Jump to content

Window Trim / Moldings

Creeper

By Creeper
in Modifications & Accessories

 Share

Recommended Posts

14SLTZ71 Enthusiast

14SLTZ71

Posted
Posted

Yep, the part number is 22944882. Have one here new in the box. Was going to put it on, now not sure.

I think it would look much better then the grey piece. How hard would it be to install it.

  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

thewhitestallion
thewhitestallion

installed mine today took a total of about 5 minutes to put them on. removal is easy once you know how it works. ill get some pics up tomorrow as I was at work for most of the day.   step 1: roll do

Creeper
Creeper

Long time lurker , first time poster. Like the title says, I'm wanting to get rid of the chrome trim. anybody have a part number for the piece under both windows? Don't know if it would be better to s

Swazimoto
Swazimoto

If you look on you tube there are examples of how to tape it off. Looks like that is the way to go. You won't have to worry about any removal damage. You only need to really worry about the window

Posted Images

brettls1 Enthusiast

brettls1

Posted
Posted

If I looked these up right I believe this is what you are looking for. They are the black moldings without the appearance package. looks like the fronts retail for about 45 bucks and the rears about 50

 

LF pt#20964064

RF pt#20964063

RR pt#20963927

LR pt#20963928

 

Craig

Where are you finding these part numbers? I'm looking for paintable window sill trim so I can make it match my onyx black truck, but cant find the trim anywhere.

robsieb Enthusiast

robsieb

Posted
Posted

I ordered factory black steps and window mouldings online. Purchased take-off door handles and mirror caps off of Ebay and then sold my chrome parts on Craigslist. Ended up $150.00 out of pocket when all was said and done and have all factory painted or new parts. No plasti-dip here.

 

Mirror caps are almost impossible to remove without breaking the clips that hold them on but obviously some have figured out how to do it since the ones I got off Ebay were perfect.

 

Door handles take about 5 min. each after you do the first one. Tricky part to them is getting the fork inside the door to engage with the handle but it's easy after you do the first one. Some suggest using fishing line but I used a 90 degree pick and it worked just fine. Removal of the handles is simple. One torx screw behind a plastic cap on the jamb part of the door above the latch. Just don't remove the screws on the rear doors all the way. I've heard the nut plate backing them up can fall into the door if you do. Front ones are ok to remove all the way.

 

Door mouldings are very easy to remove and replace as well. Front doors have a torx screw at the rear of the moulding inside the door. With the window down there are four white plastic clips that hold the moulding to the door. All you have to do is pull them slighly towards the inside of the car using a small pick and they wiil release. You can then slide the front mouldings rearward about a 1/4 of an inch so they pull out of the mirror housing. Rear doors are similar in that they have a torx screw but its on the forward part of the door and are hidden behind a piece of the rubber door seal. Releasing the white clips is the same as on the front doors.

 

Hope this makes sense and helps out as I totally suck at write-ups.

  • Like 1
1kwik72 Enthusiast

1kwik72

Posted
Posted

Where are you finding these part numbers? I'm looking for paintable window sill trim so I can make it match my onyx black truck, but cant find the trim anywhere.

 

 

I own a repair shop and have access to a software program that can pull up OEM part diagrams and part numbers for several of the major manufacturers.

 

Craig

  • Like 1
brettls1 Enthusiast

brettls1

Posted
Posted

I ordered factory black steps and window mouldings online. Purchased take-off door handles and mirror caps off of Ebay and then sold my chrome parts on Craigslist. Ended up $150.00 out of pocket when all was said and done and have all factory painted or new parts. No plasti-dip here.

 

Mirror caps are almost impossible to remove without breaking the clips that hold them on but obviously some have figured out how to do it since the ones I got off Ebay were perfect.

 

Door handles take about 5 min. each after you do the first one. Tricky part to them is getting the fork inside the door to engage with the handle but it's easy after you do the first one. Some suggest using fishing line but I used a 90 degree pick and it worked just fine. Removal of the handles is simple. One torx screw behind a plastic cap on the jamb part of the door above the latch. Just don't remove the screws on the rear doors all the way. I've heard the nut plate backing them up can fall into the door if you do. Front ones are ok to remove all the way.

 

Door mouldings are very easy to remove and replace as well. Front doors have a torx screw at the rear of the moulding inside the door. With the window down there are four white plastic clips that hold the moulding to the door. All you have to do is pull them slighly towards the inside of the car using a small pick and they wiil release. You can then slide the front mouldings rearward about a 1/4 of an inch so they pull out of the mirror housing. Rear doors are similar in that they have a torx screw but its on the forward part of the door and are hidden behind a piece of the rubber door seal. Releasing the white clips is the same as on the front doors.

 

Hope this makes sense and helps out as I totally suck at write-ups.

By door molding do you mean window sill trim? If so can you send me the link to where you purchased it? Also where did you find painted handles and mirror caps? I can't find any in onyx black anywhere.

brettls1 Enthusiast

brettls1

Posted
Posted (edited)

I have a 2014 sierra crew cab and I'm willing to trade my chrome window trim straight up for black. Also does anyone know if I was to order black textured plastic handles if they are good enough quality to paint?

Edited by brettls1
thewhitestallion Senior Enthusiast

thewhitestallion

Posted
Posted

Textured trim rarely paints well.

 

some truth to that satement. if you take it to some joe blow paint shop and have them paint them without the person who is sanding/painting knowing what the hell they are doing then yeah they will come out looking like chit. but if the body shop knows how to paint them then they will looks just as good as if they were not textured.

 

i had the upper and loser plastic textured pieces on my 02 silverado painted black to match and they came perfect. they never started to chip or anything due to the plastic or quality of paint. the only thing is i was off road one time and the lower plastic piece hit the ground or something and it caused the plastic to felx which in turn caused the paint to crack. no the painters fault or the textured plastic being the problem it was the plastic felxing that caused the problem well maybe my driving had something to do with it too. but since you door handles and mirror caps have no chance of "bottoming out" anywhere i wouldnt worry about that.

robsieb Enthusiast

robsieb

Posted
Posted

Bre

 

By door molding do you mean window sill trim? If so can you send me the link to where you purchased it? Also where did you find painted handles and mirror caps? I can't find any in onyx black anywhere.

Yes, window molding. Sorry about the confusion. Purchased mine at Genuinegm.com. Shipping from them is usually cheaper than from gmpartsdirect.com. Part numbers below:

 

Black Window Moldings

Frt Right 20964063
Frt Left 20964064
Rear Right 20963927
Rear Left 20963928

 

I found the mirror caps and handles on Ebay from this seller: http://www.ebay.com/usr/ntftakeoffs The 2014 stuff seems to get sold pretty quickly so you have to keep an eye on it daily.

  • 4 weeks later...
No Tyme Senior Enthusiast

No Tyme

Posted
Posted

2014 GMC Sierra CrewCab chrome window trim.

The prices are basically the same at most of the online retailers I checked. Free shipping is probably where you will see the difference.

I can't pull up this photo of the part #'s. Can you email or attach it to me via private message?

14SLTZ71 Enthusiast

14SLTZ71

Posted
Posted

I can't pull up this photo of the part #'s. Can you email or attach it to me via private message?

PM sent

jdthomas24 Enthusiast

jdthomas24

Posted
Posted

im interested in swapping black painted door handles for my chrome ones as well as the door trim, my chrome for the black..

cansled Enthusiast

cansled

Posted
Posted

Wish I could do it with you, but I have a double cab. Still looking for someone that wants to trade the chrome window trim for my black window trim on a double cab.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   1 Member, 0 Anonymous, 515 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...