Jump to content

Is your GMT-900 using oil  

1,555 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Posted

no 100% sure what block i have. 90,000 on the clock 5.3 flex fuel. i use whatever fully synthetic oil autozone is running a special on that week. change it about every 5 to 6 thousand miles. usually she's about a quart low at the 5k mark. its been like that since the first time i changed the oil. i bought the truck new and about 90% of the miles are interstate commute to work miles so it has not been abused.

Posted

Well its almost time for another oil change. Will be hittin 75k soon. I still can't get a good answer out of anyone as to whats happening to the oil? Since I bought the truck used, I have put 9 qts. of extra oil in 25k. Seems the truck is lagging a little in power now. Does the dealer have a way to check for diminished exhaust flow? I have always been told clogged cats will burn the valves.

Posted

So will disabling the AFM void the warranty with GM?

 

I have a 2009 Chevrolet Z71 with the 5.3 and AFM.

Posted

I have a 2007 Chevy Tahoe with 91k and never really noticed that burned that much oil. But this one week I put 1200 miles on it all highway and low oil light\message came up. Since then I had the oil change and started an oil comp. test. 3000 1qt is gone. So if I disable AFM will my issue go away or is the damage already done? Love the truck just not this oil deal. I talk to my dealer and they said they are only see this in higher mileage 07 that are highway driven. Thoughts?

Posted
I have a 2007 Chevy Tahoe with 91k and never really noticed that burned that much oil. But this one week I put 1200 miles on it all highway and low oil light\message came up. Since then I had the oil change and started an oil comp. test. 3000 1qt is gone. So if I disable AFM will my issue go away or is the damage already done? Love the truck just not this oil deal. I talk to my dealer and they said they are only see this in higher mileage 07 that are highway driven. Thoughts?

 

So is the AFM the root cause of all of the oil burning/loss woes???

 

I had 2 previous 5.3 both NON-AFM engines, what the heck changed??????

Posted

After a long talk they have agreed to replace the engine. My last truck was an 02 silver ado with 250k that maybe burnt a half quart at 5000 miles acceptable.they also didn't want to admit the reason booth catalytic converters and 02 sensors were from the oil burning needless to say there getting replaced too. Thanks

 

 

Wow... kinda hope I dont end up there... or if I do, its in the next 6 months before my powertrain warr runs out :nonod:

Posted
After a long talk they have agreed to replace the engine. My last truck was an 02 silver ado with 250k that maybe burnt a half quart at 5000 miles acceptable.they also didn't want to admit the reason booth catalytic converters and 02 sensors were from the oil burning needless to say there getting replaced too. Thanks
Wow... kinda hope I dont end up there... or if I do, its in the next 6 months before my powertrain warr runs out :nonod:

 

 

I had an 2003 with 225,000 miles and never had any engine problems, my 2009 is 1/2 the truck in build quaility.

 

I am going to find a clean late model 2000-2006 model and ditch the 2009.

  • Like 1
  • 2 weeks later...
Posted

Glad i found t his forum.....So i crank up the truck a few days ago and i see a huge puff of white smoke...never seen b4, then while driving i hear the clatter sound. Get home and sure enough, very little oil on dipstick! No warning what so ever on the display, and the dic showed 35% in the oil change deal. So i added 3 qts.

Have 102,000 miles, 2008 5.3L AFM, driving about 70 miles Daily.

 

Does anyone know what the oil pressure should be reading???

Posted

 

Does anyone know what the oil pressure should be reading???

 

 

I myself have wondered what the oil pressure should be reading as mine jumps around. I seem to have to put anywhere from .5-1. qt. of oil in my 07 at about 30% left on the DIC.

Posted

Glad i found t his forum.....So i crank up the truck a few days ago and i see a huge puff of white smoke...never seen b4, then while driving i hear the clatter sound. Get home and sure enough, very little oil on dipstick! No warning what so ever on the display, and the dic showed 35% in the oil change deal. So i added 3 qts.

Have 102,000 miles, 2008 5.3L AFM, driving about 70 miles Daily.

 

Does anyone know what the oil pressure should be reading???

 

 

Mine is around 40 at idle, 50 at steady speed, and 60 while accelerating.

Posted

Great Forum Guys,

 

So I have a 2008 Chevy Suburban Z71 with the 5.3 in it..~ 49,500 Miles on it..

 

Owned since new.. Syntethic oil at every change ~ 5000 miles as recommended..

 

Just before going on a weekend Ski trip I checked my oil level and I was 1.5 qts low..

 

So I topped it off and went on our Ski trip ~ 600 Miles later I checked the oil level and I was .5 qts low...

 

At that rate I am at the 2 qts or better every 2400 miles..That is un believable to me..

 

I have also noticed during cold starts especially when sitting for a few days that I hear what

sounds like lifter tick and or piston slap during warm up.. 2 min or more..

 

Oddly enough my neighbors 2008 Yukon XL is in the shop getting piston & rings replaced she has 60k on hers.

 

I have a couple of questions for our dear forum members..

 

1) Why is there not a complete recall on this Issue based on the number of cases?

2) Has anyone checked into Class Action regarding this issue?

3) How About E.P.A study / Polution probability..?

4) What is this doing to my Catalytic Converters / O2 sensors?

 

My 99 Suburban @ 120K did not use a drop of oil and neither did my 93 Sierra...@ 125K

 

I am a loyal GM customer and Multi-GM car owner.. This is unacceptable.. No one has the time to stop at the dealer every 500 miles for months on end!

 

I am not a fan of Engine Surgery at 50,000 miles.. Unless my warranty is reset to 0 miles..

 

For those in the Metro Detroit area who have had this resolved, can someone respond with a dealer suggestion?

 

Thanks!

 

Cpt Ahab ;)

  • Like 1
Posted

Just finished my first "official" oil consumption test through the local dealer. They reported that my truck consumed 1.5 qts of oil over the test interval as opposed to the .5-1 qt I've measured. (In all honesty I did drive more during February than I have over the last 12 months, but it was mostly highway mileage back and forth to western Ohio.) To make a long story short the Service Manager recognized the "validity" of my concern over the oil consumption, but said his hands were tied as the amount of oil used was "acceptable" to GM.

Posted

1) Why is there not a complete recall on this Issue based on the number of cases?

2) Has anyone checked into Class Action regarding this issue?

3) How About E.P.A study / Polution probability..?

4) What is this doing to my Catalytic Converters / O2 sensors?

 

 

1) It is evident that GM doesn't intend to recall vountarily. All of us could file a compaint to the NHTSA but I think it has to be a safety issue. I searched there and found only 1 complaint about the consumption issue. All that are using oil here should file a compaint, it might do something.

http://www-odi.nhtsa.dot.gov/cars/problems/recalls/

2) Has been suggested in posts here but nothing has come of it.

3) This one may be the best option, since all this oil has to be causing pollution.

http://www.epa.gov/otaq/recall.htm

4) I've asked the same question here, and at the dealer. No answer yet.

Posted (edited)

2008 extended cab with 5.3. 71000 miles. Bought it new in May of '08. Haven't noticed that it's burning any oil and I do all my own maintenance. If it's using any oil it is very little.

 

My son is still driving a 1999 extended cab with 4.8 that I bought back in Oct. 1998. It has ~250000 miles on it. It's not using much, if any, oil either.

 

 

I use Pennzoil full synthetic.

Edited by David_L6
Posted

Hey guys I have a Sierra 4.8 only has 13000 miles on it obviously not afm, any how Its not using up any oil, but I was reading through everything and I noticed a lot of you are noticing oil consumption after like 5000 miles or about .5 of a quart around 3000 miles which should still put you in between the cross hatch (still safe) why wouldnt you guys just change your oil every 3000 miles and forget about the Olm.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.
    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...