Jump to content

Recommended Posts

Posted (edited)

2016 Silverado 1500 High country stock height with 22" stock rims, P285/45 R22 110H SL

Have a set of Bridgestone Dueler A/T's on their right now that came with the truck and sliced the sidewall in one of them last night.

They have some life left in them but it's the first set of Bridgestone tires I've had that I can recall and haven't been totally happy with them.

I don't deal with off roading in this truck and don't have to worry about snow anymore. So mainly just dry and wet roads.

 

My biggest problem with what I have is they could be a whole lot better on wet roads, my old lifted '05 with a set of Procomp's grabbed the road a lot better in my opinion.

I'm considering a set of Michelin Defender LTX M/S I'm curious on opinions since they don't exactly give these things away.

 

Other suggestions?

 

Thank guys.

 

Kenny

Edited by Kenny782
  • Kenny782 changed the title to Tire Opinions - Bridgestone Dueler vs Michelin Defender or ?
Posted
2 hours ago, Kenny782 said:

2016 Silverado 1500 High country stock height with 22" stock rims, P285/45 R22 110H SL

Have a set of Bridgestone Dueler A/T's on their right now that came with the truck and sliced the sidewall in one of them last night.

They have some life left in them but it's the first set of Bridgestone tires I've had that I can recall and haven't been totally happy with them.

I don't deal with off roading in this truck and don't have to worry about snow anymore. So mainly just dry and wet roads.

 

My biggest problem with what I have is they could be a whole lot better on wet roads, my old lifted '05 with a set of Procomp's grabbed the road a lot better in my opinion.

I'm considering a set of Michelin Defender LTX M/S I'm curious on opinions since they don't exactly give these things away.

 

Other suggestions?

 

Thank guys.

 

Kenny

The Bridgestone's are just a terrible tire as they age, 43000 miles on mine and they have become completely useless in the rain.

 

We put the Michelin's on our Tahoe, they are well worth the money. Better ride, great in the rain, and wearing great. 

  • Like 2
Posted (edited)

Thanks Jim.

That's what I was hoping I'd hear, read similar but so many BS reviews around wanted to check with some real people driving on these things.

 

I see so many of these Bridgestone's sitting on GM trucks I was starting to think it was just me lol.

Granted mine already had a little over 30K on them when I bought the truck.

But yeah these things have been annoying me for a while and definitely not getting any better, there's more life on them but just not doing the job.

I've been looking for an excuse to replace them so whoever threw that crap on the road may have ruined my night but probably did me a favor haha.

Edited by Kenny782
  • Like 2
Posted
3 hours ago, Kenny782 said:

2016 Silverado 1500 High country stock height with 22" stock rims, P285/45 R22 110H SL

Have a set of Bridgestone Dueler A/T's on their right now that came with the truck and sliced the sidewall in one of them last night.

They have some life left in them but it's the first set of Bridgestone tires I've had that I can recall and haven't been totally happy with them.

I don't deal with off roading in this truck and don't have to worry about snow anymore. So mainly just dry and wet roads.

 

My biggest problem with what I have is they could be a whole lot better on wet roads, my old lifted '05 with a set of Procomp's grabbed the road a lot better in my opinion.

I'm considering a set of Michelin Defender LTX M/S I'm curious on opinions since they don't exactly give these things away.

 

Other suggestions?

 

Thank guys.

 

Kenny

I have the michelin defender ltx on my wife's yukon 285 45 22 night and day difference on wet roads and for me the snow up here in the midwest I'll be getting them for my 18 silverado once it needs new rubber the 284 45 22 ran me around 1400 out the door😬 well worth it imo

  • Like 2
Posted (edited)

 

Ouch.

Found 'em for $1,300 installed with taxes locally just hadn't pulled the trigger yet, I thought that was bad enough.

Looks like $70 back from Michelin for the next few weeks at least, if they work as expected I can live with it.

 

Edited by Kenny782
  • Like 1
Posted
18 minutes ago, Kenny782 said:

 

Ouch.

Found 'em for $1,300 installed with taxes locally just hadn't pulled the trigger yet, I thought that was bad enough.

Looks like $70 back from Michelin for the next few weeks at least, if they work as expected I can live with it.

 

 

 

Shop your local GM dealers too.  Not only can they price match brick and mortar stores nearby but you can get $70 rebate from GM for Michelins and if you have or sign up for the GM credit card and use it to buy them they match the rebate as a statement credit.  So $70 becomes a total of $140 off.  

  • Like 3
Posted
31 minutes ago, newdude said:

 

 

Shop your local GM dealers too.  Not only can they price match brick and mortar stores nearby but you can get $70 rebate from GM for Michelins and if you have or sign up for the GM credit card and use it to buy them they match the rebate as a statement credit.  So $70 becomes a total of $140 off.  

Just did this myself last week.  Also comes with free rotations or 1 alignment a year for 3 years.  

 

Fantastic tire, always knew they were!  Not playing off road as much anymore so these replaced my trusty KO2s.  My wife and I can talk without raising our voices and I can hear that noise under the dash that I thought went away 4 years ago!  LOL

  • Like 3
Posted (edited)
3 hours ago, newdude said:

 

 

Shop your local GM dealers too.  Not only can they price match brick and mortar stores nearby but you can get $70 rebate from GM for Michelins and if you have or sign up for the GM credit card and use it to buy them they match the rebate as a statement credit.  So $70 becomes a total of $140 off.  

Not sure I want to take out another credit card, I stopped myself from taking out these damn store cards everywhere and canceled most of the ones I had.

I do appreciate the info, for $140 I'll definitely look into it.

 

Although the local dealer has tried to unsuccessfully rip me off once for almost $700. Not sure I trust them for anything lol.

 

Edited by Kenny782
Posted

Here are my other suggestions for good tires that we sell a lot of up here in Minnesota.

 

Michelin Defenders

 

Cooper Discoverer HTP2

 

Cooper Discoverer AT3 4S


Cooper Discoverer SRX

 

Pirelli Scorpion Verde All Season Plus2

 

BFG Trail Terrain TA. This is a new tire from BFG and the cost is just right for most customers as well.

 

 

The BFG, Pirelli and Coopers are going to run you about $200-300 less than the Michelins and Cooper has a current rebate going on as well for $70.

 

I personally like the Cooper options and the new BFG tire.

 

 

  • Like 2
Posted (edited)
Quote

Here are my other suggestions for good tires that we sell a lot of up here in Minnesota.

 

Michelin Defenders

 

Cooper Discoverer HTP2

 

Cooper Discoverer AT3 4S


Cooper Discoverer SRX

 

Pirelli Scorpion Verde All Season Plus2

 

BFG Trail Terrain TA. This is a new tire from BFG and the cost is just right for most customers as well.

 

 

The BFG, Pirelli and Coopers are going to run you about $200-300 less than the Michelins and Cooper has a current rebate going on as well for $70.

 

I personally like the Cooper options and the new BFG tire.

I gave Pirelli and Cooper a look just don't have any experience with them so didn't know what to make of them.

I'll give 'em a closer look.

Edited by Kenny782
  • Like 1
Posted (edited)
Quote

I say try the dealers too.

Big O seems to have deals right now too.

Looks like NTD some other division of Big O is in Texas but looks like there just around the larger cities.

Edited by Kenny782
Posted (edited)
Quote

Just did this myself last week.  Also comes with free rotations or 1 alignment a year for 3 years.  

 

Fantastic tire, always knew they were!  Not playing off road as much anymore so these replaced my trusty KO2s.  My wife and I can talk without raising our voices and I can hear that noise under the dash that I thought went away 4 years ago!  LOL

You win some, you some huh LOL

Edited by Kenny782
Posted
2 hours ago, Kenny782 said:

I gave Pirelli and Cooper a look just don't have any experience with them so didn't know what to make of them.

I'll give 'em a closer look.

Cooper makes a really good tire.

 

I will be putting on a set of the AT3's some time this winter. Best part is they come in the 22" size.

  • Like 2
Posted

Looked at Cooper but a buddy of mine said while he used to love them had bad luck with their newer stuff.

Granted could have just been the particular line he went with, every company has some that are better than others.

He has a set of Pirelli's now and said the grab the road like nobody's business but ride a bit rough, so I decided to give the Michelin's a try.

 

Only have a few miles on them and no rain so too early to judge but so far so good.

Definitely quiet, I got 'em up to 80 on the expressway, no noise or vibration, handling and cornering was good.

I'll try and take 'em out for a drive north to Harlingen over the weekend and try them out a bit.

A good 60 miles round trip so should give me a better feel for them.

 

I appreciate all the feedback guys.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • 87 down as low as $5.14 here... winning!
    • Progress... sort of.   Intake is disassembled, spider is out, fuel lines removed. Used a torch on the stripped screw with the lower intake off, much easier when I've got the intake sitting on my workbench, I made it talk. Walked right out with a pair of vice grips once it was nice and toasty hot.   New parts are piling up on my service cart waiting to be installed. Distributor, temperature sensor, new gaskets, fuel line kit, themostat, water neck.   My new pickle is I don't want to spend $600 on a replacement spider. I'm not sure IT is bad. I'm probably splitting hairs. Or it's $300 to send mine away and another 3 weeks of the truck just sitting. I have half a mind to assemble everything with the old spider to see if I can get away with just replacing the fuel pressure regulator to be safe. The obvious issue was the gushing high pressure fuel line which will be replaced. Getting to the spider really isn't that hard, and now I know what I'm doing , swapping it would be a breeze should it absolutely need one. Stupid, or smart?   The part that gives me pause is replacing the distributor. Well, it's already out. And I didn't mark it, whoopsie! Engine was at TDC when I removed it, I know that, so upon correct reinstall the metal tip on the rotor should point to the TDC mark on the distributor because that's where it was pointing on the old distributor. Worst case I'm a tooth off and have to re-stab it.   But then, what? I assume the truck will start. It doesn't appear the timing can be set. Here's the problem: These distributors can't be rotated but a degree or two, by design. What I read is Cam ****** needs to be -2 to +2 degrees, ideally at 0 (and checked/set above 1000 rpm). There should be enough wiggle to get that properly set, but checking the reported value is another potential issue. My Actron 9185 scanner says it supports enhanced GM PIDs and Cam ****** is one of them but it's unclear that I'll be able to correctly see it over OBD 1.5. I can see why people end up junking these things with life left in them. They're an absolute nightmare with tweener-year diagnostics/electronics and unobtanium parts.   Fingers crossed it starts and idles nicely. There can be hope, right? I'ma buy a lottery ticket the same day just in case.   Next steps..DO IT. I have not installed an intake before so I've been reading and watching a lot. Some say NO RTV except on china walls, some say DO RTV on water ports but not fuel/air intake. 1/4 or 3/8 bead on China walls? I think my strategy will be, obviously, RTV china walls with overlap on the gasket corners. Chapstick-style RTV the water ports. Leave intake ports dry. The only set of intake gaskets I could find locally are Edelbrock performance gaskets (uh...for an asthmatic 190hp V6? LOL) so we'll see how they do.   #NoToolLeftBehind. It took an hour, but my recovery mission for my deep 10mm socket was successful. It had rolled down the bellhousing and wedged itself between what I think are the fuel lines? I couldn't see it at all, but with a junk antenna I had laying around, I blindly went poking/sweeping for it, heard it clink, raised the truck, and caught a sliver glimpse of chrome with a flashlight way up there in Narnia. I had pushed it farther along the lines holding it captive, but within access of severely improvised tools, poking and cursing at it to finally knock it free to where I could get a fingertip on it to bring it home.    Not much to see.      
    • Thats crazy considering im right next door (Indiana)
    • For a limited time, retail and commercial accounts receive an AMSOIL Vinyl Tool Tray with their order of $500 or more when they use code TRAY726 at checkout. The promotion runs through July 21, 2026.   Order at https://syntheticadvantage.com   Want to use AMSOIL in your business or sell at your store, apply here.  https://www.amsoil.com/business-opportunities/?zo=521390  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...