Jump to content

Recommended Posts

Posted
22 minutes ago, diyer2 said:

So changing the fluid more frequently in a 6L80E will help?

 

Most certainly wont hurt.

 

Most people do a pan exchange every 10/20k miles.

 

I took a sample, sent it in to Blackstone. Result came back pretty decent so I do a 5 to 6 quarts pan fluid exchange every 10k.

Posted (edited)
On 3/7/2022 at 11:02 PM, 2015 High Miler said:

I'm on my second GM transmission.  The first one died at 122,000 and the second has died at 225,000.

 

Did you ever "flip the pill"?  The thermostat kills these things, it's too high.  GM has recently released a lower temp unit or you can "flip the pill".

 

From now on run the severe service schedule, changing the fluid every 40K miles give or take.

Edited by swathdiver
Posted

I did not flip the pill as I was not aware of this until about a year ago and it already had 80,000 miles on the new one.  


This one will have a bypass if its not done once I get it back. 

  • Like 1
Posted

Just curious as to how often the fluid was changed?  Since GM came out with their lower temp thermostat, it pretty much indicates that the running temperature was/is the problem and anyone with one of these transmissions would benefit to install it or flip the pill.

 

I just towed a 3klb boat 2.5 hours down the interstate and some country roads with my 2019 and the 10sp and the transmission never got above 150°F.

 

Like stated above, GM has changed the fluid chemistry to try and fix issues.  A high quality synthetic can make a difference.  I believe my 4L60 in my 2002 held up so well in over 200k miles is because I switched it out to AMSOIL within 5k miles of owning it from new.  It seen a ton of towing and hauling in those miles.

  • Like 1
Posted
On 3/8/2022 at 11:13 PM, 2015 High Miler said:

I was fortunate. It was a goodwill gesture from the dealer to get it covered. 
 

 

Glad to hear some dealerships out there still do this type of stuff

 

how is the repair going?

 

i just bought a 2992 LTD LTZ with the 5.3 engine, I plan on keeping it for the next 6-7 years and hope the engine and trans  will last me that long. I come from the ford F-150 family who has disappointed me but that’s another story.

Posted
14 hours ago, Black02Silverado said:

Just curious as to how often the fluid was changed?  Since GM came out with their lower temp thermostat, it pretty much indicates that the running temperature was/is the problem and anyone with one of these transmissions would benefit to install it or flip the pill.

 

I just towed a 3klb boat 2.5 hours down the interstate and some country roads with my 2019 and the 10sp and the transmission never got above 150°F.

 

Like stated above, GM has changed the fluid chemistry to try and fix issues.  A high quality synthetic can make a difference.  I believe my 4L60 in my 2002 held up so well in over 200k miles is because I switched it out to AMSOIL within 5k miles of owning it from new.  It seen a ton of towing and hauling in those miles.

I changed it twice in the 100,000 miles since it was swapped. I used AMSOIL on both.  On Monday when I noticed the issue, I checked the fluid. While not bright red like new, it was not burnt smelling like the last one was.  

  • Thanks 1
Posted
11 hours ago, Nestor Romero said:

Glad to hear some dealerships out there still do this type of stuff

 

how is the repair going?

 

i just bought a 2992 LTD LTZ with the 5.3 engine, I plan on keeping it for the next 6-7 years and hope the engine and trans  will last me that long. I come from the ford F-150 family who has disappointed me but that’s another story.

I hope to get it back tomorrow or Saturday. It will have quite a few updates and hopefully the last trans repair for quite sometime.    

  • Like 1
Posted (edited)

Trans feels good so far.   The list of issues echos many of the things I’ve read here.  Mostly seem heat related. New setup has not got to 115 yet that I have seen.  Drove it back from the shop over 130 miles, and it never hit 100 but it was 40 out.  
 

Builder said it’s built to handle 700 HP.  More if it had a hardened input shaft.  Hoping I never have to have it out again….

DCE70F46-4978-4CAA-B637-E532B965EBA3.jpeg

Edited by 2015 High Miler
  • Like 1
Posted
1 minute ago, 2015 High Miler said:

Trans feels good so far.   The list of issues echos many of the things I’ve read here.  Mostly seem heat related. New setup has not got to 115 yet that I have seen.  Drove it back from the shop and it never hit 100 but it was 40 out.  
 

Builder said it’s built to handle 700 HP.  More if it had a hardened input shaft.  Hoping I never have to have it out again….

DCE70F46-4978-4CAA-B637-E532B965EBA3.jpeg

What's the name of the shop and how much? I may need one for future reference.

Posted
22 minutes ago, Snowcamo said:

What's the name of the shop and how much? I may need one for future reference.

McCoys in Garland. $4200 out the door and replaced the rear main that was leaking as well.  I never noticed it but was told by a couple of techs that it was leaking.  Took 4 days.  Very satisfied at this point. 

  • Like 1
  • Thanks 1
Posted
1 minute ago, 2015 High Miler said:

McCoys in Garland. $4200 out the door and replaced the rear main that was leaking as well.  I never noticed it but was told by a couple of techs that it was leaking.  Took 4 days.  Very satisfied at this point. 

Thanks! Sounds like a very good deal. Does it shift better then stock so far?

Posted
9 minutes ago, Snowcamo said:

Thanks! Sounds like a very good deal. Does it shift better then stock so far?

For the tune that’s on the truck now, it was no different. Crispier but not really harder.   Tune was already pretty good on the shifts.  He warned me that it would be considerably firmer but it’s good in my opinion.   

  • Like 2
  • 5 weeks later...
Posted

small update.  New trans is doing well.  I did get an updated tune to reflect the new components and its still working well.  The temps are where I would expect with the cooler and the bypass.  Highest I've seen is 140 in heavy city traffic.  

 

I do need to get a better tune though, both engine and trans.  I have HP Tuners but I'm not very good at it yet.  

 

If anyone is in the DFW area that has some experience, Id be happy to meet up and get a look at my tune.  

Posted (edited)

You can post the tune here, I can look at it.

 

What don't you like about the current tune on it?

Edited by CamGTP
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined
  • Who's Online   1 Member, 0 Anonymous, 505 Guests (See full list)


  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...