Jump to content

Recommended Posts

Posted

I just saw this and don't know when it was posted but did you get a trade? I would like to trade. Let me know.

Posted

If you guys have red ones. Let me know I'll take then.

Sent from my SM-N975U using Tapatalk

Posted
On 10/18/2020 at 12:56 AM, Andyh1 said:

If you guys have red ones. Let me know I'll take then.

Sent from my SM-N975U using Tapatalk
 

I have the red ones I just pulled off my TrailBoss. 

 

Installed shackles which I personally like way better. 

 

IMG_5308.thumb.JPEG.1a217659efa6e02f3bf95fd3eb455b75.JPEG

Posted
I have the red ones I just pulled off my TrailBoss. 
 
Installed shackles which I personally like way better. 
 
IMG_5308.thumb.JPEG.1a217659efa6e02f3bf95fd3eb455b75.JPEG
I don't think the Silverados will work on the Sierras... Someone correct me if I'm wrong

Sent from my SM-N975U using Tapatalk

Posted
I wasn't sure of that either. I have read conflicting information on that. 
The ones on my sierra are mounted vertically... Are yours the same or horizontally?

Sent from my SM-N975U using Tapatalk

Posted
20 hours ago, childstoys said:

I have the red ones I just pulled off my TrailBoss. 

 

Installed shackles which I personally like way better. 

 

IMG_5308.thumb.JPEG.1a217659efa6e02f3bf95fd3eb455b75.JPEG

where did you get the shackles - for your Chevy ?? Looks good

Posted (edited)
1 hour ago, slj2008 said:

where did you get the shackles - for your Chevy ?? Looks good

https://www.americantrucks.com/rough-country-silverado1500-tow-hook-to-shackle-conversion-kit-rs147.html

 

Picked up a set of black shackles on Amazon for $20 and they fit perfectly. Install was 15 minutes. Shackles are great when actually pulling stuff with your truck and a tow strap. 

 

As a tip... Use a piece of cardboard or something under the shackle braces when sliding them in place. This will prevent them digging into the plastic under them when getting lined up. Luckily I noticed this before anything went sideways. 

 

Also put some black zip ties on the shackle bolts to prevent them from creeping out or some 8 year old kid from taking them off in a parking lot. 

Edited by childstoys
Posted
17 hours ago, Andyh1 said:

The ones on my sierra are mounted vertically... Are yours the same or horizontally?

Sent from my SM-N975U using Tapatalk
 

Horizontal... I thought the frames were the same though??? Should fit regardless no? 

Posted
On 10/19/2020 at 12:35 PM, childstoys said:

I have the red ones I just pulled off my TrailBoss. 

 

Installed shackles which I personally like way better. 

 

IMG_5308.thumb.JPEG.1a217659efa6e02f3bf95fd3eb455b75.JPEG

Im interested if you still have the red tow hooks

Posted
On 10/20/2020 at 9:46 AM, childstoys said:

https://www.americantrucks.com/rough-country-silverado1500-tow-hook-to-shackle-conversion-kit-rs147.html

 

Picked up a set of black shackles on Amazon for $20 and they fit perfectly. Install was 15 minutes. Shackles are great when actually pulling stuff with your truck and a tow strap. 

 

As a tip... Use a piece of cardboard or something under the shackle braces when sliding them in place. This will prevent them digging into the plastic under them when getting lined up. Luckily I noticed this before anything went sideways. 

 

Also put some black zip ties on the shackle bolts to prevent them from creeping out or some 8 year old kid from taking them off in a parking lot. 

when you took off your tow hooks , any problems ?? my 2015 i had to cut of the bolt ( put in backwards ).

Posted
8 hours ago, slj2008 said:

when you took off your tow hooks , any problems ?? my 2015 i had to cut of the bolt ( put in backwards ).

No issues here. Truck is only a month old. Everything is still fresh underneath. 

Posted
The ones on my sierra are mounted vertically... Are yours the same or horizontally?

 

Sent from my SM-N975U using Tapatalk

 

No they aren’t. The tow loop is vertical, but the mounts are horizontal. The loop turns 90 degrees. Check your mounts they will be horizontal where they bolt on.

 

You’ll have to get under the bumper to see it, it’s behind that little rubber boot thing.

 

22086a7e64c948326f43aff95af1dde8.jpg

4929cfcb17900d7474adaf5f178c8bbe.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted (edited)
On 10/17/2020 at 11:56 PM, Andyh1 said:

If you guys have red ones. Let me know I'll take then.

Sent from my SM-N975U using Tapatalk
 

I have some red ones I pulled off to put an aftermarket bumper on that I would sell. These are the real thing not some aftermarket version. 

F800DCCE-87D1-44C1-B243-367E581F583A.jpeg

A2742C96-0F4C-432D-84BB-C889C8FB015F.jpeg

Edited by TXguy
  • Like 1
  • 3 weeks later...
Posted
https://www.americantrucks.com/rough-country-silverado1500-tow-hook-to-shackle-conversion-kit-rs147.html
 
Picked up a set of black shackles on Amazon for $20 and they fit perfectly. Install was 15 minutes. Shackles are great when actually pulling stuff with your truck and a tow strap. 
 
As a tip... Use a piece of cardboard or something under the shackle braces when sliding them in place. This will prevent them digging into the plastic under them when getting lined up. Luckily I noticed this before anything went sideways. 
 
Also put some black zip ties on the shackle bolts to prevent them from creeping out or some 8 year old kid from taking them off in a parking lot. 

Which shackles did you order?


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Having owned 4wd vehicle since the 1970s I find there are varying opinions on how to use 4wd, every owner is an expert in their minds.  IMO, 4LO is the appropriate gear and what I would use,  You have to feather the gas to avoid spinning tires and the lower the gear the better chance.  But like I said you will find those that think their method is best.  I live near a boat launch.  Yesterday there was a new Ford Maverick pulling out a pontoon boat almost 2x its size, they had no problems and they don't have a LO range.   True story. One winter day not long ago I was coming out of small town post office and there was a F150 4wd parked in front and was stuck foot deep snow ruts. I knew the lady so I asked her to put it in 4wd (wondering why in the middle of a 2-day snow storm she wasn't).  Her reply surprised me, "my husband" (the expert) told me not use that because it uses too much gas. She finally got unstuck spinning in 2wd which likely used more gas than not.  
    • Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...