Jump to content

Recommended Posts

Posted (edited)

Here's my build

 

spacer.png

 

spacer.png

 

Specs:

  • 18x8.5 +0 Black Rhino Chase Rotary Forged in Brushed Gunmetal
  • 295/70/18 Falken Wildpeak AT3
  • ReadyLift 1.75" Level Lift

 

Very minor rubbing resolved with minor trimming. I created a post on our site of the trimming requirements for those looking to go with a larger set up on the AT4: https://wheelsasap.com/gmc-at4-oversized-tire-trimming-guide/

 

 

Edited by WheelsASAP.com
grammar
  • Like 7
  • Thanks 1
Posted
On 3/30/2020 at 3:40 AM, Trevor Munsell said:

285 45 22s on oem replicas. I went the budget route to get me into some 22s. Now im wanting to upgrade for a little more sidewall to either 275 50 or 305 45s. What y'all think?

20200323_152207.jpg

Can you give some info on your wheels? Brand, spacers if any, website?

Posted

Custom Offsets. 4play cv43 gloss black. 3/8"hubcentric spacers added to order for $63. Ride great..no vibration. Got for unbelievable price. 

Posted
On 5/2/2020 at 10:24 AM, WheelsASAP.com said:

Specs:

  • 18x8.5 +0 Black Rhino Chase Rotary Forged in Brushed Gunmetal
  • 295/70/18 Falken Wildpeak AT3
  • ReadyLift 1.75" Level Lift

 

Very minor rubbing resolved with minor trimming. I created a post on our site of the trimming requirements for those looking to go with a larger set up on the AT4: https://wheelsasap.com/gmc-at4-oversized-tire-trimming-guide/

 

 

Thanks for this - great resource!!! 

  • Like 1
Posted
40 minutes ago, Supercup said:

Thanks for this - great resource!!! 

Anytime my friend! Feel free to PM me with any questions you may have.

Posted
On 4/22/2020 at 8:08 AM, loud_pipes said:

ReadyLift SST, Atturo Blade XT 305/55/20 (33x12.5), Moto Metal MO970 20x10 with 0 offset

991e784d7dd1d263ba13ce3d27a5bd14.plist118874e57086df09a6a99311aa0877b5.plist991e784d7dd1d263ba13ce3d27a5bd14.plist


Sent from my iPad using Tapatalk Pro

Did you need to use spacers for the wheels?  Looks great.

Posted

Mine is a 2020 Custom 4x4 with 5.3L (NOT a trail boss)


35x12.5x20 Atturo Trail Blade X/Ts (Measure out to 34.92” and 12.52”)

 

2.25” Pro Comp level up front (actually sitting .75” nose High at the moment so getting a 1” Rear block put on soon).

 

No spacers. No trimming. No rubbing (although to be fair, I deleted the rock/mud guards as soon as I got her) 

6BBC3DEE-65CF-4C81-975E-C662F3399121.jpeg

  • Like 2
Posted

Mines a 2019 Silverado RST 

I went with a 3" Superlift

Wheels are a 20x10 -18mm Fuel Rebel wrapped in a 285/60r20 Nitto Ridge Grappler

That comes out to be a 33.7" Wheel setup 

 

IMG_1920 copy.jpg

  • Like 7
Posted
On 5/9/2020 at 9:50 AM, Trevor Munsell said:

Custom Offsets. 4play cv43 gloss black. 3/8"hubcentric spacers added to order for $63. Ride great..no vibration. Got for unbelievable price. 

Hey thanks for the info! I got a couple more questions tho?. Did you need the spacers to clear the calipers or just for the look. Were the factory wheels studs long enough to take the spacer and the wheels no problem?  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,897
    Total Members
    8,960
    Most Online
    ncleg
    Newest Member
    ncleg
    Joined
  • Who's Online   4 Members, 0 Anonymous, 803 Guests (See full list)


  • Latest Articles

  • Posts

    • I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...