Jump to content

Is your GMT-900 using oil  

1,555 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Posted

I change my truck every 3000 miles. I also own a 2008 Toyota Sienna and use Conventional and change it at 3000 but I'm going 100 % Synthetic with both vehicles now, 2008 Nissan Altima and I use  Mobil Synthetic  (that's what previous owners used)and change every 5000 and a 2010 Toyota Camry and I use  Valvoline Synthetic (previous owners used Havoline Synthetic) and change every 5000.

Posted

5000 miles on full synthetic with a good premium oil filter will be all you need. 

  • Thanks 1
Posted

^^^ This.

 

I rank additives with "mechanic in a can",  whiz-bang quick fixes. All 1 step below useless ... except for getting you to part with your hard-earned money.

Posted (edited)

92,005 miles   Still going Strong 

Burns NO oil  No oil consumption, No SLUDGE..

 Engine Oil stays clean  to 4,000

 

4,000 Mile Oil change interval (±50 miles)

Hybrid Vortec 6.0L LFA Aluminum Engine (LS2 based)

80HP Electric  motor 

:driving:  379HP 472 ft•lb torque combined output ?

 

she runs a custom blended  mobil1 5w30 (5qt) & Mobil1 0w30 (1qt)

 

  and a steady diet of Mobil or Chevron Fuel,  91 octane only for Maximum Performance

 

 

Piston Style Flat Top, with valve reliefs

 (for VVT duh)

 
Casting Numbers 799, 243
Material Aluminum
Edited by bg1988
  • 3 weeks later...
Posted

75k miles on my 09 Sierra, no oil burning issues to speak of. Did the valve cover swap, added an oil catch can and got a range afm disabler once I got on this forum and realized how many people were having issues. I figured this is cheap insurance just in case oil consumption did start. I did notice a big oil stain on the block underneath spark plug 1 when I changed my plugs last year, that was before I added the mods stated above. No new stains since. 

  • 1 month later...
Posted

(first post)
Just bought an 07 Silverado with 90k miles on it, gonna be keeping an eye on my dipstick, (specially when hwy driving) and figuring where to get this disabler some of you are talking about., hmmm .... ?

  • 1 month later...
Posted

I use Rotella Oil in my 2002 Silverado Ext Cab 4x4 5.3 liter with 121K.

My Dad was original Owner, He always took it to Firestone near his house.

I've had it 3 years now, It "uses" about half a quart over 5k miles.

No leaks that I can see, no Blue/white smoke on start-ups, I don't know where it goes..

Thanks,

Scott 

Posted

It burns it - they all do in varying amounts. 1 quart in 5k miles will never show any evidence, aside from the level drop at oil change time.

Posted
On 12/12/2019 at 9:50 AM, Jsdirt said:

It burns it - they all do in varying amounts. 1 quart in 5k miles will never show any evidence, aside from the level drop at oil change time.

yup, exactly

  • 2 weeks later...
Posted
On 7/7/2019 at 8:59 PM, Jsdirt said:

That's true of any engine .... but you're missing the point.

 

In their quest to meet EPA regulations (better mileage / emissions), they cut corners on the entire AFM system, and valve train. Low tension piston rings were used to get the mileage they needed ... and in exchange they completely wore out at 50k miles - sometimes less, sometimes more. 

 

I bought my truck brand new. NOBODY has owned it but me since day 1. Forty miles on the clock. It's had a steady diet of top shelf synthetics since 2k miles. Started off with Royal Purple, then switched to Amsoil Signature Series at 40k miles - can't get any better oil than that. Most I've ever run that oil was 9,600 miles. The severe service interval on that oil is 15k miles - the additive package is robust enough to handle that without a problem. I sent my sample into Blackstone Labs, and had high levels of aluminum and iron (piston and rings). Second sample I changed much sooner, and had high levels of brass and iron (camshaft bearings and camshaft). I'm only at 97k now. Started using oil at 50k miles, and oil pressure started trending downwards at around 80k (along with the cam bearing pieces in the oil analysis). When I was a teenager up to my 30's, I abused the CRAP out of my cars and trucks from the 70's & 80's - some I never changed the oil in since they burned, leaked, or did both! NEVER had any sign of engine failure. Well over 200k, some well over 300k, and others we'll never know (maybe 400k to 500k). This truck might look, ride, stop and handle better than those vehicles, but it's a complete piece of shit in comparison. I won't even see 150k before I'll have to put an engine in this thing. Has NOTHING to do with maintenance - it's GM's quest to make money with a failing company.

Im not doubting but I would like links to info on this stuff, and maybe some How-to's or at least what-to as far as the final say on the AFM thing. im at 55k Would a disabler do the trick? I don't really wanna jump in there mechanically yet. 

  • 5 months later...
  • 7 months later...
Posted

Kinda an old post since the last reply but I’m going through this same thing. Bought the truck (2013 w the 5.3) with 117k miles July 2019. Checked the oil when I got it home and it was new and full. Then after a couple months and about 3000 miles noticed it was dripping down quite a bit on my driveway and was coming down off the filter. Filter was loose so I tightened it and checked the oil level. Not even on the end of the stick. Added 2 quarts and it got it back on the stick. Topped it off. Checked it every week or so and didn’t notice it going down much so I just figured it was leaking out due to the loose filter. When it came time to change it around 7500 miles or 20% on the oil life monitor again was a couple quarts low. Then I stopped driving much when covid hit until driving 750 miles to my parents for Christmas. One way trip it went from full to half way down the marker. Thought hmmm maybe I didn’t have it all the way full before I left.  Made SURE it was full before I left their house and checked it the day after I got home and again exactly half way down the dipstick in 750 miles. I bought a new drivers side valve cover thinking maybe mine is clogged and for $50 I’ll try it and see if it’s helps. Haven’t gotten the part in yet but it’s definitely using more than any “normal” amount of oil right now. Other than that runs perfect 

  • 4 months later...
Posted

 

Ok y'all.  You may not believe this but I assure you it's true.  I realized that all this oil loss started when I put my stock tune back on the truck to run 87 oct gas.  I also seafoamed the truck so did that, ran the fuel down to when the light came on, filled up with 93 and put the Lew Tune back on.  I drove for a week and almost a full tank of gas and the oil level has not dropped any at all that I can tell.  Before, it would be down from the top hole on the stick to almost the bottom one in just 350 miles.  It's hard to believe that just by turning off the AFM and cleaning the combustion chamber it made that much difference, but it did.  I was to the point I was going to trade in the truck but now I'm going to keep it a while.   I never did put the new valve cover on. Since my truck is a 2013 it already has the new one  

  • 2 months later...
Posted

2007 Sierra 5.3, I refill a litre too frequently at around 100km, cylinder 3 burns oil crazily and needs new plug every 400km, and I could have a pan gasket leak as I offroad and do not bother to look under.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...