Post your 2014+ wheel/tire set-up

[matt76cmich]

Here are mine:

2" RC level

20x9 OE wheels machined black. +31 offset

275/60/20 Falken Wild Peak AT

No Rubbing or trimming

 

 

 

 

Pretty much what I'm about to do.

 

Just found this site, way more info than i could have asked for in here.

 

I was going to try to fit the 275/60/20 AT3/Ws without a leveling kit, but I'm sold on running the leveling kit now.

 

 

Sent from my SM-G935P using Tapatalk

[cid.yamaha]

Pretty much what I'm about to do.

 

Just found this site, way more info than i could have asked for in here.

 

I was going to try to fit the 275/60/20 AT3/Ws without a leveling kit, but I'm sold on running the leveling kit now.

 

 

Sent from my SM-G935P using Tapatalk

Is that just a 2" rc in the front ? Stock on the rear ?

[Waaazooo]

Pretty much what I'm about to do.

 

Just found this site, way more info than i could have asked for in here.

 

I was going to try to fit the 275/60/20 AT3/Ws without a leveling kit, but I'm sold on running the leveling kit now.

 

 

Sent from my SM-G935P using Tapatalk

275/65-20... +16 offset makes it fit puuuuurfectly

 

 

Sent from my iPhone using Tapatalk

[matt76cmich]

Is that just a 2" rc in the front ? Stock on the rear ?

My truck is completely stock at this time. I am going to do a RC 2" and Falken 275/60/20 AT3/W tire

 

Sent from my SM-G935P using Tapatalk

[matt76cmich]

275/65-20... +16 offset makes it fit puuuuurfectly

 

 

Sent from my iPhone using Tapatalk

For whatever reason i can't find the 275/65/20 for sale on Discount Tire's site. See what they say when i stop in the store. Just gotta work this extra OT for a couple weeks first.

 

Sent from my SM-G935P using Tapatalk

[matt76cmich]

2016 Silverado

2 1/4" Front Level Only

OEM GMC All Terrain Rims, Plasti dipped black with Glossifier

Midnight Edition Center Caps

275/60/20 BF KO2's

Zero Rub, Perfect Fit

Out of curiosity, could you have run that tire without the leveling kit?

 

Sent from my SM-G935P using Tapatalk

[Abearclaw]

My truck is completely stock at this time. I am going to do a RC 2" and Falken 275/60/20 AT3/W tire

 

Sent from my SM-G935P using Tapatalk

Those new falken at3's look sick

 

 

Sent from my iPhone using Tapatalk

[bdm62987]

Out of curiosity, could you have run that tire without the leveling kit?

 

Sent from my SM-G935P using Tapatalk

 

Not 100% sure but I wanna maybe? Have to spend hours searching on here

[Waaazooo]

For whatever reason i can't find the 275/65/20 for sale on Discount Tire's site. See what they say when i stop in the store. Just gotta work this extra OT for a couple weeks first.

 

Sent from my SM-G935P using Tapatalk

keep looking! I got mine on tire rack. Bfg ko2

 

 

Sent from my iPhone using Tapatalk

[rcoles871]

I was looking to tone down the chrome on my denali and preferred to stick with an OEM wheel. I really liked the looks of the black 22" wheel but preferred a 20" wheel for several reasons. I ended up getting the 20x9 Black Rhino "Peak" wheel which looked very similar and was able to use my stock center caps. They are 20mm offset and I kept the 1/4" spacer plates on the front after changing the stock wheels but don't it was needed. The factory center caps are larger than the Black rhino's (+/- 3/8" larger) and don't sit in the recess but they snap in with a little extra force and are very snug. I was pleasantly surprised that they fit.

[tyrich88]

 

Not 100% sure but I wanna maybe? Have to spend hours searching on here

you can run 275/60/20 without a level

on stock wheels

Edited September 21, 2016 by tyrich88

[16_sierra]

RC 2.5inch with rear blocks is going on today, tires tomorrow. Gonna test fit the 275/65r20s and the 305/55r20 Ko2s. I've read that 275/65r20 will rub slightly but a little trim or pulling back fender liner will solve this, but worry that and change in driving conditions will shove the tire straight into the well. The 305/55r20 I've heard fits no problem. Just worried that it won't be a noticeable difference from stock tire.

Edited September 22, 2016 by 16_sierra

[Sdfd504]

So I have looked through 30+ pages of this thread and I am still as undecided as ever as to which direction I'm going to go. I have a 2014 Denali 1500 with a RC 2.5" level kit and I'm wanting to go from stock wheels and rims to a 20x9 or 10 with a 33"-34" BF Goodrich AT tire. I am wanting to keep the setup as flush as possible with the aggressive look still. Would a 305 55 20 with a 20x9 stick out of the fender a huge amount and if not which offset would I need? I know a 276 60/65 20 is the popular size but I think it looks very tall and narrow from what I've seen.

[Abearclaw]

So I have looked through 30+ pages of this thread and I am still as undecided as ever as to which direction I'm going to go. I have a 2014 Denali 1500 with a RC 2.5" level kit and I'm wanting to go from stock wheels and rims to a 20x9 or 10 with a 33"-34" BF Goodrich AT tire. I am wanting to keep the setup as flush as possible with the aggressive look still. Would a 305 55 20 with a 20x9 stick out of the fender a huge amount and if not which offset would I need? I know a 276 60/65 20 is the popular size but I think it looks very tall and narrow from what I've seen.

you need an offset as close to factory as possible to sit nice and flush. Here's a pick of my old truck with 305/55r20's on factory wheels

 

 

Sent from my iPhone using Tapatalk

[Waaazooo]

RC 2.5inch with rear blocks is going on today, tires tomorrow. Gonna test fit the 275/65r20s and the 305/55r20 Ko2s. I've read that 275/65r20 will rub slightly but a little trim or pulling back fender liner will solve this, but worry that and change in driving conditions will shove the tire straight into the well. The 305/55r20 I've heard fits no problem. Just worried that it won't be a noticeable difference from stock tire.

I assume that the 275/65 could run depending on your offset or if the tires run large (I have bfg ko2). I still have zero signs of rubbing after 2500 miles.

 

 

Sent from my iPhone using Tapatalk