Jump to content

3rd Brake Light Camera Mod

joguzman711

By joguzman711
in Modifications & Accessories

 Share

Recommended Posts

joguzman711 Enthusiast

joguzman711

Posted
Posted (edited)

Is there a better option?  

I installed a LEER shell on the bed of my 2020 Chevy Silverado 2500 HD truck.  The shell is now blocking the 3rd brake light camera so that the feature of using a camera vs a mirror in the rear view mirror unit is now not an option.  I am limited to see what’s behind me using side mirrors only.  Below are my thoughts and notes:

 

The 2020 Silverado 2500 HD has a “Spoiler” on the back of the cab that houses the 3rd Brake Light assembly.  There are two cameras on that 3rd brake light assembly identified in the attached pictorial diagram as #4 and #6.  #4 Camera is listed as an Auxiliary Rearview Camera that works in conjunction with the trailer view camera feature and the #6 camera is the RearView mirror camera that allows one to see behind him via a flip of a switch on the mirror itself.

 

It appears that in order to remove the 3rd Brake Light assembly you will either have to remove the entire headliner or simply move the back of the headliner enough to access the screws (10) & (11) that secures the spoiler in place. Once removed, you can remove the 3rd Brake Light Assembly and replace it with a 3rd Brake Light assembly without cameras.  The 3rd Brake Light assembly connects to a harness listed as (9) on the pictorial diagram. 

 

My plan is to take the OEM 3rd Brake Light assembly apart and remove both cameras.  Purchase a Kia Telluride GPS Shark Fin antenna and gut it.  Mount the cameras onto it and install it on the LEER shell roof 5” from the back hatch.  Ensure I splice in enough conductor (15-20 ft)  to run it to the harness (#9) in the cab.  This should provide a plug and play installation.  I will need to ensure that the angles of the cameras mounted on the shark fin are correct.  Reinstall headliner after I verify all is functioning correctly.  Does anyone have any thoughts on this?  Is there a better option?

Spoiler Diagram.jpeg

pic 3.jpg

pic 1.jpg

pic 2.jpg

Edited by joguzman711
Add a pic
hkyfsh Enthusiast

hkyfsh

Posted
Posted

Sure would be nice to have an infotainment update that allows you to choose which camera is in the rear view mirror.

  • Like 2
joguzman711 Enthusiast

joguzman711

Posted
  • Author
Posted

Yes... this would be nice.  However. it appears that camera #6 connects directly to the rearview mirror.

  • Like 1
ArTurf Enthusiast

ArTurf

Posted
Posted

There's another thread about rear view mirror cameras and the subject about doing what you want to do came up. Someone was going to use a OE GM cable and try it but they never posted back how it worked. I myself would like to do this also

BlaineBug Enthusiast

BlaineBug

Posted
Posted

Following just because this sounds cool.  Some truck bed caps have a 3rd brake light incorporated as part of the design.  Would be sweet if Leer had a cap that used an OEM Chevrolet/GMC light.  Now extend the wiring, buy another OEM light, and there you have it, a factory look!

Limelight Enthusiast

Limelight

Posted
Posted
5 minutes ago, BlaineBug said:

Following just because this sounds cool.  Some truck bed caps have a 3rd brake light incorporated as part of the design.  Would be sweet if Leer had a cap that used an OEM Chevrolet/GMC light.  Now extend the wiring, buy another OEM light, and there you have it, a factory look!

Would be easier if they had a kit that included a “plug” fake third brake light for the truck, the extension wire - and used your existing 3rd brakelight With the camera on the cap. 

BlaineBug Enthusiast

BlaineBug

Posted
Posted

Absolutely.  The cap could just be black, doesn't even have to match the body color because nobody would see it anyway.  This has to be a thing their engineers are thinking about since rear view cameras are so common these days.  And it's nuts to cover them up!  Considering they are mounted in this spot and not in the tailgate anymore.  Maybe they will moving forward.

joguzman711 Enthusiast

joguzman711

Posted
  • Author
Posted (edited)

The cap or Leer shell came with a 3rd Brake Light   It’s a requirement in most states. What it doesn’t have is a camera and even if it did, the angle would not be correct hence the GPS shark fin idea. BTW, the new 2020 Camaro comes with a shark fin with a built in camera but the angle won’t work on a cap or shell application. 

Edited by joguzman711
joguzman711 Enthusiast

joguzman711

Posted
  • Author
Posted (edited)

My “Shark fin” antenna just arrived.  I gutted it. GM part 84519353.  Now the wait.  My upholsterer won’t have an opening until the end of April.  We need to drop the headliner to remove the spoiler/3rd brake light assembly.  I’m going to go ahead with my idea. Will keep you posted.  

Edited by joguzman711
  • Like 1
joguzman711 Enthusiast

joguzman711

Posted
  • Author
Posted (edited)

This is a sharkfin GPS antenna with built in camera I found on a 2020 Camaro.  Looks ugly.  The SharkFin antenna I bought looks better.    

DD1E8C5E-AB7A-4CC1-B4B8-796A12E17E11.jpeg

Edited by joguzman711
kf9yr Enthusiast

kf9yr

Posted
Posted

Are you going to mount the bed camera on the interior of the shell and the rear view camera on the shark fin?




Sent from my iPad using Tapatalk Pro

mkeddie Enthusiast

mkeddie

Posted
Posted
Are you going to mount the bed camera on the interior of the shell and the rear view camera on the shark fin?




Sent from my iPad using Tapatalk Pro
For the rear view mirror to work In camera mode the bed view camera will have to be mounted outside

Sent from my Moto Z (2) using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Head South
      Open Door Chimes When Key is Out

      By Head South · Posted

      2020 2500 HD...I had some trouble getting the key into the ignition switch but went in fine after applying some extra effort. Since then, the door chimes when open when the key is out of the ignition. Also, when I lock the doors with the switch on the arm rest, the driver door locks but then unlocks. (I can lock everything fine with the fob) The message on the little screen displays the "Engine Hours"...kinda weird.   I'm guessing something happened to the ignition switch and it thinks the key is still in there. I unplugged the batteries for 20 minutes, no change. There are a number of videos on YouTube but nothing I can find that address this specific issue. Ideas appreciated, thank you.
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • AndrewF
      Front End Rattle

      By AndrewF · Posted

      Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
    • KARNUT
      What did you do to your "other" car (aka musclecar) today

      By KARNUT · Posted

      We try to make cruise the coast. It’s where our favorite casino is. I only want to spectate. Never took a car. Always had one to take. I belonged to a club once. Even when I used to drag raced. It was during test and tune. Probably because I’m not a night owl, party person. 
    • RyanbabZ71
      What did you do to your "other" car (aka musclecar) today

      By RyanbabZ71 · Posted

      We had a pretty big cars and coffee in Indy this past weekend.  Pretty much anything and everything was there.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...