Jump to content

DIY sliding window leak permanent repair

Leevon
 Share

Recommended Posts

Leevon Enthusiast

Leevon

Posted
Posted

This is my 2nd Trail Boss with a leaking slider, both of them I bought new.  The first one I fixed myself by replacing the slider with a solid window (details are somewhere in the massive leak thread).  The second one I wanted to keep the slider and permanently seal before it ever leaked.  I've had the truck over a year and finally got around to it.  Since I was dropping the headliner I also added the camera rearview mirror and hard-wired my radar detector.  

 

I dropped the headliner and removed the spoiler.  I cleaned the top of the window channel with all purpose cleaner and a detail brush and dried it.  I taped the top of the glass and back of the cab with some little tape ball dams at the ends.  I warmed the area up with a heat gun so it would flow then I applied self-leveling sealer SEM 39387 then I hit it with the gun a little more to draw out air bubbles.   After that cured, I put 3m strip caulk on all of the spoiler bolts and nuts and re-installed the spoiler.   The self-leveling sealer had the exact effect I wanted, it bridged from the glass to the body and covered up the plastic slider frame that cracks and leaks.  There were no cracks in the frame this time.  I also noticed they are putting a little sealer on the nuts that hold the spoiler on, but it's not adequate.  The way I did this it should never leak from the glass or the spoiler holes.  

 

The mirror upgrade was easy, swap the brake light, add the cable and swap the mirror.  Plug-and-play.  

 

 

 

 

 

 

 

thumbnail_IMG_8809.jpg

thumbnail_IMG_8810.jpg

thumbnail_IMG_8815.jpg

thumbnail_IMG_8819.jpg

thumbnail_IMG_8823.jpg

thumbnail_IMG_8824.jpg

thumbnail_IMG_8825.jpg

thumbnail_IMG_8832.jpg

thumbnail_IMG_8852.jpg

thumbnail_IMG_8835.jpg

thumbnail_IMG_8837.jpg

thumbnail_IMG_8838.jpg

thumbnail_IMG_8841.jpg

thumbnail_IMG_8842.jpg

  • Like 5
  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Leevon
Leevon

This is my 2nd Trail Boss with a leaking slider, both of them I bought new.  The first one I fixed myself by replacing the slider with a solid window (details are somewhere in the massive leak thread)

GN2018
GN2018

I’m so thankful to Leevon for posting this.  My original plan if I got a leak was to get the solid window.  Now I’m thinking I’ll find someone to do the repair properly as shown in this thread.  And,

Josh_166
Josh_166

Just did this myself. I tried sealing around the spoiler first and it definitely slowed it down, but there was still a slight leak. Not a soaked headliner like it was before the fix but enough I didn'

Posted Images

rbdjr Enthusiast

rbdjr

Posted
Posted

I have my fingers crossed, 2021 RST 4x4 crew, slider no leak yet? all good, manufactured 6/21

fatwhiteboy Enthusiast

fatwhiteboy

Posted
Posted

Thank you for the detailed description and pics.  That headliner looks like a real pain in the backside to drop.

  • Like 1
smit303 Enthusiast

smit303

Posted
Posted

Nice job. Still can't believe we have to do this stuff to make it right. My 19 Denali leaked shortly after I got it. The dealer did the repair It it hasn't leaked since. I just ordered a 22 Denali. Hopefully, they have fixed the issue. 

  • Like 1
  • txab pinned this topic
newdude Senior Enthusiast

newdude

Posted
Posted
On 1/15/2022 at 5:22 PM, Leevon said:

 I also noticed they are putting a little sealer on the nuts that hold the spoiler on, but it's not adequate.  The way I did this it should never leak from the glass or the spoiler holes.  

 

The mirror upgrade was easy, swap the brake light, add the cable and swap the mirror.  Plug-and-play.  

 

 

 

 

I hope you got new nuts before you put it all back together.

 

Quote

 

18-NA-383: Water Found in Rear Interior of Cab, Water Leak at Rear Sliding Window - (Oct 23, 2020)

 

Important: The 8 central roof spoiler nuts are NOT reusable fasteners. The original fasteners must be discarded and replaced.

  1. Allow a short time for the sealer to develop a skim coat, then reinstall the spoiler and headliner. Refer to Roof Rear Spoiler Replacement, in SI.
  2. Allow at least 24 hours before running the truck through any car wash.

 

  • Like 1
Leevon Enthusiast

Leevon

Posted
  • Author
Posted
On 1/16/2022 at 1:06 PM, fatwhiteboy said:

Thank you for the detailed description and pics.  That headliner looks like a real pain in the backside to drop.

 

You know what it's not too bad, I probably had it dropped in about 30 minutes.  It re-installs in 10 minutes.   It is the second time I have done it so that was a huge help.  And there is a video from infotainment.com that is outstanding I used as a refresher.  I promise something WILL break though, you just have to accept that, there are too many plastic pieces being touched.  I'd rather be the one doing the breaking though.  The "A" clips that hold plastic trim on are always terrible.  For me this time it was one of the clips that secure the headliner around sunroof.  No biggie.  

Leevon Enthusiast

Leevon

Posted
  • Author
Posted (edited)
20 hours ago, newdude said:

 

 

I hope you got new nuts before you put it all back together.

 

 

NO, unnecessary. The bulletin is BS.  The reason why they want that is because the updated nuts come with a "teflon-ish" type thin seal (see the white stuff in my photo).  The seal is completely ineffective.  First off it's on the inside of the cab and second they don't make an adequate seal.  Third they're $37 for new nuts lol.  If the engineers had their heads screwed on they would be recommending something like what I did.  I wrapped each spoiler bolt (8) in 3m strip caulk at the base and each of the spoiler nuts (4) on their flange.  When the spoiler is installed this sandwiches the strip caulk through the holes, creating a permanent seal 100x better than the factory.   Another fault with the design is that there are supposed to be thin seals on the spoiler side of the holes on the posts.  I found (1) total on my first truck and (2) on the second.  There should be 8, they simply don't get installed at the factory.  I take them off before installing the strip caulk.  

 

IMG_2835.jpg

thumbnail_IMG_8842.jpg

 

thumbnail_IMG_8841.jpg

IMG_2729.jpg

Edited by Leevon
Leevon Enthusiast

Leevon

Posted
  • Author
Posted

Since this is now a sticky, I hope the mods don't mind me posting the video you can use to get comfortable dropping the headliner.  It's from a vendor that sells the camera mirror upgrade as a kit, I have no affiliation with them but I think the video is a great help.  

 

 

  • Like 1
Leevon Enthusiast

Leevon

Posted
  • Author
Posted

Also, here is what you're trying to fix, small cracks in the plastic slider frame that allow water to pass through:  

IMG_2724.thumb.jpg.66bf801921a392a993cfb550578b5eea.jpg

dgoins816 Enthusiast

dgoins816

Posted
Posted

Very cool and detailed account of how to remedy.  My 19 had this issue as well - of course it cropped up right when we were getting very heavy rain here in Indiana.

Mad Max Enthusiast

Mad Max

Posted
Posted
On 1/17/2022 at 12:40 PM, smit303 said:

Nice job. Still can't believe we have to do this stuff to make it right. My 19 Denali leaked shortly after I got it. The dealer did the repair It it hasn't leaked since. I just ordered a 22 Denali. Hopefully, they have fixed the issue. 

I just purchased a new 2022 Denali Limited and was checking out this thread for insights should I have a leak. Is it just me because I can’t find a forum for my 2022 truck here? Did you get a 2022 limited?

smit303 Enthusiast

smit303

Posted
Posted

No. I ordered a refreshed Denali with the Reserve package. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   3 Members, 0 Anonymous, 2,142 Guests (See full list)

  • Latest Articles

  • Posts

    • B14Sierra
      Cam chain tensioner question

      By B14Sierra · Posted

      So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • dna9656
      No low range 4 x 4

      By dna9656 · Posted

      My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...