Jump to content

Recommended Posts

Posted
On 11/9/2020 at 2:39 PM, Stephen L. Pannell said:

Just ordered the Pulsar LT Control Module. Makes speed limiter changes up to 140mph. That should be enough :)

I think that your rear end ratio and the engine power will limit you right before then.  The old police tahoes had 5.3l with 3.08 rear ends and would do 139.  The new 2021 police models have 5.3l with 3.23 ratios and show 130 as a top speed.  I'd be interested in seeing what yours will do when removed.  I'm getting my WAMS deal in the mail soon.  

Posted
14 hours ago, Colossus said:

Keep in mind the interceptor tahoes are 2WD not 4WD. 

Right... the 4WD models are limited to 121.

Posted
On 11/9/2020 at 2:39 PM, Stephen L. Pannell said:

Just ordered the Pulsar LT Control Module. Makes speed limiter changes up to 140mph. That should be enough :)

100 bucks more than WAMS and doesn't have nearly as many options ?

Posted
On 11/13/2020 at 2:40 PM, AJ Sullivan said:

Right... the 4WD models are limited to 121.

As of 2021, 125  that's 5 MPH less than the RWD.:)  What's really sad though, is that Dodge has lowered the top speed of the 5.7L Hemi Charger Police package to 140 MPH, same as the 3.6L V-6.  Weird and disappointing to many state police agencies who liked the upper 155+ MPH top speed the Charger offered.  That now puts the Ford Explorer police Interceptor with the 3.0 Egoboost as the quickest.  148 MPH top speed, 0-60 5.75 sec. 

 

https://www.michigan.gov/documents/msp/2021PreliminaryVehicleTestData_706059_7.pdf

 

 

Posted (edited)
On 11/12/2020 at 10:34 PM, AJ Sullivan said:

I think that your rear end ratio and the engine power will limit you right before then.  The old police tahoes had 5.3l with 3.08 rear ends and would do 139.  The new 2021 police models have 5.3l with 3.23 ratios and show 130 as a top speed.  I'd be interested in seeing what yours will do when removed.  I'm getting my WAMS deal in the mail soon.  

I had my ‘15 ccsb 5.3, 6 speed 4x4 with 3.42 gears going 135.  It was still climbing at 135, but I let off.  

Edited by SILVER SLED
  • 3 weeks later...
Posted

Has anyone with a T1 CCSB deleted the speed limiter and run it up?  How high did you get it and how did it feel?  I am still waiting on mine to get done. 

Posted (edited)
4 hours ago, AJ Sullivan said:

Has anyone with a T1 CCSB deleted the speed limiter and run it up?  How high did you get it and how did it feel?  I am still waiting on mine to get done. 

I can't find it right now, but somewhere on YouTube there is a vid of one going 148 that has some upgrades.  Not sure what they removed the limiter with, but that's the speed they shut down at.

{edit} Looks like it was a 2018 model, now that I found the video

 

Edited by jddealer
update
  • 4 weeks later...
Posted

I set mine to 130 although the speedometer goes to 140. Took it to 120 and it was rock solid and still climbing fast. No doubt in my mind that it would peg 140 if I so chose. What I like most is the throttle sensitivity increase. No lag whatsoever and even seems to change the trans mission up shift and downshift points. Full power now at the hit. Got to be careful because it will break the tires loose under 40 mph.

Once I replace these T rated tires with some new H rated Bridgestone shoes I won't be nervous about taking it all the way. 

  • 5 months later...
Posted

It has zero to do with truck packages. It's strictly tire rating issues.  I have a 2021 AT4 with the 18" rims and my brother has a 2021 AT4 with the 20" rims. I cut out at 98 and his cuts out at 112ish.  

  • Like 1
Posted
1 hour ago, Mike Bradberry said:

It has zero to do with truck packages. It's strictly tire rating issues.  I have a 2021 AT4 with the 18" rims and my brother has a 2021 AT4 with the 20" rims. I cut out at 98 and his cuts out at 112ish.  

Yep

 

Had a guy on here arguing up a storm about it.  I ended up getting WAMS which came with a ton of other things added

Posted
1 hour ago, Mike Bradberry said:

It has zero to do with truck packages. It's strictly tire rating issues.  I have a 2021 AT4 with the 18" rims and my brother has a 2021 AT4 with the 20" rims. I cut out at 98 and his cuts out at 112ish.  

Well to be completely honest its considerably more involved than just the tire rating; many of these trucks have tires rated well beyond the top speed they are limited at. The Trucks actually have several limiters and whatever one is the lowest is the one the system utilizes. Generally this is the transfer case limit or everyones favorite the driveshaft limit 😉 If you hang around long enough with the high speed guys about 50% of the time they have a driveshaft pretzel horror story lol

  • Like 1
Posted

My 2018 Sierra SLT 6.2L with 8 speed, Gibson Catback exhaust, S&B CAI, and Hypertech power programmer hit 130 MPH in a breeze, but my tires were only rated for that speed so that’s where I set the speed limiter too. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   0 Members, 0 Anonymous, 224 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...