Jump to content

Recommended Posts

Posted
15 hours ago, GN2018 said:

Unbelievable.  Time to get to the next level or even one above that.  I would contact GM directly.  There must be some sort of regional manager over all of the dealerships.  I’d demand a truck to drive as they sort their crappy (negligent) work out.  They are obviously not taking this serious.

 

I tried to get a truck from them.   They said they didn't have any.  Asked them to contact a rental agency.  Rental agencies do not have hitches on their trucks due to liability.  At what point is it best to have GM step in?  Now, in the middle of the process or after when everything that went wrong is captured and cataloged?

Posted
2 hours ago, jeepincbum11 said:

 

I tried to get a truck from them.   They said they didn't have any.  Asked them to contact a rental agency.  Rental agencies do not have hitches on their trucks due to liability.  At what point is it best to have GM step in?  Now, in the middle of the process or after when everything that went wrong is captured and cataloged?

Unless I was very comfortable that the dealer was going to get it right, I’d be escalating this now. Given all you’ve been through, I see no reason to believe they will get it right this time.  I’d start by asking the service manager for the contact information of the regional GM rep.  Whatever that person is called is irrelevant, the point is that you’re putting the service manager on notice that you’re escalating this.  I would also find a way to meet with the dealership owner while the truck is still in its current state.  Keep your cool, but let him know that this is very upsetting.  I always like to use the line, “Would you be satisfied if this was your truck?”  Your goal here is to get his personal commitment to fixing it correctly.  Get him to agree to be there to go over it when you pick it up.

 

That they can’t provide you with a loaner truck is hard to believe.  They don’t have a demo or used truck on the lot?  Can’t get one from another dealer as a favor?  Is that costing you money from not being able to do your job/trade properly?

Posted

Wow.  

Someone seriously dropped the ball there.   So the glass company left it like that, or someone that works there? 

 

Posted
21 minutes ago, Pacfanweb said:

Wow.  

Someone seriously dropped the ball there.   So the glass company left it like that, or someone that works there? 

 

I think its a combo of both.  The dealer should have verified the work prior to telling me to come in and pick up the truck.  This is the 3rd time they have not verified the work before having me come pick it up.

Posted
1 hour ago, GN2018 said:

I’d start by asking the service manager for the contact information of the regional GM rep.  Whatever that person is called is irrelevant, the point is that you’re putting the service manager on notice that you’re escalating this.

 

I would also find a way to meet with the dealership owner while the truck is still in its current state.  Keep your cool, but let him know that this is very upsetting.  I always like to use the line, “Would you be satisfied if this was your truck?”  Your goal here is to get his personal commitment to fixing it correctly.  Get him to agree to be there to go over it when you pick it up.

 

That they can’t provide you with a loaner truck is hard to believe.  They don’t have a demo or used truck on the lot?  Can’t get one from another dealer as a favor?  Is that costing you money from not being able to do your job/trade properly?

 

Thanks for the suggestions.

 

1) Should i give the Service manager a chance to fix it and make it right before escalating (or have they had enough chances?) 

 

2) Have to figure out who owns the dealership. Doubt i will get to meet Mr. Hendrick :) but i have a guy who might be able to get me in touch.

 

3) As for the Loaner,  They are blaming it on covid and their 1000's of trucks sitting in farmers fields in Indiana waiting on computer chips.   ( My job does not require me to need a truck)  My towing of toys :) does...

 

Posted

1) He’s had enough chances.

2) They know how to get to the owner.

 

Even if you don’t get to see him, keep asking.  His name is on the sign and by politely but firmly asking to see him it will make it clear how unacceptable this hole situation is.  Just so we’re clear.  I’m not sure if this is the first time you’ve ever been screwed, but you have been.  Stay calm, but demand that this ****** gets fixed properly and quickly.  If they can’t get you a truck, expedite the headliner.  This is bull crap and they need to know you’re not some chump who’s just going to take this.  Just keep saying the quickest, most complete professional fix is what you want and you want to discuss this matter with whoever it takes to get that resolution.

 

Then you start asking what they’re going to do to compensate you for all the aggravation they’ve put you through.  Nothing like a couple oil changes and tire rotations.  One time my dealer gave me three months of XM radio when they screwed up.  And that was just because I bitched about having to wait too long for one of my complementary oil changes.  I had an appointment and they weren’t ready.

 

Again, polite but firm and keep escalating.  Good luck.

Posted

Call and file a complaint with GM Customer Care.  1 (888) 988-7267

  • Thanks 1
Posted
On 5/4/2021 at 10:38 AM, jeepincbum11 said:

 

The SAGA continues.  5th visit...   Took the truck in to fix the issue in the images above.  The glass company who made the mistakes above happen to be in the dealership when i drop it off and they check it out and he shakes his head.  Kinda comical.   So i leave it with them for a week while i am out of town. Get a call this am and  It's all completed and ready to go.  I'm like "Great,  need it this weekend for towing".   Hands me my keys.  Walks me out and i see the bed cover is still open.  So i hop up to check it out and the seam is even again.   I notice glue all over the place.  So i have the service guy hop up and he shakes his head.  Tries to clean it.  While he is cleaning it the spoiler rocks back and forth and is moving like its not tightened down.   So hes like ughhhh.  Asked me what i want to do.  I'm like i want this repaired the way it should be.  But i need a truck this weekend.  He said, take the truck.  bring it back and we will get it taken care of.  So, i open the door to get in and i cant see out the back window.  As he walks away, i called him back over and asked what was going here? Leave the truck with me he says and back home i go without the truck.  Next call is to talk to the service manager.  We will see where it goes from there.

 

 

truck7.jpg

truck1.jpg

truck2.jpg

truck6.jpg

 

This is totally unacceptable!! Wtf, they need to overhaul their service department. What is the name of the dealership? Or at least what area its in. Could potentially help other owners in this forum avoid them in the future for this type of warranty work.

Posted
1 hour ago, Vtecluder617 said:

 

This is totally unacceptable!! Wtf, they need to overhaul their service department. What is the name of the dealership? Or at least what area its in. Could potentially help other owners in this forum avoid them in the future for this type of warranty work.

Hendrick GMC in the Raleigh NC area

  • Like 1
Posted

If you want to get them moving, create a separate post detailing the attempts at repair and this terrible outcome.   Put it in a google review of the dealership, throw it on every Silverado/Sierra forum you can find, and send it to the Service Department manager and General Manager of the dealership.  Squeaky wheels get the grease, and public image is everything to a car dealer.

Posted

Just got a call from the dealership.   Rear window has been removed,  Headliner is out (via the rear window).  This explains the airbag alert i received. I am being told the headliner is expected to arrive next Monday or Tuesday.   Then the headliner needs to go back in.  They are going to attempt to send the headliner in through the back glass hole before the rear glass gets re-installed.  Re-install the rear glass.  Wash it to verify it doesn't leak and then we go from there. 

alert.png

Posted

Going thru the rear glass for the headliner is going need some real care and expertise without damaging it.  Be sure to check everything including all the plastic trim pieces (as some installers seem to scratch them badly) when you go to pick it up.

Posted (edited)
2 hours ago, jeepincbum11 said:

Hendrick GMC in the Raleigh NC area

 

Oh yeah, Rick Hendrick. He's got a bunch of dealerships around me in Metro ATL. Almost bought my Trail Boss from their Chevy dealership down here. Surprised at the type of service you received. His automotive group is a juggernaut in the industry. 

Edited by Vtecluder617
Posted
2 hours ago, jeepincbum11 said:

Hendrick GMC in the Raleigh NC area

That's where I live. 
Wonder who they use for glass work?   

Is is the Southpoint store or the one on 64?

Posted
12 minutes ago, Pacfanweb said:

That's where I live. 
Wonder who they use for glass work?   

Is is the Southpoint store or the one on 64?

64

I want to say glass solutions but do not quote me on that.  I overheard it in passing but not sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,949
    Total Members
    8,960
    Most Online
    Gkistler
    Newest Member
    Gkistler
    Joined
  • Who's Online   4 Members, 0 Anonymous, 877 Guests (See full list)


  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...