Jump to content

Recommended Posts

Posted

I guess both, more so tall just to fill in the wheel well as much as I can but don't want the wheel sticking out the size much past the stock.

Posted

Would 11.00/R20s be too big?

Stock size is 31.91x10.83 so 11" wide would barely change anything

Posted

I installed my 2" RC level kit yesterday, it took me and a helper about 1.5 hours.

 

I removed the wheels (and the lower strut bolts of course) and loosened the sway bar bolts only leaving about 2 threads holding it on. Those the only bolts I touched, I didn't loosen anything else. Managed to get the blocks in place by prying, tapping with a plastic hammer, and using a tapered punch to get all three holes lined up.

 

My front wheel well height was 36 1/2" before, and now it is 38 5/8". Front is now 1/8" lower than the rear, so it worked out well.

 

Getting some 33" tires put on later this week!

Posted

My truck measures 38 1/2" at the rear and right at 38" in the front after the RC 2" level. Pretty happy with it so far. Thought of putting a 2" block in the rear to give it a little rake back.

Posted

The rear is only 38 3/4" ? The rear on my Z71 before tires is 39 1/2". It is 40" now with the 33s.

Yep, I have a dual liner in the bed, and a low profile aluminum tool box, and inside the box is probably close to 100 pounds of tools/stuff. (And a full tank of gas when I measured! lol)

 

So there is some added weight that is probably dropping my rear end a bit. It does seem like every truck sits at a different height though.

Posted

Here's my install from today.. I went w/ the 1.5in leveling kit from McGaughy's.. Overall decent parts, but you'll need new bolts!! The factory nuts will NOT work and will only go on a few threads.. Luckily, I had extra bolts from years ago in the tool box that work prefect!

 

Its 39inches in the front and 40inches in the back. Really dig the new stance! Bigger tires are up next!

 

IMG_4184_zpsd9b0a2cf.jpeg

  • Like 4
Posted (edited)

Here's my install from today.. I went w/ the 1.5in leveling kit from McGaughy's.. Overall decent parts, but you'll need new bolts!! The factory nuts will NOT work and will only go on a few threads.. Luckily, I had extra bolts from years ago in the tool box that work prefect!

 

Its 39inches in the front and 40inches in the back. Really dig the new stance! Bigger tires are up next!

 

IMG_4184_zpsd9b0a2cf.jpeg

Nice looking truck!

 

Pro Comp 2.25" Leveling Kit w/ Cooper Discoverer STT 33X12.5R20

Edited by TXSierra507
Posted (edited)

Looking for the ready lift kit that gives 2.5 in the front and like a 1-2 inch block in the back? Just to recover some rake.

Edit: found it if anyone else was interested part 66-3002 and 66-3085

(Anyone have pics with this setup(

Edited by Nemo39
Posted

Looking for the ready lift kit that gives 2.5 in the front and like a 1-2 inch block in the back? Just to recover some rake.

Edit: found it if anyone else was interested part 66-3002 and 66-3085

(Anyone have pics with this setup(

Rough country 2.5" front and +1" rear. a6atyvy9.jpg

Posted

With a 2" level and 265 60 20's (basically 33s), should I have the computer reset to compensate for tire size??

Posted

GM will not recal the computer for larger than stock. You will have to get a custom tune or god forbid a programmer to do that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
    • There was a recall on the tailgate in general for opening on its own. Mine has a cap on it and it won’t let the tailgate open.   My tailgate has two holes in the top of the tailgate. I filled them in with silicone sealant. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...