I can only speak for single cab , long bed trucks, but I did road test both back to back.  The ride quality was a difference of night and day between a 1500 and a 2500 - with the 2500 being VERY abrasive at times.

 

Just some food for thought based on my experiences.  

Posted

Thanks for all the replies!  It was a tough choice....but after WAY too much research/reading/test driving....I pulled the trigger on a 2022 2500 Custom.  Ride is definitely a little stiffer, and feels a little more like a "work truck", but at the end of the day I just like the look of the 2500 better and it fits what I need it for.  Hoping for a solid 10 years!

  • Like 4
Posted

The ride will likely get better. Any harshness for me anyway, was much better than having to much cushion or sway when you don't want it. The 2500 rides in rails comparatively.

Posted

agreed......i dont want a truck to ride like a car....when i need its capabilties i have it available.....

  • 1 month later...
  • 2 weeks later...
Posted (edited)

I agree I think you made the right choice. I don't daily drive my truck and haven't for a long time because I either had a work vehicle or vehicle allowance. So I only put about 6k miles a year on my trucks. I've wanted a HD truck as long as 6-7 years ago and kept talking myself out of it. I could have saved myself a lot of money if I would have bought one 6 years ago because I kept trying to find a 1/2 ton that would make me happy but kept being disapointed and trying something else. Finally got to the point where we needed the HD platform. I was shocked how nice my truck rides for being a 1 ton. And as others have said when you do need to tow there is no comparison. 

Edited by finn5033
  • Like 1
  • 3 weeks later...
Posted
On 11/17/2021 at 3:16 PM, Epsilon Plus said:

The 6.6 doesn't have lifter eating, thin oil requiring, headache inducing and barely does anything to MPG-uh-ing, dynamic fuel management. Not to mention it doesn't have annoying stop/start. Plus the 6L90E while not the latest fancy 10-speed, is as bulletproof as you can get with a factory trans.

 

I.E. the gasser 2500 HD wins in the long-term reliability category. Also, as previously mentioned, HD trucks are preferred come resale time as people do the math like you are and realize the half ton isn't worth the hit in capability.

 

Back 5 years ago when you could get $10,000 off any half ton, any time of the year at any brand/dealer, the half ton was a good deal. Mid grade half tons like a 1500 Crew 4x4 LT are good $35-37k trucks brand new.

 

At $44k-50k+? Please......

Exactly. We have a '21 Silverado LT with the 5.3 and had our lifters fail at 585 miles, among other issues. I kick myself every day for not getting a Custom 2500 with the gas 6.6 for basically the same price as I'm sure it would have been a much better ownership experience. I've had nine service appointments in 14 months, and it spent nearly two of those months at the dealer service department, leaving me to drive four different rental cars. We're going to replace the truck within the next year or two, most likely with a Ford F250 with the 6.2 or 7.3 gas V8. Reliability has become priority #1 over all else because of this truck-shaped object with a Silverado badge on it.

 

I still can't believe how little quality you get for so much money in today's market and it has made me hate that we need a truck. If your sedan or crossover has to be in the shop for a week or two, you'll probably be able to get a loaner or rental that will serve the purpose and life goes on. If your truck goes down, the chances of getting a loaner/rental with a brake controller and adequate towing/payload capacity are slim to zero. You basically need to own two trucks in order to always have one that works.

On 12/2/2021 at 11:55 AM, CFRED70 said:

Thanks for all the replies!  It was a tough choice....but after WAY too much research/reading/test driving....I pulled the trigger on a 2022 2500 Custom.  Ride is definitely a little stiffer, and feels a little more like a "work truck", but at the end of the day I just like the look of the 2500 better and it fits what I need it for.  Hoping for a solid 10 years!

Good call. Try experimenting with tire pressures to soften up the ride; you shouldn't have to run the rear tires at the full 80 PSI when not towing/hauling.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I would have to read back to get a better picture in my mind of some of the other comments and what they were using for a driving scenario they based the fuel mileage off of. That is why the fuel mileage conversation is extremely difficult to make fair comparisons from. If I was to be living in town and only driving around town, light to light and some longer stretches that doesn't have a light every block, and the usual stop at a grocery store and the bank and so on and so forth, my fuel mileage even during the summer time would be so bad with my truck I don't even want to know how bad it would be !. Then add in winter time and idling to warm it up to clear the windows and driving through snowy streets etc, large heavy trucks with gas engines have NEVER been worth crap for fuel mileage and why some little pot licker of a car with wheelbarrow tires and a 1300 cc four cylinder non turbo engine was the ticket to using a mere fraction of the fuel over a full size pickup.    By the way my truck has the 34" tires as its a HC but not the BFG KO3 tires ( that was an option for my truck but the sales guy couldn't figure out what the tires actually were so that never got on the order until it was too late to change the truck order ). So what fuel mileage your getting actually sounds good for "town driving" and with my truck when I go to town the fuel mileage keeps increasing as I get closer to town because it takes quite a while to get the driveline oils warmed up ( and why it always shows better fuel mileage on the return trip from town because its already warmed up ) but once I am in town that fuel mileage average just keeps dropping the more I mess around town and then has to recover back to something reasonable again by the time I get home for an over all average.    I'd be curious what your sticker says for the factory weight of your truck, mine is close around that 7700 lb due to the options it has. But anyway the long and short is, vehicle weight, higher rolling resistance heavy tires and a hefty driveline and a relatively large gas engine make for crap fuel mileage in stop and go scenarios, all one can do is drive it easy off the line at each stop and as my dad had said over the years, drive like a raw egg is under your foot and that's the best one can do. Years back with a carbed engine and if the carb was getting a bit out of tune etc as would the ignition system, the fuel mileage on pickups with larger engines was just awful compared to what your getting. We pay the fuel price penalty for driving HD trucks over some little vehicle, that is the reality. 
    • We had two Toyota’s with that engine in the mid 80s. We had 50 gallon fuel tanks, a toolbox full of tools, an air compressor and assorted parts for our equipment. We beat those up and down pipeline ROWs until we started buying diesel trucks. Then they became parts runners and first vehicles for our teenagers first cars. Our shop Forman wrecked them both two years apart when we hired him out of high school as an apprentice. Good thing he’s an excellent mechanic. It took awhile before he could be called a good driver.
    • I have a 2025 GMC Canyon Denali.   On a trip recently the engine failed.  The dealership diagnosed a bent valve and says there is a service bulletin that indicates to 'relace the engine'.  The truck only has about 14K miles and is under warranty.   The failure occurred 5/11/2026.   So far I have worked with GM Customer Assistance and Roadside Assistance.  Evidently no engines are available and nobody will offer a date when a new one will be.   Coming up on two months with no repair or timeline and no loaner from the dealership.   GMC Customer Assistance is 'ghosting' me and keeps closing the cases I've opened with no resolution.   Hoping someone can help me on how to escalate this issue.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...