Jump to content

Recommended Posts

Posted

I've noticed a lot of people complaining about rough country plastic spacers which in reality is not plastic but a fiberglass reinforced nylon which is really strong and can handle more pressure per square inch than most metals. Everyone thinks that since its metal its stronger when in reality could be a lot weaker. I have seen so many aluminum kits snap in half do to poor aluminum quality as well as it being a cast piece opposed to a forged piece. For those who don't know the differences a cast piece has molten aluminum poured into a mould to create the piece. A forged piece is a block of molten aluminum that has been compressed and let dry to a solid block then placed into a CNC machine and then the design is cut out. The problem with cast is that when its poured into an mould and let dry small air pockets are formed inside most not visible to the naked eye which create weak spots where the part can easily snap as I have seen happen to a lot of these cheap ebay kits. A forged piece is stronger as it reduces significantly the air pockets in the piece. If you weigh a cast and forged piece same design the forged piece will always weigh more as it has been compressed. Don't buy the cheap aluminum ebay kits, buy from a reputable company as they have done the research and testing. To those who still question the fiberglass reinforced nylon block strength I used to own an f150 with a 3" body lift with reinforced nylon blocks. The truck was in an accident on the highway and rolled over. The truck was totaled cab crushed in frame bent like crazy and twisted as well. The floor of cab ripped apart at spot welds. The blocks were intact, never bent, cracked or snapped a bolt. After seeing this I never question the strength of these reinforced nylon blocks as I know they will not fail. I have not heard of anyone saying these nylon blocks cracking or breaking, just negative remarks from those who don't know what they are talking about.

 

I installed the RC 2 inch lift. I ordered the kit for steel control arms after verifying they were in fact steel using a magnet. I was worried GM might just start painting the aluminum arms. In any case I installed the bolts from the bottom as specified in the instructions and have had no issues with the bolts rubbing on the drive shafts.

 

My truck had a 4 inch rake for some reason: 36 inches front, 40 inches rear measured center of tire to bottom of fender lip. (Sierra Double Cab Z71). I didn't want to go beyond 2 inches. It's now 38 and 40 and I can live with that.

 

Very happy with the lift so far.

post-130867-0-12154600-1411657490_thumb.jpg

post-130867-0-27627300-1411657563_thumb.jpg

post-130867-0-12154600-1411657490_thumb.jpg

post-130867-0-27627300-1411657563_thumb.jpg

post-130867-0-12154600-1411657490_thumb.jpg

post-130867-0-27627300-1411657563_thumb.jpg

post-130867-0-12154600-1411657490_thumb.jpg

post-130867-0-27627300-1411657563_thumb.jpg

Posted

Heck yeah if you will post them on here. All I have are a few snaps at a gas station. Send me a pm with info and I'll send you pics to post.

 

Pics please!

Posted

Works perfectly and I'm so damn excited. A very slight rub on the carpeted fender well at full lock. Nothing I'm worried about as far as trimming at all. 295 70 r18 on a 2014 sierra with a 2.5 rough country lift. Trail grapplers great tires and smooth ride for being mud tires.it won't let me upload my pictures. But as soon as I can I will. But I have never been happier that a huge tire fit this good without a major lift. Has milage took a hit but worth it in my opinion lol!

 

 

Awesome, can't wait to see some pics. The Trail Grapplers are the tires that I have used in the past, and in my opinion are a great tire. Thank you for the info. Enjoy.

Posted

 

I installed the RC 2 inch lift. I ordered the kit for steel control arms after verifying they were in fact steel using a magnet. I was worried GM might just start painting the aluminum arms. In any case I installed the bolts from the bottom as specified in the instructions and have had no issues with the bolts rubbing on the drive shafts.

 

My truck had a 4 inch rake for some reason: 36 inches front, 40 inches rear measured center of tire to bottom of fender lip. (Sierra Double Cab Z71). I didn't want to go beyond 2 inches. It's now 38 and 40 and I can live with that.

 

Very happy with the lift so far.

 

If you want it closer you can take the factory 1" lift blocks from the rear. A 2" rake for me would be perfect for me. I want to raise the front to help clearance but I don't want to level the truck completely. It looks better, but my old 98 was leveled and anytime I put any kind of real weight in the bed or pulled a heavy enough trailer it would look like it was dragging ass and I didn't like that. I even though about the leveling kit for the front and then replacing the 1" blocks in the rear with 2" blocks to raise the back about 1-2". I figured that way it lefts all around while still giving a rake.

Posted

 

If you want it closer you can take the factory 1" lift blocks from the rear. A 2" rake for me would be perfect for me. I want to raise the front to help clearance but I don't want to level the truck completely. It looks better, but my old 98 was leveled and anytime I put any kind of real weight in the bed or pulled a heavy enough trailer it would look like it was dragging ass and I didn't like that. I even though about the leveling kit for the front and then replacing the 1" blocks in the rear with 2" blocks to raise the back about 1-2". I figured that way it lefts all around while still giving a rake.

Thanks for the rear block suggestion. I think I'll leave it as is. Your point about carrying heavy loads is a valid one. I often trailer too. It would not look good sagging with a load.

Posted

I put the RC 2" level kit up front to pick it up, then added 1" to the back to give some rake. Also helps the saggy - ass when hauling or towing.

Posted (edited)

Installed a 2" Top Guns Customz kit. Still on factory Goodyears. I'll be putting on a set of 285/55/20 or 295/55/20 ATs in the near future. Sits right at 0.5" lower in front.

 

307e7985c431928b74fd35d4e2c9b4b9.jpg

 

39487dfb41bf174a9a1c5205a3e9bf3a.jpg

 

bb01ffd9afde05cf1b23da076584cd1a.jpg

 

 

Sent from my iPhone using Tapatalk

Edited by langston1726
Posted

I had a 1.5" kit installed a few days ago. I'm very happy with the results.

 

My gas mileage hasn't changed. The truck does ride slightly stiffer but it's hardly noticeable.

 

post-134614-141188155531_thumb.jpg

 

post-134614-141188159042_thumb.jpg

 

Pre kit measurements:

Front - 36.5"

Rear - 39.25"

Post kit measurements:

Front - 38"

Rear - 39"

post-134614-141188155531_thumb.jpg

post-134614-141188159042_thumb.jpg

post-134614-141188155531_thumb.jpg

post-134614-141188159042_thumb.jpg

post-134614-141188155531_thumb.jpg

post-134614-141188159042_thumb.jpg

  • Like 4
Posted

Has anyone used a BDS 2" leveling kit on a 2014 Z71? how are the cv angles with a 2" level Im looking at instaling one in the next few weeks. Thanks for the help!

Posted

4e81536fdf51d4e723e53632cb066c97.jpg

a6d01e3e6d9107acce57a9f833fec01d.jpg

Added the. 5" wheel spacers. Bumped them out just enough to make me happy.

I like your lights! Where did you get them, or what did you have done. Sweet truck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   0 Members, 0 Anonymous, 994 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...