Post your T1 wheel/tire setup

[Tboykin51]

Have a 2020 1500 RST. Stock suspension. Looking at putting a 3.5” - 4” kit on the truck.. want to run an aggressive looking 35” tire on stock 20” wheels but don’t want serious rub.. anyone running a similar setup? Any pictures out there? 

[diambo4life]

I installed these awhile ago but this is my 5.3 Elevation. It is levelled (in the rear). 20x9 Fuel Rebels on 33" Kendas. 

Edited June 9, 2021 by diambo4life

[diambo4life]

[puppykat33]

Here is my setup

Fuel Vapor 20x10 -19mm offset

Nitto Ridge Grapplers in 275/65/20

I put on ready-lift 2inch leveling kit

did a mudflap bracket delete with trimming the innermost portion of the flap and zip tied the liner in one spot.

No rub at all

 

[PureZ71]

Replaced my stock 18's with 2' spacers for a set of Fuel Block D751 (18X9, -12 offset). I believe this offset is just the perfect amount for these trucks.

 

http://www.fueloffroad.com/wheel/14570/fuel-1-piece-wheels-block-d751/?finishID=4434&lugs=6

 

 

[cseaman]

BC Forged TD01

18x9, -15

Cooper Discoverer AT3 XLT

295/70

 

Stock height in the garage pic, RL 2" SST in the driveway.

 

https://i.imgur.com/uDZUDVi.jpg?1

 

https://i.imgur.com/vSbtyq6.jpg?1

 

Edited June 22, 2021 by cseaman

[cseaman]

[Trevor Towers]

Used this forum to pick out my specific wheel and tire set up so I’m returning the favor!

 

20” Vossen HF6-4s 20x9.5- +15 offset.

275/60R20 Falken Wildpeak AT3W.

 

it has a 3” Superlift lift kit. The tire size is same as stock on the stock 20” OEM wheels. There is zero rubbing at full turn. This setup gives a similar look to a leveled AT4. 
 

Edited July 1, 2021 by Trevor Towers
Adjust wheel specifications listed erroneously.

[PandonSF]

14 hours ago, Trevor Towers said:

Used this forum to pick out my specific wheel and tire set up so I’m returning the favor!

 

20” Vossen HF6-4s 20x9 - 0 offset.

275/60R20 Falken Wildpeak AT3W.

 

it has a 3” Superlift lift kit. The tire size is same as stock on the stock 20” OEM wheels. There is zero rubbing at full turn. This setup gives a similar look to a leveled AT4. 
 

Looks great! Do you happen to have a photo down the side showing how much poke there is? 

[Trev Towers]

10 hours ago, PandonSF said:

Looks great! Do you happen to have a photo down the side showing how much poke there is? 

I do. It should be somewhere around 1” of poke over factory. Also added a picture of the clearance at full lock. I wasn’t interested in going any bigger than the stock tire sizing because I didn’t want to impact fuel economy too much with weight, overall I believe the new setup is just a touch lighter. 

[PandonSF]

2 hours ago, Trev Towers said:

I do. It should be somewhere around 1” of poke over factory. Also added a picture of the clearance at full lock. I wasn’t interested in going any bigger than the stock tire sizing because I didn’t want to impact fuel economy too much with weight, overall I believe the new setup is just a touch lighter. 

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.

[Trevor Towers]

13 minutes ago, PandonSF said:

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.

Vossen has a custom sizing program, you can get them in configurations from 8.5” - 12” wide and offsets from 0 - +48mm. But I just double checked my receipt, it says 20x9.5in +15mm offset. I called the sales person to confirm because he was telling me 0 offset over the phone previously, I think he was just mistaken. He said that the 20x9.5 +15 is the STANDARD size for these. I’ll update my post. What kind of tires are you going to fit on your vehicle? 

[Trevor Towers]

30 minutes ago, PandonSF said:

Thanks, that looks good. I actually had ordered these wheels a few days ago but in a +15 offset and 9.5” wide. Didn’t realize they had the other offset and widths available.

Here are some more pictures for you as well. I included an image of my city MPG in just normal driving to show I can still maintain essentially the same MPG I was getting before. All city driving.
 

 

 

[PandonSF]

37 minutes ago, Trevor Towers said:

Vossen has a custom sizing program, you can get them in configurations from 8.5” - 12” wide and offsets from 0 - +48mm. But I just double checked my receipt, it says 20x9.5in +15mm offset. I called the sales person to confirm because he was telling me 0 offset over the phone previously, I think he was just mistaken. He said that the 20x9.5 +15 is the STANDARD size for these. I’ll update my post. What kind of tires are you going to fit on your vehicle? 

Oh nice, thanks! I have some Toyo open country at3 275/60r20 im going to put on them. 

[BowtieBill]

Here is mine.

2020 Silverado LTZ Z71 4WD

Bilstein 6112's in front, 2" level

Bilstein 5160's rear with 1" block

Fuel Sledge 20x9, +19mm, ceramic coated

Toyo A/T III, 285/60/20

No rub. Tires stick out past fender by about 5/8". Very happy how it came out.