Jump to content

Recommended Posts

Posted
On 4/2/2021 at 11:49 AM, SigPig94 said:

Just spoke with the service manager again......anything other than a sliding rear window is apparently NOT an option (said electrical problems would be a certainty.....??)....so new slider it is.  He also said that the replacement window they’ll be installing next week has a “new part #” so it’s possible that a new repair approach is in effect..... 🤔.  Uhhh...hooray???  The dance continues.......  

 

I don't think you would have any electrical problems. The sliders in these trucks are different from previous years. The motor and gearbox that opens and closes the window will separate now. Meaning they can leave the motor hooked up to the wires but, it won't do anything. I had my window replaced about a month ago. The glass guy came to the house and did the work. Here is the process....

 

Posted
9 minutes ago, 2016 Sierra Owner said:

I don't think you would have any electrical problems. The sliders in these trucks are different from previous years. The motor and gearbox that opens and closes the window will separate now. Meaning they can leave the motor hooked up to the wires but, it won't do anything. I had my window replaced about a month ago. The glass guy came to the house and did the work. Here is the process....

 

Thank you for that.....I saw it earlier when I started reading this string and it is VERY informative....your pics REALLY assist in the understanding of the issue.  I certainly hope this process fixed your water woes......and thanks to great posts like yours I’ll be asking specific questions when I bring my truck in for the window replacement next week. 🍻

Posted
7 hours ago, GN2018 said:

Did you swap out the window before it even leaked?  If so, were you not able to order it that way?

 

Main question - how much did it cost?  I’m planning on waiting until I have a leak, but there are times when you do what you gotta do and I might just pay for it myself.  It’s hard to know, but a lot of this seems like a workmanship issue in both the original install and then the subsequent fix that seems often to not work.

I did the swap all on my own. Never gave the window a chance to leak. With getting a cap I wasn’t dealing with moving that to deal with the window. The glass guy had a good reputation and not a scratch or sealant mark anywhere. I ordered my truck and you can’t delete the sliding window. It was close to $700 with a GM solid window. A few of the chain places can do it for under $500. I went with the local guy who does most of the car dealers so he had the experience. 

  • Thanks 1
Posted

Wow, quite the sacrifice.  I don’t use my sliding window, but I thought if I had a cap I would actually use it then.  Thanks for the info.  I’d pay $700 not to have to deal with the leak even though I’d be upset with GM.  Still better than the aggravation.

Posted
5 hours ago, SigPig94 said:

This is precisely what I thought...to the point where i have already been contacting local auto glass shops.  A couple have actually told me they “won’t touch” my issue because it’s a brand new vehicle and still in the warranty period......????.......why exactly an after-market shop would care about that is beyond me......I, the owner, assume all responsibility for what’s done to my truck so add that to my list of things to scratch my head over.  
I’m gonna see how the replacement slider process goes in a few days at the dealership .......but I will DEFINITELY continue looking for a local window shop that I feel can fix this specific issue forever with a one-piece, non -slider installation.....I honestly feel that’s the only thing that’s gonna work.  Hope I’m wrong.

The place I used thought it was extreme and suggested just resealing the slider early on. He does work with a local GMC dealer and got a solid factory window from them. In the end he said it’s your money and was confident in his work on a truck with under 300 miles. I think most shops are intimidated by removing the interior trim pieces and seat back. 

Posted
25 minutes ago, GN2018 said:

Wow, quite the sacrifice.  I don’t use my sliding window, but I thought if I had a cap I would actually use it then.  Thanks for the info.  I’d pay $700 not to have to deal with the leak even though I’d be upset with GM.  Still better than the aggravation.

With the time of removing the cap and reinstalling it. Plus the wait time of getting into the dealer. Dealers glass guy is careless. It all added up to time is money. In addition to knowing the reputation of the guy I used help with the choice.  

Posted
Mine either

Sent from my SM-A505U using Tapatalk

Might make a great train horn button if you go solid rear window. Just saying,.... [emoji38]

Sent from my SM-N960U using Tapatalk

  • Like 1
  • Thanks 1
Posted
On 3/23/2021 at 9:27 AM, lebag335 said:

What did you get in its place?

2020 F250

  • Like 1
Posted

I think those that have had it actually fixed you can see a clear difference in the way certain dealerships attack this problem. Most who have had a second hand glass company come and perform this fix have had good success which is no shocker here. Some dealerships have techs that care about the work they do, and some clearly are just collecting a paycheck and doing the bare minimal.

 

That guy a few pages back with what looks to me to be bathroom sealant white goop, is clear that it was done at a piss poor dealership service department. I think the people who just said f it and bought a non slider glass window are the smart ones here, time is money and going back to the dealership 3 times for this issue is not worth the hassle, 500-700 dollars is short money to get a non leaking truck imo. And yes i think gm should be fixing this issue but clearly now a year away from a major redesign that is never going to happen.

Posted
I think those that have had it actually fixed you can see a clear difference in the way certain dealerships attack this problem. Most who have had a second hand glass company come and perform this fix have had good success which is no shocker here. Some dealerships have techs that care about the work they do, and some clearly are just collecting a paycheck and doing the bare minimal.

 

That guy a few pages back with what looks to me to be bathroom sealant white goop, is clear that it was done at a piss poor dealership service department. I think the people who just said f it and bought a non slider glass window are the smart ones here, time is money and going back to the dealership 3 times for this issue is not worth the hassle, 500-700 dollars is short money to get a non leaking truck imo. And yes i think gm should be fixing this issue but clearly now a year away from a major redesign that is never going to happen.

It's not a major redesign. That's not how GM operates. It's a mild refresh, most likely just the front bumper and grille. Everybody hoping for a magic rear window fix will likely be disappointed. We should all be sure to be inviting and welcoming when the 22+ trucks start posting about their leaky rear window.

 

Sent from my SM-N960U using Tapatalk

 

 

 

Posted (edited)

Add me to the list. 18k miles.  Sealant attempted.  Failed.   Going back in for new window.  Mexico truck for anyone still tallying the results.

 

What i find hysterical is that they did a multi point inspection and did not provide me with results as stated on the document.

 

 

truck.jpg

truck1.jpg

Edited by jeepincbum11
Posted
On 11/29/2018 at 8:13 PM, JKD said:

Update: Has been 18 days at the dealership and still not fixed. Removed and resealed the rear window only to find out today that the whole window needs to be replaced now because it’s leaking at the sliding window top rail even though it was confirmed by the dealer that the window seal itself was leaking due to poor job by factory in applying sealant. May be another two weeks to get the window from the factory. Then they have to take the windshield out in order to replace the headliner. Doubt I buy another GM after this one. Don’t what I’d get into because it seems automotive quality is degrading to the level of the 1980’s again. 

Hello sir. I wanted to check in and see long term what ended up happening with your window. I just bought a 2020 GMC and it’s already leaking. I am trying to find out if anyone has had any luck with fixing this issue long term. Thanks!

Posted

My 2019 Chevy RST with 24k back window started leaking last week. I called dealer and scheduled an appointment for this past Wednesday. The dealer had a window leak company do the work. I got the truck back the same day and you can't even tell they worked on it. No scratches, marks or sealant anywhere. It has rained the last two days and no leaks. Hopefully it's fixed permanently, but only time will tell.

 

 

Posted
My 2019 Chevy RST with 24k back window started leaking last week. I called dealer and scheduled an appointment for this past Wednesday. The dealer had a window leak company do the work. I got the truck back the same day and you can't even tell they worked on it. No scratches, marks or sealant anywhere. It has rained the last two days and no leaks. Hopefully it's fixed permanently, but only time will tell.
 
 

My 19 AT4 goes in this Friday. I can only hope for that level of service. Fingers crossed.


Sent from my iPad using Tapatalk
Posted
8 hours ago, Raymond378 said:

My 2019 Chevy RST with 24k back window started leaking last week. I called dealer and scheduled an appointment for this past Wednesday. The dealer had a window leak company do the work. I got the truck back the same day and you can't even tell they worked on it. No scratches, marks or sealant anywhere. It has rained the last two days and no leaks. Hopefully it's fixed permanently, but only time will tell.

 

 

On the quality of the work do you know if it was a small mom and pop place or a chain place doing the work? I believe the odds increase if it’s a mom and pop place doing the work. Even if the slider does leak again just the fact of no scratches, marks, sealant anywhere shows quality work. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • In most areas of the country, wages have trailed CPI increases over time (let's say, since the 70's) and things like housing, energy, and food have vastly outpaced wages on the whole. Can't ignore that, it's very real.   That isn't to say there aren't ways to live in ways that mitigate some of that, including moving to cheaper areas of the country. In KNut's neck of the world, median housing prices in "nearby" Dallas are more like $500k. If you're raising a family and young in a successful career, your economic opportunities are probably going to be better living closer to Dallas than Cornhole. A 3 hour (6+ round trip) daily commute probably isn't tolerable for most folks. Grumpy mentioned economic migration; but we've seen what happens when people populate and grow an area. It becomes more expensive when economic opportunities come to roost.   One thing different now from back in the 70's is our quality and standard of living has changed. Healthcare is light years better, for example. But it's also much more expensive. And we have communication and information/tech tools that folks in the 70's could never imagine, and they're accessible to people of just about all incomes. Cars are light years safer, faster, and filled with tech advances. Homes are larger, more energy-efficient, and more luxurious on the whole, from starter homes to luxury homes.   Seattle was once affordable. My folks came here in the 70's with a lot of other people from California looking to escape uncontrolled sprawl, smog, and rising prices in the Bay Area. Seattle and the surrounding area has grown considerably; The home they bought for, I think it was $70k or $80k in the late 70's is now worth $1.2M today. The same house.   So while there have been obvious boosts in some areas of quality and standard of living, regarding opportunity, that's a bit more nuanced. It's really not possible for young people to get started in similar situations in areas of the country that have become "HCOL" (high cost of living). There are many more areas than before, which is to say they exclude younger workers or make their lives significantly harder. They have to commute farther and longer to afford to live in the area. They have to take outsized risk, take on more debt, significantly delay family planning. Or, they could move somewhere cheaper, but there's usually a loss of economic opportunity that comes with that. Even for the same job, it may pay a lot less in a LCOL.   What I don't like are Boomers with phones thinking they have all the answers and outright saying that if people stopped paying for their cell phone that they'd be rich. It's as stupid and misguided as people who think they'd only be rich if taxes weren't so high. Sorry guys, Elon proved you wrong on that one, I guess you're just lazy and blaming your own situation for the reason you're not wealthy. Mobile communication is basically an expectation in a modern society and workforce and it's often cheaper than having a copper landline these days, so... What's your point?
    • My 2008 started exhibiting similar symptoms, wasn't 'cold' enough. I went through a pretty extensive diagnostic process for a DIY'er with limited OBD access. System evacuation and recharge included.   Noticed one day the passenger side was cold (I'm never over there so took awhile to notice).   Pulled the drivers side blend door actuator out, disassembled it and cleaned it out. Put it back in and did some kind of reset and it fixed the problem.   Long story short, it wasn't the A/C system at fault, the blend door wasn't moving to full cold position. 
    • Just got in two back to back road trips of about 700 miles each with my new 2026 2500HD trail boss.  Really nice highway cruiser. Two very different trips - both loaded with gear for my band. First trip was to Durango for an event with Indian Motorcycle - saw some really nice bikes while out there! All mountain driving on back country highways - very pretty scenery - lots of hills along the way including a crazy pass that went up to 11,000 feet! Overall MPG for that trip was 15, speeds were typically 60-70 range depending on road.   This past weekend was into rural Nebraska, so mostly fast interstate (76 and 80) with some fast 2 lane getting to / from the final destination outside of North Platt. Speeds mostly ~80.  Also mostly flat although somehow dropped from 5K to 3K feet and then back up getting back into CO - didn't really notice it was subtle probably over a long distance. Overall MPG for the trip was 14.   Truck is still barely broken in - just got past 2K miles on the second trip. We survived some torrential thunderstorms in NE on Sat. night - especially driving to the hotel after the gig at 1AM.  Truck didn't skip a beat - I think the weight of these HD trucks really reduces the hydroplane chances.   All good - made it back to Denver area mid day on Sunday for fathers day.   I did a quick calculation to compare MPG and overall trip cost to my previous truck, a 2018 Colorado V6.  From previous experience I would have expected to see a 4mpg improvement on both trips.  Based on current gas prices which are starting to come down but still $0.75 to $1 higher than they should be based on barrel pricing, each trip was about $40 more.  Really not much of a concern in the grand scheme of things I must say.  
    • Thank you very much for this info. I will start looking for a 5.3L. I have viewed several Youtube video and get so confuse. You are the first person to give good advice.  Thanks again, John  
    • ?   What exactly is your question?  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...