Jump to content

Recommended Posts

Posted
On 2/10/2020 at 5:54 PM, TheTicketTX said:

Mine only slightly rub at full lock when reversing. Everything else is smooth with no rub at all. I run this setup...

 

Toyo Open Country M/Ts 285/75R17

Method MR312 17x9
ReadyLIFT “1.75 Level Kit with UCAs for Trail Boss / AT4

 

 

DA9AA767-09A5-47BC-B665-CD1A465CFE76.jpeg

Looks great! Any impact to performance with the bigger/heavier tires?

Posted
7 hours ago, beefin06 said:

Looks great! Any impact to performance with the bigger/heavier tires?

Mpg went down a tad, other than that.. nothing!

Posted
19 minutes ago, TheTicketTX said:

Mpg went down a tad, other than that.. nothing!

Good to hear. Do you have the 3.23 or 3.42 rear end?

  • 3 weeks later...
  • 1 month later...
Posted
On 7/11/2019 at 2:10 PM, Dalemouse said:

fe8745fadbd639b2ef87650488f8217b.jpg85a6aa025e2b3cd3630c64faeb0ebae5.jpg0bf9adc82b43f39585ec363dd95be4da.jpg

My friend just put 35x12.50R18 BFG KO2 (34.50x12.50R20) tires on her stock 18” wheels with no lift or leveling kit yet with very little to no tire rub.

18d0041a1056e69f354704948403efc8.jpg3c036b305be5828332c0ec7fe84e567d.jpge102db97f0d551e44023a65a0fa26558.jpg

I just put 285/65R20 BFG KO2 (34.50x11.50R20) tires on my stock 20” wheels with no lift or leveling kit yet with very little to no tire rub.


Sent from my iPhone using Tapatalk

I know this treads a few months old but hoping you see this and reply! 

 

For your friend who put the 35x12.5x18s on her truck stock. Can you explain what a little to no rub is? Are we talking rubbing when turning full lock? Or just in reverse full lock? Just curious. I can deal with it in reverse only but prefer not to rub with going forward. 

  • Like 2
  • 3 weeks later...
  • 3 weeks later...
Posted

 

On 6/17/2020 at 6:31 PM, RedHoodTrailBoss said:

On a stock Trail Boss, no level and stock rims would a LT295/70r18 fit with no rub? If so which tires have been tested?

295/70/18 Stock Wheels Nitto G2 Grapplers. No rubbing and drive better than the Goodyear stock tires. I do have a Rancho Leveling kit, but the tires were put on and run for at least a week before I had the kit installed. Either way, perfect without any problems.

IMG_7833 (2).JPG

  • Like 1
Posted
 
295/70/18 Stock Wheels Nitto G2 Grapplers. No rubbing and drive better than the Goodyear stock tires. I do have a Rancho Leveling kit, but the tires were put on and run for at least a week before I had the kit installed. Either way, perfect without any problems.
162262615_IMG_7833(2).thumb.JPG.5782bc573df8062a819cb5745329e12e.JPG

Is that pic before or after the kit? Also, what type is the Rancho leveling kit and how big is it? All I’m finding are the kits for non Trail Boss models


Sent from my iPhone using Tapatalk
Posted
2 hours ago, RadoPhan said:


Is that pic before or after the kit? Also, what type is the Rancho leveling kit and how big is it? All I’m finding are the kits for non Trail Boss models


Sent from my iPhone using Tapatalk

That is the picture after the leveling kit and tires were put on. Whoops on the Rancho. I meant Rough Country. Sorry. It is a 1.5 level. Here is the link: https://www.americantrucks.com/rough-country-silverado1500-150-inch-leveling-lift-kit-1321.html?utm_content=AT Lift Kits - Leveling Kits and Body Lifts|Rough Country&T5_Var4=S114086&utm_campaign=ATS+Silverado+Brand+%26+Vehicle+Low&dialogtech=ppc&utm_source=bing&utm_medium=shopping&T5_Var2=shopping&T5_Var3=red&msclkid=e7bc51f603d714af4d340ef448d401d2&utm_term=4577816664592493&gclid=CI6D2u-Lt-oCFV2rxQId0O8CXw&gclsrc=ds

  • Like 1
Posted
On 10/21/2019 at 10:57 AM, xAISxCR34M said:

I was able to fit 295/70r18 Nitto Ridge Grapplers on the stock wheels. No rubbing what’s so over. They fit perfectly.

53B03928-46A3-4406-A410-8543368CFE5F.jpeg

8D8D4D01-4CE2-43B9-9F22-32D325B5333C.jpeg

4A49E6F9-7703-4E95-988C-CE2869BBBF06.jpeg

29103420-3BAC-45EA-9336-B51A9447BB4B.jpeg

 I want the same tire but I was told that the tire is heavy and it would ride rough. How does it ride? Thanks

  • 2 weeks later...
Posted

295/70/R18 Falkens on stock rims and stock height. Decided on Falkens since they were buy 3 get 1 free and had good reviews. I kept reading on other threads about stock UCAs failing on level kits so I think I’ll hold off for now even though the front has a rake. 01d1f0ddd7678910013613364d3ad13c.jpg


Sent from my iPhone using Tapatalk

  • Like 1
Posted
5 hours ago, RadoPhan said:

295/70/R18 Falkens on stock rims and stock height. Decided on Falkens since they were buy 3 get 1 free and had good reviews. I kept reading on other threads about stock UCAs failing on level kits so I think I’ll hold off for now even though the front has a rake. 01d1f0ddd7678910013613364d3ad13c.jpg


Sent from my iPhone using Tapatalk

Is there any rubbing? Do you have any pics at full lock inside wheel well? it looks good!

Posted

Factory Trail Boss suspension.

1.25" BORA spacers.

35x12.5 BFG KO2s.

Removed mud/aero flaps. Removed front wheel well brackets. Pinned back front wheel well liners with self tapping screws.

Almost no rub. Tire kisses felt liner at full lock.

Thanks to @Ryguy and everybody else who posted on the forum.

20200702_222443.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...