Jump to content

Recommended Posts

Posted

Thank You Black02Silverado, yes trucks are high dollar, but think I will keep mine.

 

Thank You m3n00b, I would guess about the same price here in Northern Michigan.

 

Thank You VanguardK2, I think your correct about re-gearing.  With the trailer Dry weight at basically 7500 pounds, I figure loaded about 8000 to 8500, and probably Waaay too heavy for the 3.08 gears without eventually causing damage. 

If it is re-geared, do you feel the 3.42 gear is good enough, or should I go with 3.73 gears???

 

Thank You

Posted

Go with the 3.73s.  That's what the NHTs in the previous generation have and they are towing beasts.

Posted
Thank You Newdude and Garagerog!
So, I have a GM Truck not Capable of Towing the Rockwood that was made for Canada, wow.
And to think I sold my old 72 Ford that could have hauled just about anything, for this GM Truck, what a Shame.
 
You should have done your research. Don't assume all trucks can tow 9000+ . The ones with your 3.08 gears are worthless for towing anything over 5000 lbs.
Don't blame GM for you ignorance. Wow.

Sent from my SM-G991U using Tapatalk

Posted

i agree with james , 3.73 is the way to go but the NHTs have a 9.76 carrier and the others have 9.5 so stock gearing wont fit. so cost wise go 3.42 unless you can find a complete rear diff with 3.73

Posted
1 hour ago, silveradosid said:

i agree with james , 3.73 is the way to go but the NHTs have a 9.76 carrier and the others have 9.5 so stock gearing wont fit. so cost wise go 3.42 unless you can find a complete rear diff with 3.73

Whats NHT’s? 😂 wonder if u could find a full rearend with 3.73

Posted

Dieselfan1,  Thank You, I did look at various trucks.  But, GM should not have put tow Capacity at 8500 Lbs., other wise I would not have Bought my truck!

 

Other than towing capacity, I really like like my GM Truck.  In hindsite, I had No Plans on buying a big travel trailer, and would not have, if not for now raising 3 Grandchildren. 

Will admit, it would be nice to afford one of those 2500 Diesel crew cab 4x4 but not in the cards money wise.

  • Like 1
Posted

Thank You swathdiver, silveradosid, Frankielozano214.

I will look for a full axle 3.73 rear and front 3.73.  If I am going to spend the money, might as well have extra tow capacity.  Wish I would have bought a truck with the 3.73 in the first place.

 

Thanks Again everyone-

  • Like 3
Posted

You're a hero for giving these children a second chance for a proper upbringing.  Thank you.  I was fortunate to know the towing capabilities of my truck when looking for a trailer and was able to find a proper match.  I knew about the re-gearing option and the various ways to deal with heavier tongue weights.   For the same reason you are hesitant to buy a used vehicle with unknown history is the same reason I wouldn't choose to add red flags to my vehicle. I'd seriously look at trading the truck or the trailer.  If I was looking for a trailer the size of your Rockwood, I'd set my sights on a base 2500/3500.  I find the most basic WT has a list of standard features that exceed the options list on your '72 Ford! 

  • Like 4
Posted

Thank You Donstar,

appreciate the courtesy.  

I will look for a used 2500/3500, have to be a great deal, Gas or Diesel?

 

I like the day to day gas mileage on the 1500, and really took good care of my truck, planning on it being my last.

Posted
1 hour ago, James Beyer said:

Thank You Donstar,

appreciate the courtesy.  

I will look for a used 2500/3500, have to be a great deal, Gas or Diesel?

 

I like the day to day gas mileage on the 1500, and really took good care of my truck, planning on it being my last.

A diesel would be nice but more expensive to buy and maintenance can present some costly surprises.  I'd look for gas.  You are right that you will return to gas consumption reminiscent of your '72 Ford.  However, the experiences you may face towing a trailer with an underrated tow vehicle will likely be more upsetting than higher fuel costs.  

Posted

Thank You Donstar, will see what is available near me.  Under rated truck to tow doesn't sound like fun.

 

Mert Tas, had a 8N for many years, great tractor.

  • Like 1
Posted
2 hours ago, James Beyer said:

Thank You Donstar, will see what is available near me.  Under rated truck to tow doesn't sound like fun.

 

Mert Tas, had a 8N for many years, great tractor.

James, you are a very nice man, thanking all comments when some are just 🤔🤨

 

The 2500/3500 is a good plan, just for the fact swapping gears, will still put you at your trucks limits with the trailer. Then factor in the truck itself, passengers and gear, full tank of gas, and the trailer, which will have propane tanks, water tanks for fresh and sewer. It all adds up fast.

 

Better to have more truck than you need, mainly because you can not replace passengers like cargo if things go wrong on the highway.

  • Like 2
Posted

Agree with Jim here, a regear would be my fix but I honestly wasn't factoring in people and gear to max out the 3.73s and going waaay past the 3.42s the 2500/3500 gambit is the best choice. I sympathize with O.P as I bought a 16 5.3l because I wanted black, leather and CC short bed with the face-lift model and color match bumpers. My only regret is getting some with an 8 speed but that's what I found that I wanted to the tee and sometimes there's one small change that just isn't perfect for what you need it for.

Fortunately people have a new generation to trade in for, so there's plenty of trucks available. Advise to the O.P, look out of your state for them. I was when looking for mine and found some good deals, but before I pulled the trigger on one from Arizona I found the one I have. Just ask for pictures of the frame for rust and other concerns. I was given many from that particular dealer and I was fully willing to fly out of state and pay for the truck if I hadn't found mine.

To Jim, we all know what comment your referring. I think we all felt the same way about it.

The o.p even stated the owners manual and door sticker didn't match which WOULD make it GMs fault. Not everybody knows about everything to look for on trucks and the propaganda from their respective manufacturers on the model l. They don't know and sometimes it's a problem and sometimes it's not. This just happened to be one of those times.

Sent from my SM-G986U1 using Tapatalk

  • Like 2
  • Thanks 1
Posted
7 hours ago, James Beyer said:

Thank You swathdiver, silveradosid, Frankielozano214.

I will look for a full axle 3.73 rear and front 3.73.  If I am going to spend the money, might as well have extra tow capacity.  Wish I would have bought a truck with the 3.73 in the first place.

 

Thanks Again everyone-

You do not have to replace the entire 12-bolt rear axle to upgrade to 3.73 gears.  You can purchase a more stout carrier that is stronger than the one you have though and put the 3.73 gears on it.  The front differential will handle 3.73s easily.

 

Go to LKQs website and put in  your vehicle and what you are looking for and they will show you what's available and for how much.  Remember, your K2s have 12-bolt axles, both 9.5 and 9.76 depending on options.  AAM (demandaam.com) was the original supplier to GM.

  • Like 2
Posted

Thank You Swathdiver,

if I change to the 3.73 rear, does that also increase my payload?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Here's the second UOA on my 22 Wrangler with the Ecodiesel. This has 5k miles on AMSOIL Signature Series DEO 5w-40. The first one was dealer installed oil, no clue what it was, the second is what AMSOIL recommended, European FS 5w-40, Most of the Ecodiesel world is showing great results using the European MS 5w-40, I figured I would see how the DEO works. This is using an Ecoguard oil filter. It's my understanding this engine likes to shed aluminum.  We will see. So far I don't think this is too bad.    
    • I'm surprised nobody seems to offer a solution like the start/stop device I put in my new truck. Remembers my setting when shutdown. And while it still starts up in start/stop, it stores/evaluates what mode it was in when shut down and will change it whithin a second or 2 of startup. It'd be nice to have something like that for the DRLs.
    • 2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...