Jump to content

Recommended Posts

Posted

I am glad I can come to this community and ask questions but so pissed off the damn dealership could not tell me. I spoke to them and they said "We will find out for you". They never called me back, and yes I rang them up a second time.

 

Anyways, my 2014 GMC Sierra All-Terrain - 5.3L took E85 Flex Fuel. Any car or truck with a yellow gas cap will take it.

My new 2019 GMC Sierra AT4 - 6.2L has no cap and I can't find written anywhere if I can use the E85 Flex Fuel in it or not.

 

Anyone know?

 

Posted

As I understand it neither the 5.3 or 6.2 can run e85. The reason being is ethanol absorbs water if it is in the station storage tank for extended periods especially this time of year. Once it absorbs the water it turns into a white sludge  and can clog things up. I am not a scientist this is what I was told.

Posted

The current DFM 5.3l and 6.2l are NOT E85 compatible at this time


Sent from my iPhone using Tapatalk Pro

Posted

The 2019's for the 5.3 and 6.2 are not FF.  Makes me mad that they didn't offer it.  I still run a 50/50 mix of E85 and Premium in mine.  Same goes for my 2002 Silverado.  It isn't flex fuel but I do the same, 50/50 mix.  Love the way they run with it since it boost the octane up nicely.  Not to mention I like the exhaust smell. :)

Posted

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

  • Like 1
Posted
48 minutes ago, jumpinjoe said:

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

We've decided that the old two stroke in my dad's boat doesn't like ethanol so we put premium in it and it runs much better. 

Posted
The 2019's for the 5.3 and 6.2 are not FF.  Makes me mad that they didn't offer it.  I still run a 50/50 mix of E85 and Premium in mine.  Same goes for my 2002 Silverado.  It isn't flex fuel but I do the same, 50/50 mix.  Love the way they run with it since it boost the octane up nicely.  Not to mention I like the exhaust smell. [emoji4]


You actually use 50/50 Super/Flex and zero issues? I just started doing it with 5 gallons of E85 per tank of super


Sent from Above
Posted

Appreciate all the replies, glad I asked instead of just adding it in LOL..... Shitty they did not set the newer trucks up to run on it. My 2014 Sierra loved the E85 juice I gave her.... :)

Posted
5 hours ago, jumpinjoe said:

My 2014 1500 is supposedly E85 compatible. Has the bright yellow gas cap and a big yellow sticker under the hood. I've not used anything more than E10 and hope to never have to. We still have a few local stations with non alcohol contaminated gasoline and about every 3rd or 4th tank I'll try to use that. About a dollar more per gallon I think, but it makes me feel better.

 

That alcohol gas is terrible on my o540 airboat engine. The valve seats in these old motors need that old gas with the lead in it to keep the valves lubed. We constantly have to add 'Lead Substitute' even with no alcohol. However, the alcohol gas does make them run a little cooler down here at sea level. That's a plus.

 

Regards,

jumpinjoe

I ran full tanks of only E85 in my 2014 and she loved it. I did 5 tanks on Premium and 5 tanks on E85 and compared notes.

E85 cost less, higher octane, truck ran better BUT it did not get as many KM's out of a tank as the Premium did. In the long run Premium was cheaper to run. But I still ran E85 every 3 or 4 tanks. No mix, just straight.

Posted

Isn't the FF an available option? Somewhere I got the idea it was.

 

Regards,

jumpinjoe

Posted
6 hours ago, Cpl_Punishment said:

We've decided that the old two stroke in my dad's boat doesn't like ethanol so we put premium in it and it runs much better. 

Just gotta know what kind of 2 stroke motor is he running? We don't see any 2 strokes down here where we run. Thanks.

 

Regards,

jumpinjoe

Posted
6 hours ago, TXGREEK said:

 


You actually use 50/50 Super/Flex and zero issues? I just started doing it with 5 gallons of E85 per tank of super


Sent from Above

Yes,  a 50/50 mix no issues.  Been running it that way for over 3 years now. 

  • Like 1
Posted
4 hours ago, jumpinjoe said:

Just gotta know what kind of 2 stroke motor is he running? We don't see any 2 strokes down here where we run. Thanks.

 

Regards,

jumpinjoe

Sorry, that's on his ski boat, not an air boat. I can't remember for sure what he used to run on his remote control boats and air boats but I can ask him. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed. Why not updates as well, especially since some of those can be safety related also?
    • That's good to know, but I don't think I'll even be running them under 45 in the rear  unless it's on the sand or something but will only be for a short distance anyways!    I didn't read all the instructions in the booklet yet, but do you know let's say I set the rear psi on the placard to 45, will the warning light come on soon as it drops under 45 or is there a percentage it has to drop from the set value before the warning light is triggered?
    • That's bad.  Like, its probably destroying the stub axle the CV slides into.   Do you have a proper lift installed with differential lowering brackets?  Did you install AT4/Trail Boss factory CV axles?  
    • Hot? New Jersey? Today? I was working on my old 2000 Silverado 1500 today. Believe me, it was boiling hot today. As it has been.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...