project cars/trucks

[95z71performer]

what are your project vehicles new old or otherwise and what's planned for them

 

 

 

one I'm helping with is a 1 of 1 AMC Javelin I'm working on with my uncle to get it back into good condition but it's gonna take a while and we need a 69 hood not a 68 oh and some new 1/4's, drivers side pillar, and new floors this isn't including the one missing part on the car that's the boomerang shaped support behind the front bumper

 

the other is my truck but that's not fully starting yet

[hzhardy]

I am rebuilding fir a friend a 1985 gmc step side. We just got the frame powder coated silver vain and under coated the cab. This weekend we will set the cab back on the frame and get the body work done. I have a 1939 ford sitting in my enclosed trailer wanting a new paint job but I am to busy. I also have a vn750 and a vn1500 mean streak i am rebuilding ( cant make up my mind on the paint job). I have three racing go kart i am build for myself and a friend to race. Lastely i have a 1995 miata in my garage im for a color change and interior. Can you tell i am a very busy guy lol. Oh and i forgot my pickup.

[RyanbabZ71]

No room for one would love a 68-70 chevelle.

 

Just mod my camaro. Not much more to really do as I just added new rims this December. Going to hydro dip a few interior pieces when it warms up a bit

 

 

 

Ryan

[hzhardy]

Here are sime pics of what i am doing

My vulcan 750. It is becoming a hard tail fat bob

My meanstreak came to me in 6 tupperware containers. The engine had spun the rods. Bought it for 600 dollars and have about 550 fixing it. Mainly soent money on fixing the crank

This is a 6.5 horse honda clone that has been lightly stroked and fully built to be a 15-18 horse alchohol motor. It gas a zero deck hight and fully ported heads and full race valve job. I did everything i wish i could do to a car engine lol. Sadely i still have 1300 in parts on the thing not includeing the 160 dollar balance job and my time

oh yeah my lawn mower has roller rockers lol not to mention it has a billet rod and flywheel fully polished crank and balanced at 8k rpms est about 18hp

 

 

 

kart 2 to be part of our Alcoholics Anonymous racing team

recently finished this. Went through the tranny. Valve body was bad

 

some reason i dont have many digital pics of this one. Posted this on my cell so I will fix grammer later. These long posts are a pain especially with pics.

[hzhardy]

Ill post some pics of the gmc I am rebuilding tommorow

[GMC-AT]

Back when trucks were made of steel

 

[KARNUT]

92 chevy extended cab 383, dart heads, msd, headers,whipple s/c 5 or 10lbs custom seat, wheels kenwood,etc bad to the bone. Has been a project since new. Im owner number 3. Trucks looks new, first time I did it this way. Bought on ebay for the price of the whipple new. Was my DD for a year. Now that I bought a new one may sell it buy a car to play with.

[KMGZ400]

Back when trucks were made of steel

 

I'm drooling at that

[NitroCherokee]

Back when trucks were made of steel

 

 

One day I will have a K5, beautiful truck!

[1kwik72]

My Nova is more or less done at this point but every once in a while I get the itch to go a bit faster and I end up building a motor with more power. Currently it has a 440 cubic inch small block Chevy with 18° cylinder heads that makes a bit more than 800 at the crank. Best E.T in the quarter mile is 9.28 @ 145 mph on stock suspension with 10.5" wide tires. It is still plated and insured although I rarely street drive it much anymore. 114 octane at 12 bucks a gallon gets kinda expensive LOL Although I have still occasionally hit a local car show with it.

 

Here are a few pictures of its evolution

 

Right after I bought it around 1997 daily driver with a mild 350

 

Right after the cage was installed getting ready to blast the subframe

 

 

Subframe painted and body in primer ready for paint.

 

 

Buddy of mine painted it in his garage

 

 

Assembled right after painting

 

 

 

Waiting in the staging lanes as it is today. It has wider wheels in the back and different springs so it sits a bit different compared to the previous picture

 

 

And an action shot

 

 

 

 

Here is a link to a video on a really hot day when it was about 2 tenths and about 3 mph off where it usually runs

 

https://www.facebook.com/photo.php?v=2199973642888&l=640599441223664511

[KARNUT]

What a ride, may need wheelie bars next!

[mike94silverado]

what are your project vehicles new old or otherwise and what's planned for them

 

 

 

one I'm helping with is a 1 of 1 AMC Javelin I'm working on with my uncle to get it back into good condition but it's gonna take a while and we need a 69 hood not a 68 oh and some new 1/4's, drivers side pillar, and new floors this isn't including the one missing part on the car that's the boomerang shaped support behind the front bumper

 

the other is my truck but that's not fully starting yet

is the 72 different? I know where there is a 72 parts car for a grand and the UP isn't all that far from you

[Chris]

2011 F150 5.0 I will edit and post pics when I get to my computer

Loaded, 4x4, everything but nav and sunroof. 11,000 miles paid 10k

Drove to Tuscon, AZ to get a new front end

[95z71performer]

is the 72 different? I know where there is a 72 parts car for a grand and the UP isn't all that far from you

 

unfortunately yes it's a very different hood 68 and 69 were the only ones that body style and they had different hoods

 

I also have plans set up for a 50's pickup my dad and I want to do whenever we get the money

[66nova]

My Nova is more or less done at this point but every once in a while I get the itch to go a bit faster and I end up building a motor with more power. Currently it has a 440 cubic inch small block Chevy with 18° cylinder heads that makes a bit more than 800 at the crank. Best E.T in the quarter mile is 9.28 @ 145 mph on stock suspension with 10.5" wide tires. It is still plated and insured although I rarely street drive it much anymore. 114 octane at 12 bucks a gallon gets kinda expensive LOL Although I have still occasionally hit a local car show with it.

 

Here are a few pictures of its evolution

 

Right after I bought it around 1997 daily driver with a mild 350

 

 

Right after the cage was installed getting ready to blast the subframe

 

 

 

Subframe painted and body in primer ready for paint.

 

 

 

Buddy of mine painted it in his garage

 

 

 

Assembled right after painting

 

 

 

 

Waiting in the staging lanes as it is today. It has wider wheels in the back and different springs so it sits a bit different compared to the previous picture

 

 

 

And an action shot

 

 

 

 

 

Here is a link to a video on a really hot day when it was about 2 tenths and about 3 mph off where it usually runs

 

">

 

Awesome!