Jump to content

Recommended Posts

Posted

Called again it is the new GM redesigned condeneser.

I'm curious to see how GM has addressed the condenser issues compared to how the aftermarket has approached them.

Posted (edited)

Judging by what I've seen and someone mentioned here a few posts ago, I'd say that the dryer wasn't welded properly to the condenser.fec389ec93cd19341bdbd66038227dcb.jpg

Edited by mois93da
Posted

Btw I had to refill the refrigerant again Sunday and I was on the road, I just happened to have my mani gauges in the truck, and my kids and wife were in there with me. I pulled up to o'reily and bought a can tap (happened to have a can of r134 in the truck too) because I had a half can still at home. When I went up to pay for the tap I got curious and asked the gentleman if he could look up a condenser for me, and He says, "we don't have any here but we show three in Houston. Needless to say, i paid for it right away, and went to pick it up. Did the install on Tuesday. It comes with a lifetime warranty.

 

70d1f7d9f3a90bb45b7c4c855f65405e.jpg

  • 6 months later...
Posted (edited)

well my A/C went out yesterday...thoughts??  I don't think it is compressor...

anyone replaced theirs themselves?  thinking it is the condenser...from my research.

im not seeing signs of leaking on the line itself...just the condenser...

i do not have the bracket on the line either.

2014 94k miles

 

IMG_3020.JPG

Edited by JUSTINASS
Posted
1 hour ago, JUSTINASS said:

well my A/C went out yesterday...thoughts??  I don't think it is compressor...

anyone replaced theirs themselves?  thinking it is the condenser...from my research.

im not seeing signs of leaking on the line itself...just the condenser...

i do not have the bracket on the line either.

2014 94k miles

 

IMG_3020.JPG

You’ll need a new condenser and an upgraded/modified line set (aka, a couple of hoses with a Chinese manf clamp :/  )

Posted
11 hours ago, bdbake01 said:

You’ll need a new condenser and an upgraded/modified line set (aka, a couple of hoses with a Chinese manf clamp :/  )

yeah and i ordered the hose off of amazon and the bracket...got a condenser from autozone...

are you saying there is a better modified line available? can you expand on this info?

Posted
6 hours ago, JUSTINASS said:

yeah and i ordered the hose off of amazon and the bracket...got a condenser from autozone...

are you saying there is a better modified line available? can you expand on this info?

The line set is, as far as I know, the same. The bracket/clamp is simply two pieces of metal that span the compressor inlet and outlet to brace them. If that’s the bracket you have, that’s all I know of. 

Posted

Are the 2017's ok or is this something to look out for?  Mine has a build date of February 2017, and by reading this thread, it sounds like the redesign parts may not have been in production yet?

  • 2 weeks later...
Posted

I just joined the party, My Condenser went out at 67,000 miles. What a joy! I am a little late on this thread but I wanted to get some input from the guys that have dealt with this issue already and what seems to be the best route of action. The way I see it I have three options. 

1. Call my local dealer, charm them and try and work out the best possible price.  - my least favorite route.

2. Buy the Condenser and replace it myself. (would you recommend the AC DELCO or a aftermarket brand)

3. I have a good friend with a welding/Fabrication shop. We possibly will be able to do the nitrogen purge and weld that sucker. I am just not sure how the process goes.  < my favorite and cheapest route. 

 If anyone has the information on how to properly flush the system with nitrogen and weld it. I am all ears, If that cant be done I will explore the other options. 

Thanks in advance. 

  • Like 1
Posted

thought i would update to help others out....

i got the murry condenser and replaced it myself... i think it was around $60.00

i also bought the bracket from amazon...$8

my line looked perfect and didn't show any signs of leaking so i didn't replace it.

after replacing the condenser i took it to a local a/c shop i trust and had them pull a vacuum and recharge it...they charged me $100.

overall pretty simple install minus a few bolts that are hard to get to on the underside of the radiator support.

sucks knowing that this is pretty much a defective part from the factory and i had to waste a sunday afternoon fixing it...but i do have 92K trouble free miles, so i can't complain too much.

  • Like 1
  • 2 weeks later...
Posted

thought i would shed some light...

summer is gonna be upon us soon and guess what no ac and i'm in the south!!!

researched problem and i found this thread.  Gm dealer gave me parts at wholesale price so i decided since i am in there might as well replace KNOWN ISSUES..   so i replaced....

1) condenser

2) high pressure line from compressor to condenser

3) installed updated bracket 

4) two band aids later

5) pulled a vacuum and it held (fingers crossed)

not a hard job just be ready to cuss the 3 bolts on the cross member (each side) that are on the bottom

(note video is same for a 2014)

 

  • Like 2
  • 2 months later...
Posted

Unfortunately, my 2015 Silverado fell victim to the same issue right around Jan I think. Luckily it hadn't been too hot after so I didn't think much of it until I started searching for the cause. That's when I came across all the thousands of issues and complaints for the same thing. I took my truck to the dealer where I purchased it only to have them tell me that they didn't have any AC service techs working on a Saturday AND that the part wouldn't be covered under warranty. Oh man was I pissed considering my truck only had like 32k miles on it at the time so it should have been covered under warranty. Anyways, I've filed a complaint and I actually found a replacement online for under $100. I plan on fixing it myself and then having a friend with mech shop recharge the system for me. It really sucks that GM hasn't issued a recall for this issue yet, I'm seriously thinking about trading my truck in for a Tundra after this. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,925
    Total Members
    8,960
    Most Online
    btm
    Newest Member
    btm
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,309 Guests (See full list)


  • Latest Articles

  • Posts

    • Can ask that about a lot of places.   Holiday sells 91 for $1 over 87 octane. BP 93 is 80 cents. Amoco 93 is 80 cents Kwik Trips is $1.20 for 92 or whatever they have and $1 for the 91.   I know that this is not exactly same as what you are saying with the premium to premium debate of those two stations but why is there such a difference. Top Tier this and that, it's all BS. All the fuel comes from the same damn refinery, so give me a break.
    • Why does Mobil Premium cost 90 cents a gallon more than Shell Premium when their regular offerings are but pennies apart? 
    • Was all the way down to $3.69 a gallon but then jumped back to $3.99 just because for some reason.   Diesel floats between $4.80's to $5.10ish a gallon. I even saw Diesel #1 for $6.09 today but nobody in there right mind even buys that in the summer.
    • Mine just keeps lagging or getting stuck on the reverse camera. When I turn off the truck, get out, and close the door it will still stay on. It’s very intermittent and I would not be able to duplicate the issue. 
    • I was checking out fuel prices at my farm fuel retailer at their pumps and yes the farm price is a bit lower than the non dyed fuel and was glad to see that the regular farm gas price has dropped a lot from what it had been but what blew me away was the price of diesel as the spread now compared to before the prices went up earlier in the year, diesel was actually slightly lower than gas which was a switch from the theme the last number of years. However that sure isn't the theme lately and definitely not right now. The prices I will post are not from that retailer but just looking at gasbuddy for the main city in this area and instead of posting the lowest price someone found I will list the higher price ( and that may not be the highest price, just whatever someone posted on gasbuddy ).   So regular gas and there are a lot of stations listing the same price for regular is 1.68 a liter, premium 2.00 a liter. Diesel 2.03 a liter for a top price I saw on diesel.   Figures out to 6.36 a us gallon Canadian funds for regular and 7.68 for diesel. With the US exchange rate it would be 4.58 us for regular and 5.53 for diesel.    Thought I would figure that out to get a picture of what it settles out like compared to various US prices and its about the same as the current price in Fairbanks AK as Anchorage tends to be lower. So yes, these would be the prices and higher along the way on the Alaska highway where they know they have a captured market !, for fuel prices for those beginning the long drive back to the lower 48   The problem is our Canadian dollar and going to the states that have the high prices, boy do we pay then !
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...