Jump to content

Won't start ?

B.R.67

By B.R.67
in Troubleshooting, Warranty & Recalls

 Share

Recommended Posts

IOA New Member

IOA

Posted
Posted (edited)

Add me to this list too. I love how this truck looks and was having a hard time finding one in my area so I bought it used. It's a 2020 Custom Trail Boss and I got it with 8,000 miles. The first time the truck did not start was when I took it off-roading. Literally the worst place for this to happen. No service and no one around. After about 30 minutes the truck finally started. My initial thoughts on why it may have happened is because I was parked on a slope with little gas. I brushed this one off since the truck ended up starting anyway.

 

Fast forward a month and the same exact thing happens but this time I was in a grocery store parking lot with about 3/4 tank. At this point I knew there was something faulty with the truck. I called a local tow company and as soon as the guy arrived my truck starts up. The tow truck driver told me he has been seeing this type of issue on new trucks and did mention GM vehicles.

 

I love this truck and would like to keep it but it would be unfortunate if this were to happen during an emergency. That reason alone will make me want to get rid of it. I scheduled an appointment with my local dealership and will update once I hear what they have to say.

 

I should have gotten a Tundra. GM might be the new Ford lol.

 

 

*******Update********

3/14/2021

 

Dealership completely took care of this and haven't had an issue for several months. I forgot exactly what they said but it was something along the lines of a software update that was needed. I'm glad this worked because this is a beautiful truck and would have been sad to settle for anything else.

Edited by IOA
Update
  • Replies 243
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

tystaples
tystaples

I have the same issue, started yesterday on my 2020 Denali 1500 with the 6.2. I purchased the truck new the end of April and it currently has 4900 miles on it. Crank and crank with no start. I did eve

tbarn
tbarn

A video of it not starting is of no use to the dealer or GM. It's not that they don't believe you but they cannot duplicate the concern. Watching it not start isn't any help diagnosing the issue.

econometrics
econometrics

True, but if you have a video with indisputable proof that the error is occurring, it will at least leverage them to take you more seriously and give more time to do tests needed to try and replicate

Posted Images

1997SierraSLT Enthusiast

1997SierraSLT

Posted
Posted

GM will now be offering military type sleeping bags and MRE's at a discounted price when your brand new GM truck leaves you and your family stranded out in the middle of nowhere in the dead of winter.

  • Like 1
  • Haha 1
tystaples Enthusiast

tystaples

Posted
Posted

Mine has been fixed since June with 11k trouble free miles since then. You'll notice there are multiple failure modes described in this thread, nearly all of them described fixes that worked. 

NHM25 Enthusiast

NHM25

Posted
Posted
On 12/28/2020 at 10:41 AM, Kevin Medeiros said:

Anyone have this fixed yet? I'm thinking GM may have no idea what's actually going on with these issues.

Haven't had a single issue since tightening the UBC bolts. That did the trick. Runs like a champ now. 

Kevin Medeiros Enthusiast

Kevin Medeiros

Posted
Posted
14 minutes ago, NHM25 said:

Haven't had a single issue since tightening the UBC bolts. That did the trick. Runs like a champ now. 

What are the UBC bolts? I'm not a car guy, but I've installed batteries, changed fuses and installed hoses/belts before without any issue. What am I looking for? If it's just a matter of tightening some bolts I'd rather do that than have the service guys mess with it.

Kevin Medeiros Enthusiast

Kevin Medeiros

Posted
Posted
19 minutes ago, Chris Dubois said:

I have the 3.0 diesel and has been in the shop nearly 30 days for the crank no start issue. I was just give the replacement or repurchase option. 

Wow, that seems extreme...crazy. It's only happened a handful of times for me so far.

Steve-2019 Enthusiast

Steve-2019

Posted
Posted (edited)
8 hours ago, Kevin Medeiros said:

What are the UBC bolts? I'm not a car guy, but I've installed batteries, changed fuses and installed hoses/belts before without any issue. What am I looking for? If it's just a matter of tightening some bolts I'd rather do that than have the service guys mess with it.

Read this and decide whether you want to do this or your dealer tech.  It's very easy IMO, but be careful.

 

Bulletin (PIT5756).pdf

Edited by Steve-2019
  • Like 1
NHM25 Enthusiast

NHM25

Posted
Posted
44 minutes ago, Steve-2019 said:

Read this and decide whether you want to do this or your dealer tech.  It's very easy IMO, but be careful.

BUELLTIN (PIT5756).pdf 1.02 MB · 7 downloads

Yep... that's what did it for me. I meant UBEC bolts... sorry for confusion... essentially the bolts that secure the fuse box to the body of the truck under the hood. If not tightened, it may not be properly grounded. This solution has worked for me and a few other folks, but not all. Worth a shot and probably something you can easily do -- at the very least show your dealer this bulletin. 

  • 2 weeks later...
Scotch and Truck New Member

Scotch and Truck

Posted
Posted

You can add me to this list.  Tried to start the vehicle, cranked slowly would not start.  It usually starts after waiting 3 to 4 minutes.  It happens almost every time I start the truck.  The dealership in my area will not return my calls, my wife is pregnant and I can't drive her car due to a previous accident.  So what happens when my wife goes into labor and my car doesn't start?  I guess I'll have to bite the bullet on a $5k fine for driving her car with no insurance.

  • 2 months later...
BrentF New Member

BrentF

Posted
Posted
On 12/23/2019 at 12:51 PM, Icefisher said:

I am embarrassed to report my issue was operator error.

When I was washing my truck, I cleaned the Weather-Tech Floor mats.  When I reinstalled them, I accidentally covered the accelerator pedal.  By doing this, the vehicle will turn over but will not fire.

 

I didn't feel too bad, because it took the tech 5hrs to find the issue as well.  My dealer was really cool, and did not charge me a dime for the issue.

This just got my boss's truck up and running as he thought he was dead in the water.  Thank you Google and thanks to this forum!!  

 

  • 3 weeks later...
Archangle Enthusiast

Archangle

Posted
Posted

Add me to the list to 2021 GMC Sierra 1500 3.0 ,100 miles on it.Stopped at hardware pushed start button and it just turned over for a couple of minutes without starting.Kept pushing start button to get it to stop but nothing would stop it,then it stopped.Pushed button again it started up.Took it to the dealer for exhaust leak in the cabin(incomplete weld around valve,below turbo)and to check the not starting problem.Replaced valve and said the no start problem did not leave a code and gm has no info on this lol.100 miles on it and two major problems.Gm’s quality control is disappointing.700 miles on it now and it has not done it again yet ,but it looks like it could happen again anytime.Traded my 2019 Silverado 5.3 new body style.Had brake failure (Almost slammed into a back of a car at my granddaughters school) and multiple recalls.Im a gm person,I own a 2010 camaro from new,my wife has 2020 equinox and owned at least 30 others over the years and never had a problem.

Archangle Enthusiast

Archangle

Posted
Posted

Well it happened again in my driveway ,900 miles on it.Heading to dealer tomorrow.strike two!! 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,859
    Total Members
    8,960
    Most Online
    needafix
    Newest Member
    needafix
    Joined

  • Who's Online   4 Members, 0 Anonymous, 651 Guests (See full list)

  • Latest Articles

  • Posts

    • OnTheReel
      Winter Returned

      By OnTheReel · Posted

      .30” of rain all month and it’s been weeks since that. “Mowed” our two properties today for the first time since July 2nd. It only took 30 minutes because all I had to do was level some weeds and saplings in a few problem areas. Everything else is dead.
    • tjonesdfw
      Shift to Park Message Warranty Claim

      By tjonesdfw · Posted

      Dealer reported a failed shifter module assembly so the whole shifter is getting replaced. Yet another premature repair… up to $12,000+ in extended warranty payout in only 5 years and 80,000 miles! 
    • tjonesdfw
      2021 with Intermittent AC Cooling Issues

      By tjonesdfw · Posted

      According to the dealer it’s an internal leak/failure of the compressor.  Again, another failure that shouldn’t happen at only 5 years and 80k miles.  For some reason the compressors must be hard to come by right now, because the truck’s been at the dealer almost a week and they just located a compressor at another dealer several states away today.  We’ll see if this fixes the issue.  
    • needafix
      Brake Bleed Procedure

      By needafix · Posted

      I'm not sure if this should be a reply on this thread or a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - ACDelco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles. When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so i did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance.
    • KARNUT
      Slate Electric Truck

      By KARNUT · Posted

      I wasn’t commenting on your post. Certainly wasn’t arguing. I was making an observation on my long term experience with supposedly proper length of driving for proper heat cycles. Works for me. Although I have seen water or vapor come out of exhaust when vehicles weren’t run very long and shut off. It’s very humid in the morning. Then hot and humid. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...