Jump to content

Recommended Posts

Posted
Finished everything up. Had to make my appointment for the alignment next Friday due to shipment delays. 1.5 motofab & 35 12.50 18 Ridge Grapplers with 2" Bora spacers. 
CD5300A9-68E5-4486-8FA9-0DA005D4C340.thumb.jpeg.e62559380c5bf36f0119e0695ac2921a.jpeg
B14A6733-8643-4D5C-A0DB-A933D4ED4AB5.thumb.jpeg.a04e0a5f12c7c93bb16075d2754ddeb7.jpeg
Any rubbing with this setup? I want something similar when the time comes. So over factory trucks you have the 2" TB lift and then the 1.5" moto for a total of 3.5", how are your cv angles? Any close up pics of suspension parts would be appreciated. Truck look great btw

Sent from my ONEPLUS A6013 using Tapatalk

Posted
2 hours ago, JR09country said:

Any rubbing with this setup? I want something similar when the time comes. So over factory trucks you have the 2" TB lift and then the 1.5" moto for a total of 3.5", how are your cv angles? Any close up pics of suspension parts would be appreciated. Truck look great btw

Sent from my ONEPLUS A6013 using Tapatalk
 

 

Posted (edited)

Thanks definitely loving this setup a lot! So, in front of the front wheels, nothing at all as far as rubbing goes. In the rear of the front wheels, I had some and I found the best way to eliminate it was to remove the bracket behind the fender liner and trim the mudflaps. As soon as I did that, full turn forward/reverse over curbs, etc and I've got plenty of room with no rub whatsoever. I'm doing some finishing sanding on the flaps to make them look factory. No crazy angles but next weekend after my alignment, I'll be checking all my torque values once more and I'll snap some pictures.

Edited by ETMC
Misspelling
Posted



Thanks definitely loving this setup a lot! So, in front of the front wheels, nothing at all as far as rubbing goes. In the rear of the front wheels, I had some and I found the best way to eliminate it was to remove the bracket behind the fender liner and trim the mudflaps. As soon as I did that, full turn forward/reverse over curbs, etc and I've got plenty of room with no rub whatsoever. I'm doing some finishing sanding on the flaps to make them look factory. No crazy angles but next weekend after my alignment, I'll be checking all my torque values once more and I'll snap some pictures.


Awesome. Thats not bad at all if all you had to do was remove the bracket and trim the flaps.

Sent from my ONEPLUS A6013 using Tapatalk

Posted

Zone has a 1.75" leveling kit. has anyone bought this kit? I'm thinking this is the lift i will go with.

 

http://zoneoffroad.com/1.75-Leveling-Kit-2019-Chevy-TrailBoss_and_Sierra-AT4/c1171

 

1.75" Leveling Kit

 

Here's some of the information.  

 

  • 3-piece design with top mount spacer and 2 preload spacers to raise ride height without over-extending suspension during droop travel
  • Maintains ride quality and handling characteristics
  • Allows clearance for 33-34" tires
  • Includes Factory Protection Plus

 

Zone Offroad is now offering leveling kits specially designed for the 2019 Chevy Trail Boss and GMC AT4 trucks. Engineered to be more than just a "budget boost", these kits are designed to a higher standard to work within the parameters of the factory suspension and steering geometry to maximize its potential while allowing clearance for larger tires. As with all Zone Offroad lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes Zone Offroad's Limited Lifetime Warranty, ESC system compliance and a 5-year 100,000-mile drivetrain warranty.

Important Notes!

  • 1. Strut compressor required for installation.
  • 2. Will not fit Adaptive Ride Control (ARC) equipped models.
  • 3. Tires wider than 295/ cannot be installed on factory wheels due to clearance issues to the steering knuckles.
  • 4. Welding required to install optional LCA steering stops.
  • 5. Complete 1.75" leveling recommended for AT4, Trail Boss suspension not as raked for the factory so installing without thin preload spacer will net 1-3/8" lift for a level stance.

 

Hope this information helps. 

Posted
On 7/14/2019 at 5:58 PM, Sin City Trail Boss said:

If I remove the rear block on my TB, what do I replace it with to level it with the front?

Smaller block and U Bolts. A show here in town just told me they had another Trail boss do that and it leveled the truck. You'll need smaller U bolts

 

Posted
On 7/14/2019 at 7:10 AM, ETMC said:

Finished everything up. Had to make my appointment for the alignment next Friday due to shipment delays. 1.5 motofab & 35 12.50 18 Ridge Grapplers with 2" Bora spacers. 

CD5300A9-68E5-4486-8FA9-0DA005D4C340.jpeg

B14A6733-8643-4D5C-A0DB-A933D4ED4AB5.jpeg

When you have time, could you please take a couple pics from straight-on front and back? I'd like to see how far the tires stick out from the fenders. Also, in your estimation, do you think you could get by on 1" spacers?

  • Like 1
Posted

^^I hope your going to put flares on that truck, otherwise kiss your paint good-bye. GM's post-2010 paint is not up to the task of beings pelted with rocks and sandblasted daily.

Posted


3583160b43cbb4241525ddd8ee61a7cf.jpg

Here’s my alignment sheet from this morning. Hope it helps.
Please tell me what I'm looking at. This good or bad? I see green..

Sent from my Pixel 3 XL using Tapatalk

  • Like 1
Posted
On 6/10/2019 at 8:10 PM, jtl1985 said:

so what does everyone run for tires with the leveling kit on a trail boss lt? I ordered the understrut kit and prefer to have a little bigger tire. keeping the 18's but do I go 33" or bigger without rubbing issues? I've always had to trim and I really don't want to this time, maybe just he mud flap if I have to.

i run a 33x12.5 on 20s with my trailboss

  • 5 weeks later...
Posted
On 7/15/2019 at 11:47 AM, Bizar said:

Zone has a 1.75" leveling kit. has anyone bought this kit? I'm thinking this is the lift i will go with.

 

http://zoneoffroad.com/1.75-Leveling-Kit-2019-Chevy-TrailBoss_and_Sierra-AT4/c1171

 

1.75" Leveling Kit

 

Here's some of the information.  

 

  • 3-piece design with top mount spacer and 2 preload spacers to raise ride height without over-extending suspension during droop travel
  • Maintains ride quality and handling characteristics
  • Allows clearance for 33-34" tires
  • Includes Factory Protection Plus

 

Zone Offroad is now offering leveling kits specially designed for the 2019 Chevy Trail Boss and GMC AT4 trucks. Engineered to be more than just a "budget boost", these kits are designed to a higher standard to work within the parameters of the factory suspension and steering geometry to maximize its potential while allowing clearance for larger tires. As with all Zone Offroad lift kits, these new kits are backed by Factory Protection Plus for piece of mind wherever your adventures may take you. Factory Protection Plus includes Zone Offroad's Limited Lifetime Warranty, ESC system compliance and a 5-year 100,000-mile drivetrain warranty.

Important Notes!

  • 1. Strut compressor required for installation.
  • 2. Will not fit Adaptive Ride Control (ARC) equipped models.
  • 3. Tires wider than 295/ cannot be installed on factory wheels due to clearance issues to the steering knuckles.
  • 4. Welding required to install optional LCA steering stops.
  • 5. Complete 1.75" leveling recommended for AT4, Trail Boss suspension not as raked for the factory so installing without thin preload spacer will net 1-3/8" lift for a level stance.

 

Hope this information helps. 

I am having this kit installed tomorrow with TOYO MT 295/70R18’s on factory wheels.

  • Like 2
Posted
8 minutes ago, CDub said:

I am having this kit installed tomorrow with TOYO MT 295/70R18’s on factory wheels.

Before installation 

246C165D-F870-43EE-BE97-2719E351F9F1.jpeg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...