Jump to content

Recommended Posts

Posted

I just installed the Volant Cold Air system in my completely stock truck. Before the best milage I could get was 14.5 to 15.5. I've had it on for 400+ miles and now get 20 to 22!!!!!!!! My driving consists of a good mix of highway and city with temps being pretty cold here in Buffalo now. I'd say it will pay for itself in no time.

 

5+ MPG from just an intake? I wish it was that easy

Posted

Then tell me what else I did to my truck?Sent from my SAMSUNG-SM-N900A using Tapatalk

Dang it man are you yanking our chain here? Lets have some details. What truck (CC etc) What engine size What gears What tire size.. HOW MUCH? how hard is it to install? Do you work for Volant or have an interest in that company?Short answer to your first question, is yes.
What do I have to gain by lieing? Sent from my SAMSUNG-SM-N900A using Tapatalk
Posted

Then tell me what else I did to my truck? Sent from my SAMSUNG-SM-N900A using Tapatalk

What do I have to gain by lieing? Sent from my SAMSUNG-SM-N900A using Tapatalk

Could be broke in more, you could be running it easy since you can hear it. Which is different from most people. In cruise mode your engine only going to ask for certain amount of air. It would be counter productive for any auto co. to restrict that much air, then spend millions to make them drop to V4. Also you can bring it in, but you still have to spit it out, headers, big exhaust. No Im not calling you a fibber but it was not just that, if it was I be buying a bunch of stock in that co.
Posted (edited)

This was my 500 miles drive home from the dealer. Very impressed

IMG_20140314_241642648_zpsqsrgefrh.jpg

IMG_20140314_241651820_zps7uqob1zu.jpg

IMG_20140314_241700236_zpsfznhdbeq.jpg

Edited by Full Lock
Posted

This was my 500 miles drive home from the dealer. Very impressed

 

Nice! What kind of speeds?

Posted

Nice! What kind of speeds?

Nice...the only way I'd get that mileage is down hill with an 80 mph tail wind and my tires inflated to 50 psi.

Posted

Nice! What kind of speeds?

Between 75 & 85 most of the time on I70. I couldn't believe it coming from a 03 sierra on 33s getting 13-14 at those speeds

Posted

This was my 500 miles drive home from the dealer. Very impressed

IMG_20140314_241642648_zpsqsrgefrh.jpg

IMG_20140314_241651820_zps7uqob1zu.jpg

IMG_20140314_241700236_zpsfznhdbeq.jpg

Wow and a 6.2 engine. Now this fella knows how to feather a gas pedal "hypermilling" You have to pay attention to what you are doing to get the really good mileage. I really think that most (maybe not all trucks some may actually have mechanical issues) are perfectly capable of achieving good mileage with the right operator.................. Just give it a serious try, set your DIC to the 25 mile range and start watching how your driving affects your mileage. You will probably discover that your driving habits are MUCH worse than you thought!!!!!!!!!!!!

Posted (edited)

Wow and a 6.2 engine. Now this fella knows how to feather a gas pedal "hypermilling" You have to pay attention to what you are doing to get the really good mileage. I really think that most (maybe not all trucks some may actually have mechanical issues) are perfectly capable of achieving good mileage with the right operator.................. Just give it a serious try, set your DIC to the 25 mile range and start watching how your driving affects your mileage. You will probably discover that your driving habits are MUCH worse than you thought!!!!!!!!!!!!

I was on cruise for about 75%-80% of the time... the other 20%-25% I was glued to the MPG haha

Funny thing is the last 50 & 25miles of my trip was all side roads and back roads

Edited by Full Lock
Posted

Dang it man are you yanking our chain here? Lets have some details. What truck (CC etc) What engine size What gears What tire size.. HOW MUCH? how hard is it to install? Do you work for Volant or have an interest in that company?

 

Can you share this article? I would be interested in seeing this.

Posted (edited)

Volant Air Filter Box: Our Cross-Link polyethylene box is engineered to each specific application for low restriction and an increase in air volume. It insulates and protects the filter from engine heat, moisture, dust and debris to provide colder air to the engine for an increase in horsepower.Volant Air Duct: Factory air inlet ducts use sound baffles and awkward bends which restrict flow. Our Cross-Link polyethylene air ducts are sculptured to give the engine less restrictive breathing. Incorporating larger diameters and unique bends, that can't be duplicated with metal ducts, allow for maximum airflow velocity and throttle response.NEW Volant Filters with PowerCore® Filtration Technology: This air filter is the most revolutionary on the market. Manufactured by Donaldson® to Volant's applications, this filter uses advanced technology for improved efficiency. This material is a high-quality synthetic, that won't deteriorate as easily as traditional paper element and cotton/gauze filter media, while also providing vastly improved filtration up to 99.97%. In addition, it's water resistant and never needs oiling. PowerCore Filtration Technology works by directing air into the front of the filter, where it is channeled into its fluted design. The channels are alternately sealed, allowing air to enter through an open flute and forcing it to exit out an adjacent flute. This allows the air to be filtered in one pass through the filter media with less restriction, allowing clean air to enter your engine for increased airflow and higher filtration efficiency. This technology allows the filter to include a 4 year or 100,000 miles warranty when used in urban conditions.Volant offers Polished Aluminum or Carbon Fiber Look lids. (Some of our older applications and low production intake kits have the carbon fiber look lid.)High Performance Silicon Connectors: Our silicone hose connectors provide flexibility while maintaining strength and thermal stability. They won't crack or deform over time like rubber connectors.Stainless Steel Clamps: We only use marine-grade, stainless steel clamps that provide optimal performance to provide a solid seal that

Edited by Ton J
Posted

I was thinking the same thing so i left my trip on for a while just to see. Pic attached

 

 

 

I brought the truck to GMC and they wouldn't look at it. They said bring it back after you get 5000 miles on it..

 

So I have to get 15mpg for a half a year before they look at it????

 

I also complained about my heater. My Dodge got hot heat in 2 minutes. This GMC takes more than 7 miles to get heat that is warm. I drive 7 miles in the morning, that's how I know. They told me to let it warm up in the morning then,, The remote allows 2 ten minute cycles.. So I said in this day and age you need to let a truck warm up for 20 minutes to get heat. How come my dodge got heat in 2 minutes. Is that another GMC design flaw? He said.. They are different trucks. LOL.. no shit one has modern engineering and a GMC threw the engineers out the window.

 

 

Well id get the heater checked on yours becuase mine warms up very quickly. I don't usually remote start mine as I am trying to see just how high I can get my MPGs so I don't run it unless I'm in the truck driving or getting ready to drive. Mine is shooting out hot air by the time I get down the street from my home (so after about a 1/2 mile. And I don't creep down the street, I go about 25-30mph

 

 

Sent from my iPhone using Tapatalk

Posted

I understand that low temps cause a loss in gas mileage. The computer in the car is adjusting fuel air mixture for the lower temps and denser air going into the system so it adds GAS to even it back out. The thing thats hard to believe is the amounts of fuel I'm hearing on this site is it is a lot more than even I could dream of being possible. I guess that G.M. really did tune these for optimum fuel mileage.

Posted

I can get about 21-22 at 78 or so. It doesn't stay there for long because on my way to work I cross like 11 bridges in 30 miles. Sucks.

Posted

I can get about 21-22 at 78 or so. It doesn't stay there for long because on my way to work I cross like 11 bridges in 30 miles. Sucks.

Yes if you really WORK at it you are going to get some good mileage I think I may be getting bored with mpg fight though. If you just ignore mpg and drive like you want to I think that might be your REAL WORLD mileage for you and your truck be it 18 or 12. Looks like I am at 15 REAL WORLD believe me I CAN get much better if I try but life is to short to fool with it Yawn I am worn out from previous mpg efforts going to take a nap now........................................

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...