Jump to content

Recommended Posts

Posted

has anyone else had trouble with there truck going sideways on gravel roads in pot holes or washboard ????    is there a fix for this that is not too expensive ????   new here so Thank you for your Time ....

Posted

I never had but a friend has. Had to replace shocks. I would look at the Bilsteins.

Sent from my Pixel XL using Tapatalk

Posted

Are you are running truck 'unloaded' and have factory tire sizes at the pressures on the door sticker? 

 

If so try running reduced tire pressure - its a free trial.

 

Washboard road has always been a issue in a pickup -- especially unloaded and at speed. 

Suspension adjustment -- by setting tire pressure match current loading -- can help.   

 

Posted

I have a 2019 Sierra SLT 4x4, and I lived with the crappy ride for almost a year. I noticed the same thing, it would go sideways when going over bumps, lose rear traction easily, etc. I installed new Bilsteins on the rear about three weeks ago - best $200 I ever spent. The ride is much improved on all less than perfect surfaces.

 

As others have said, loading up the rear with several hundred pounds and/or reducing tire pressure can help (I tried both) but neither helps nearly as much as getting the junk factory rear shocks out and replacing with good ones.

 

  

Posted

A LOT of us have this issue. It's very well-known. 

 

Adjust your tire pressures down some, it helps. The shocks will also get better as you put mileage on them. 

 

Best solution, though, is to replace them with either Bilstein (not out yet) or Eibachs. 

Posted

I just put Bilstein 5100s on the rear of mine today. I haven't driven it yet.

There is now a 5100 for the front but no one has it yet. Part # for the front will be Part Number: 24-293297. The rear is Part Number: 24-293471.

Posted

I've driven a truck on washboard dirt roads since before I was legally old enough to do so and every one of them to some extent will do that, and the longer the wheelbase the move pronounced the effect. Trucks are made to haul stuff and when the bed has nothing in it they will tend to get a little "squirrelly", they certainly make shocks that will help but as mentioned a cheap fix it to put something in the bed. Doesnt have to be much...back in my wilder days even a igloo full of ice and beer makes a big difference lol. 

Posted
On 7/7/2020 at 12:50 PM, Barry Hartling said:

has anyone else had trouble with there truck going sideways on gravel roads in pot holes or washboard ????    is there a fix for this that is not too expensive ????   new here so Thank you for your Time ....

I had the same problem on my F150. Bilstein 4600’s fixed it. Can’t wait until they have the 4600’s for the new Sierra. Hate that feeling.

Posted
On 7/15/2020 at 7:48 AM, Barry Hartling said:

Thanks Guys for all the help.. going to see if the dealer will help  Thanks again .....

They won't be of any help. You need new shocks to get the more planted ride you're wanting (and should come OEM off the lot!) 

 

The other day I was following Mrs. Econometrics home in her minivan, she was driving my RST. I was watching the rear suspension on my RST... wow... it was just bouncing up and down like a loose noodle. Someone with a TB was driving in front of us, and I honestly didn't see the same play in the rear end. Then a GMT900 1500 CC drive along side my RST for about a mile... same thing. Rear axle just did not look as bouncy. Made me realize how badly I need to get rid of these Rancho twin-tubes. 

Posted
1 minute ago, econometrics said:

They won't be of any help. You need new shocks to get the more planted ride you're wanting (and should come OEM off the lot!) 

 

The other day I was following Mrs. Econometrics home in her minivan, she was driving my RST. I was watching the rear suspension on my RST... wow... it was just bouncing up and down like a loose noodle. Someone with a TB was driving in front of us, and I honestly didn't see the same play in the rear end. Then a GMT900 1500 CC drive along side my RST for about a mile... same thing. Rear axle just did not look as bouncy. Made me realize how badly I need to get rid of these Rancho twin-tubes. 

The key question here is: why weren't you making Mrs. Econometrics drive the minivan? 

  • Haha 1
Posted
10 minutes ago, Cpl_Punishment said:

The key question here is: why weren't you making Mrs. Econometrics drive the minivan? 

? We had $5500 of (warrantied, thank God!) work done on the suspension, so I needed to make sure the dealer got it right. ? 

  • Like 1
Posted
48 minutes ago, econometrics said:

? We had $5500 of (warrantied, thank God!) work done on the suspension, so I needed to make sure the dealer got it right. ? 

Which make? 

Posted
1 hour ago, econometrics said:

it was just bouncing up and down like a loose noodle

That just sounds more like something that would be happening in the minivan.....

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,958
    Total Members
    8,960
    Most Online
    B07
    Newest Member
    B07
    Joined
  • Who's Online   3 Members, 0 Anonymous, 695 Guests (See full list)


  • Latest Articles

  • Posts

    • Looks like it's riveted to me. What is wrong with that 1? Welcome to the Forum!
    • Missing pieces of the Assembly   Detergency vs Solvency   Not the same thing. Detergency is the mechanism that surrounds solid particulates preventing amalgamation. Usually accompanied by a Dispersant whose job it is to keep those encapsulated particles in Suspension. Solvency keeps things that can be dissolved in solution.    Salt is a solid that can be dissolved. Pepper is a solid that cannot be dissolved. A detergent/dispersant is effective on pepper but a solvent is more effective on salt. As long as the solids remain in either state, dissolved or dispersed then they can be be removed with the oil upon change.    How many wranglers does it take to herd cats? Depends on how many cats your herding. How much sponge does it take to soak up water? How much water is there to soak up? Point is most oil blends start with some herding ability and next to zero sponge and recently even fewer wranglers are being sent to do the same job.    So you start with a dozen cowboys and zero cows but at the drive progresses you pick up cows along the way, but not cowboys. At some point you have more cows that the wranglers can handle and some leave the herd. Deposits. And the API has an acceptable number of cows they are willing to let loose. In the ideal world zero is the right number for he rancher but to the butcher....a few lost is fine. This cow is beat to death. Let's move on....   Solvency isn't something oils on the Walmart shelf care about AT ALL. Problem is, you motor does. Fuels driven varnish sticks rings and only a solvent can keep them in check. The bet is that the solids driven portion that plug the expander rings and the oil drain backs and VVT screens and AFM screens will be an issue long before varnish is. Not that it wont be but if they market well enough the consumer can be kept ignorant enough to either believe it is "normal" (A quart in 1 or 2K is normal) OR is kept at bay longer than the first owner is likely to hang on to the unit. Solvency cost money.    Now the OEM's have John Q. Public buffaloed into the belief that the number cows accumulated along the trail is a known and predictable CONSTANT. It isn't. Nor is the rate at which they crossed paths with them. Only the number of wrangles is constant. Or was. Each new generation of oil sees fewer and fewer of them.    So what happens when the number of cowboys is lower (lower TBN) with each seasons trail but the trial is longer (OCI) and the number of cows along that trail continues increase? (Conditions that promote deposits).    For awhile the blenders were on to something. Better bases are harder to degrade (fewer cows) but that was overtaken by a longer trail (OCI) and improved breeding (More cows) while continuing to reduce the cowboy staffing levels (TBN/Aniline #).    Marketing has been successful. We've fired most of the staff, cows breed line bunnies, the trail is ten times longer and we've convinced the boss his ranch is in better shape that it ever was.    That kids is just the cleaning side. The side few pay attention to.     
    • Mann+Hummel since 1941 per their web site 
    • Looking for this part for my truck. They don't sell just that one piece and to get it you have to pay over $100 even used for the whole air tube. The piece the hose clamp snaps into that is held on by the screw and nut. If anyone has access to one please let me know.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...