Jump to content

Baja Kits Upper Control Arms (New)

SGMJAX

By SGMJAX
in Classifieds (Buy/Sell/Trade)

Recommended Posts

SGMJAX Enthusiast

SGMJAX

Posted
Posted

Selling a brand new set of Baja kits boxed upper control arms. I sold my 16 1500 for a 17 2500 so these never made it on the truck. New they run $899 before tax and shipping. I am asking $750 and we split the shipping. They fit 14-17 silverado/ sierra with factory steel upper control arms.

 

I also have a set of King Front OEM seriers coilovers that are used (new stickers added since picture) Roughly 5k miles on them. I would let them go for $500, package deal for $1200.

 

 

post-133574-0-99099200-1492740326_thumb.jpg

post-133574-0-12232400-1492741403_thumb.jpg

post-133574-0-99099200-1492740326_thumb.jpg

post-133574-0-12232400-1492741403_thumb.jpg

post-133574-0-99099200-1492740326_thumb.jpg

post-133574-0-12232400-1492741403_thumb.jpg

post-133574-0-99099200-1492740326_thumb.jpg

post-133574-0-12232400-1492741403_thumb.jpg

bobbya08 Enthusiast

bobbya08

Posted
Posted

I'm more interested in the coilovers if the fit but I'd be willing to buy the whole package if they will work.

 

 

Sent from my iPhone using Tapatalk

SGMJAX Enthusiast

SGMJAX

Posted
  • Author
Posted

I'm more interested in the coilovers if the fit but I'd be willing to buy the whole package if they will work.

 

 

Sent from my iPhone using Tapatalk

Yes will fit 17 model. Do not believe there is any major change suspension wise from 14-17. I'll fix that in the add.

SGMJAX Enthusiast

SGMJAX

Posted
  • Author
Posted

I want the shocks for sure. Let me check with the boss and make sure I can get the control arms also.

 

 

Sent from my iPhone using Tapatalk

 

Just added a picture of them. I suggest getting both if travel is a large concern. The upper control arm becomes the limiting travel factor when adding aftermarket coilovers. You can run the stock arms if you want though, it is not required to have aftermarket ones.

SGMJAX Enthusiast

SGMJAX

Posted
  • Author
Posted

What do you think shipping would be to Center Tx. 75935

 

 

Sent from my iPhone using Tapatalk

 

Ill try to get that info tomorrow, I am in Tampa FL so its not that far. The shocks have some weight to them so that may be the only real cost factor. Either way I will split it with you to lessen that cost. Emailed you more pictures.

corncob Enthusiast

corncob

Posted
Posted

I want the shocks for sure. Let me check with the boss and make sure I can get the control arms also.

 

 

Sent from my iPhone using Tapatalk

Solid pick-up [emoji1360]

 

 

Sent from my iPhone using Tapatalk

Aboogie808 Enthusiast

Aboogie808

Posted
Posted

I am in Tampa, which I can meet with you. I am interested in picking up the king shocks. Will it fit with a lift kit? Or do I need to get extension? Thanks.

bobbya08 Enthusiast

bobbya08

Posted
Posted

I am in Tampa, which I can meet with you. I am interested in picking up the king shocks. Will it fit with a lift kit? Or do I need to get extension? Thanks.

I'm buying the whole package deal already.

 

 

Sent from my iPhone using Tapatalk

Aboogie808 Enthusiast

Aboogie808

Posted
Posted

I'm buying the whole package deal already.

 

 

Sent from my iPhone using Tapatalk

 

 

If you don't take it, I will grab it tomorrow.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I have never seen GM instructions for the other trucks as per the HD with the 6 speed or the half tons but had got the impression that the HD trucks with the 6 speed were not having the same problem that the 10 speed and pan presented. Also video that I have seen of the HD 10 speed with the gas engine starting in 2024 model year showed that it was a real struggle to even make it work when pulling down hard on the exhaust after undoing the exhaust hanger bracket on the side of the transmission as after all there is little room for the pipe to even go down behind the Y joint as it soon would hit a frame cross member. Also that they had tried just like I did with the gasket off and no way was that pan coming out any way they tried to manipulate the pan. From that as well as the local transmission shop talking about the pain in the rear issue, I was not expecting my pan to come out because GM shows it was not even intended to come out without dealing with the exhaust piping.    It would be nice to claim, here's what you do and its easy to remove the pan guaranteed on any HD truck with the gas 10 speed but dollars to donuts the next guy trying what I did would not have the same luck as the exhaust was just manufactured slightly different and be pissed off at my claim that the pan comes out with no issue. Its more of a try and see if your particular truck might work like mine did .... or not !. 
    • carkhz316
      Correct way to service 2024 l8t allison trans?

      By carkhz316 · Posted

      Sorry I didn't see this until now, but it works on both the 6 speed and 10 speeds, as well as all the half tons too.
    • 1998sleaze
      Engine vibration after motor mount replacement.

      By 1998sleaze · Posted

      Hello, I have a 2018 GMC Sierra 1500 that I recently changed both motor mounts on due to the driver's side being blown out. After replacement I seem to have a steady vibration that I can feel in the pedals and the back of the seat. At this point I'm convinced that the aftermarket "Anchor" branded mounts I used are not performing as well as OE, the only real reason I ended up using the mounts in question was because my local dealers were out a few months to get a Driver's side mount. I've tried "Neutralizing" the mounts according to the motor mount TSB published for these truck to no avail. My trans mount is also in great shape and seems to be absorbing vibrations swimmingly. As far as I can tell there is no issues idling, my idle RPM is steady and I've recently put GM plugs and wires on, however, I have not cleaned the throttle body or intake valves. Any one else have a similar experience with aftermarket mounts? Patience certainly is a virtue that I wish I exercised here. Thank you!
    • CamGTP
      Winter Returned

      By CamGTP · Posted

      I still saw people out for runs, on their bikes/motorcylces, jeeps with the doors off driving around here the past 2 days. I guess we are just used to it here haha.   Tasted like a bonfire the last 2 days.
    • CamGTP
      6.2L (L9H) Owners - Get all your questions answered here

      By CamGTP · Posted

      The TCM has to be flashed before it can drive.   If you installed it the way it is, it has the OS (operating system/program) from the 2010 truck you got it from. That will not match with the VIN/OS pair that your 2013 truck has.   You can do the full install. Then tow it to a dealership and they can flash the trucks PCM/TCM with the latest program for your VIN.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...