Jump to content

Recommended Posts

Posted

With all of GM's supply issues, my new 2500 still has no build date and will be missing some features.  I have just been offered an existing 3500 instead, which has all of the features I wanted except for the 5th wheel package which the dealer can install.  So ..  do I go with the 3500? Really reluctant to go bigger as I was actually considering a 1500 this time .. and worried about classificiations ===you know, when the government decides to make you safety and when they don't, lol.  Seems like the weight difference isn't much, but .. .wait for the 2500?  or go with this one?

Posted

Previous generations this was more of an issue as they capped the gvwr at 10k for the 2500 up until ‘20. Since then they are both well over 10k gvrw so I doubt there would be much difference, escpecially of you don’t already know because of certain regulations that you need to adhere to.  I actually had the opposite problem, I wanted a 3500 becuase they are more capable for essentially the same money with no drawbacks but all I could find was a 2500.  I would do it

 

Posted

The only real difference is the 3500 has an extra leaf spring. I believe the brakes are bigger too. Get the 3500.


Sent from my iPad using Tapatalk

Posted

Extra leafs, higher GVWR, 12 inch axle on diesel.  

 

Otherwise everything else is the same srw 2500 vs srw 3500.  Engine, trans, brakes, etc.  

Posted

I ordered a 2500 Denali with the 5th wheel package. I preferred a factory install since it'll come sealed and undercoated.  I've had a dealer installed 5th wheel and comparing them both really like the factory install.  I'd wait for the 2500 for this and the ride as others have commented.

Posted

I've had both already.  Zero difference in ride between the 2500 and 3500.  (I have the 3500 now).  

Posted

I think I would go with the 3500, you can always haul lighter, but you can’t haul heavier. As soon as you start looking at trailers......

  • Like 1
Posted

+1 on going with the 3500.  Depending on the state you can register both a 2500 and 3500 as 10k to stay under the limit so you don't need a dot number if you run it for your business.  

Posted

I rated my 2500 at 10k GVWR to allow me to pull a 16K trailer without a CDW license. 

Posted
On 3/8/2021 at 9:44 AM, gearheadesw said:

I think I would go with the 3500, you can always haul lighter, but you can’t haul heavier. As soon as you start looking at trailers......

^^^ What he said!!!

Posted

I would stay away from the factory hitch, that is the only thing I'm not happy with on my truck.  The goose ball is loose in the hitch and now it will not unlock and come out of the hitch.  Should have put a B & W in it and thrown the factory one in the trash!!!  Just my $0.02  your experience may vary!

:jester:

Posted

I use the B&W goose ball (TruckProUSA B&W GNXA2061) and it works great.  This is with the factory hitch.

Posted

better to have more than enough than not enough.......all things being equal with just an added spring in leaf i would go for 3500

 

if there was a serious ride or money issues maybe not.....but they are basically same in every way cept for more capability and they have it right now.....i would think a 3500 for anyone who tows and needs a HD.....they are such different trucks than a 1500

Posted

My vote is 3500. See too many people maxing or almost maxing out payload on 2500. I wouldn’t go 2500 anymore. 1500 or 3500. 
Your money though and you spending a lot of it so make sure you are happy with your choice. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,245 Guests (See full list)

  • Latest Articles

  • Posts

    • Common Sense Assembly   Your driveline is forgiving of the occasional mistake. It will even often forgive the random serious blunder. But it will not forgive a continuous bad habit.      What? Not everything needs to be a five thousand word essay.       
    • We drove about 15 minute east today to visit a friend and saw a steep increase in price in the same county. About 50 cents a gallon steepper. 
    • Sure about that? A degree wheel and a dial indicator would lower your degree of assurance in that statement. 😉    It why we have offset keys and dialable timing sprockets. Just say'n.... I've built a few and have never seen one "On the money". 
    • I will admit I haven't experimented much with pressure drops beyond the numbers I put in and part of that is that the numbers I used are fairly low and then found out it would trigger regardless at that 35 psi. Having said that I had tried before had changed the placard pressures and being that I have a 1 ton set to 80 on the placard for the rear I believe it triggered close to 60, the front I don't recall now for sure but thought maybe it could get close to 45 from that factory 60 placard pressure. So I never did figure out if it was a number of psi from placard pressure to the alarm or a percentage of the total placard number as some figured it was like a 25% drop from placard pressure would trigger it. So as to try and answer your question, I believe I set the placard pressure on the front to 47 or so and while I run the front tires at 40, they have dipped below that some if its colder and I haven't put "winter air" in yet and never once have had the front alarm go off. I would say that the answer your looking for is no, that if you set your placard pressure to 45, you have a certain amount of room to drop below that pressure before the alarm will go off.    The pressures you decide to run in your truck, that ends up being what makes sense to you based on what your carrying in your truck or if towing, then have to bump them back up to something that will carry the load in the rear and the fronts typically left at the same pressure. It all comes down to that chart I put the link to and using an accurate roadside scale to be your guide, both unloaded and then loaded to know your minimum safe pressures.    I just wish GM would allow a person to change the readings for the tire pressures to the English system of pounds as I have to look at that goofy metric reading that will never ever jive in my head and will go over and change it just to figure out what they are if need be and then change it back. 
    • That part I understand, that the dealer can do it. But I'm not understanding why updates that were available to the truck since it left the factory, or the dealership originally, would not still be available to it without dealer intervention.   I'm thinking along the lines of recalls. They stay available until they are completed, regardless of whether they are in warranty or not, or in the hands of the original owner or not. Why not updates as well, especially since some of those can be safety related also?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...