Jump to content

Recommended Posts

Posted

Had mine flushed this morning. It was covered under warranty even though I don’t have the “shudder”.

Have only driven 100 miles, but seems to shift a bit smoother... time will tell. [emoji1695]


Sent from my iPhone using Tapatalk

Posted

I had the flush done a few days ago. 200 miles and the shudder is gone. However, the truck still shifts like it is confused. The clunk is still preset. Taking it in Thursday for a TSB covering the valve body. I will report back after the fix is done.

Posted

This is the main reason I traded in my '15 - I complained about the transmission every time I took it in for anything, and was basically told that everyone has the same complaint and there was not a fix. They flushed the fluid 2 or 3 times, replaced the TC and it was still a piece of shit. I had the extended warranty, but that had a $250 deductible every time I wanted to use it, so I traded it in on a '18 Denali - so far (3200 miles) the transmission is night and day different... although this one has the same 70mph shake as the '15 did. 

Posted

What was up with the transmission in your 2015? My 2018 doesn’t have any shaking at higher speeds, just the low speed clunk upon throttle application 

Posted

Yeah, when I ordered my 18, CC, 6.2 the owner (a close buddy of mine) of the dealership looked at me and said you know, you may have issues with the transmission clunking, told him I’ll bring it back to him and he’ll fix it, he laughed. First week, drove to Austin and noticed it, then while parked in a parking lot it felt like I got bumped, no one around but the transmission just thumped hard. I later did a tune, turned off the AFM and along with not having shifting issues, haven’t felt the thump since

 

 

Sent from above

 

Posted
1 hour ago, TXGREEK said:

Yeah, when I ordered my 18, CC, 6.2 the owner (a close buddy of mine) of the dealership looked at me and said you know, you may have issues with the transmission clunking, told him I’ll bring it back to him and he’ll fix it, he laughed. First week, drove to Austin and noticed it, then while parked in a parking lot it felt like I got bumped, no one around but the transmission just thumped hard. I later did a tune, turned off the AFM and along with not having shifting issues, haven’t felt the thump since

 

 

Sent from above

 

You did the tune in your 18? What tune did you do? I want to do a black bear tune but it just sucks that they can’t tune the TCM. It’s always seemed to me like this whole deal is simply a tuning issue on GMs part

Posted
You did the tune in your 18? What tune did you do? I want to do a black bear tune but it just sucks that they can’t tune the TCM. It’s always seemed to me like this whole deal is simply a tuning issue on GMs part


Mine is just a SuperChips tune, set on performance along with disabling AFM and other preferences. Did notice acceleration difference too on my 6.2 after my CST lift and 34” Nitto Ridge Grapplers


Sent from above
Posted

For anyone watching this thread,  I'm  scheduled to go in this Monday 3/18.  My truck would get the shudder literally nearly everyday for the weeks leading up to this. 

 

I kid you not, since I scheduled this a few days ago, it has only shuddered one time and has overall been shifting better than usual.  Like wtf???

 

The way my service advisor talked it sounds like they will perform this flush no matter what the results of the test drive are. 

Posted
3 hours ago, SkiDooNick700 said:

For anyone watching this thread,  I'm  scheduled to go in this Monday 3/18.  My truck would get the shudder literally nearly everyday for the weeks leading up to this. 

 

I kid you not, since I scheduled this a few days ago, it has only shuddered one time and has overall been shifting better than usual.  Like wtf???

 

The way my service advisor talked it sounds like they will perform this flush no matter what the results of the test drive are. 

Let’s hope they aren’t just making you feel good...I’m told that the PICO test needs to show something for GM to pay the dealership for the fluid and time. Maybe you have a good dealer  :thumbs:

Posted

I was just at the dealership to get the flush done.I told them I had the shudder which I don't just hopping to get the flush done.They said just like SS502 said it didn't hit the PICO test.There not allowed to change the fluid unless it hits the score needed.

Posted

Ill be so frstruated if thats the case.  I will have to work with my serivce advisor for next steps... come back in a couple 100 miles etc...? Blahhh i dont even want to think about it!! 

Posted

Dropped it off Monday night. Didnt hear back today.  Maybe they were like "oh man this trans is f'ed we gotta put a new one in"

 

LoL wishful thinking!! 

Posted
On 3/12/2019 at 10:21 PM, dewey05sd said:

I had the flush done a few days ago. 200 miles and the shudder is gone. However, the truck still shifts like it is confused. The clunk is still preset. Taking it in Thursday for a TSB covering the valve body. I will report back after the fix is done.

 

Can you share info on the Valve body TSB?  Just got off the phone with my Service Adviser.  He updated me that the trans tech is on the phone with GM Tech Support trying to upload whatever data files they created to prove that there is an issue with my trans.  He also mentioned that they may need to replace the Valve Body. 

Posted

I wish I had more information. I ended up taking it in and I had the shop foreman ride with me. I wasn’t able to replicate the confused shifting. Not that it helps me, you or anyone for that fact but he did say out of 300 transmissions he has serviced for this problem only 2 he said shifted flawlessly. At this point, I am just going to drive it until something serious happens and hope GM comes out with a fix for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,912
    Total Members
    8,960
    Most Online
    RangerRick17
    Newest Member
    RangerRick17
    Joined
  • Who's Online   5 Members, 1 Anonymous, 557 Guests (See full list)


  • Latest Articles

  • Posts

    • Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...