Jump to content

Recommended Posts

Posted
7 minutes ago, Cnick said:


most we’ve ever driven towing in a day was 1000 miles, and that took about 16 hrs. We had some unexpected delays and were stuck 1000 miles from where we needed to be the next day. We needed to be at my wife’s mom’s wedding… 1000 miles towing in the Northeast is way too much! Out west it’s a lot easier to cover ground, with way less driver fatigue since you’re not dealing with as many distractions on the road. 
 

With some well planned routes 5 hrs on the road is when I “start” to stop having fun, 2 to 3 hrs is perfect. We travel full time though so we technically have the time. With that said even we have to get places sometimes, so 10+ hr days on the road happen a few times a year. 

 

 

Not retired yet, so we typically like to get 700-1000 in a day.  Not hauling we will do 12-15, hauling usually stays around the 8-10hr mark.  when i retire,  most likely will probably shut it down between the 5-7hr mark and have a good time.  

Posted

Also think if you cant go 65 on the highway you shouldnt be doing it.  Anything under 65 is a detriment to drivers around you and yourself.  And if you cant handle 65 then you need to either not drive, get a better truck, lighten the load, or hire somebody to do it.  

Posted
11 minutes ago, nards444 said:

 

Obviously experience matters and helps and a professional driver should be able to handle it more.  I think what also aids at least truck drivers is usually they are going slower and driving in and out and its much more flat lined experience.

 

The reality whether you can handle it or not, and even if you never crashed, everybody fatigues and reflexes dimish, its a proven fact. 

Some people have more drive and determination than others. And they can overcome obstacles. Sometimes it’s the perception of they don’t have a choice. In my case it was that and being OCD. What stopped me at 40 with the straight thought driving was the realization I had no memory of getting where I was. About 3 hours of lost time. 

Posted
12 minutes ago, KARNUT said:

the realization I had no memory of getting where I was

 

Been there. Done that. :)

 

  • Like 1
Posted
19 minutes ago, nards444 said:

 

Not retired yet, so we typically like to get 700-1000 in a day.  Not hauling we will do 12-15, hauling usually stays around the 8-10hr mark.  when i retire,  most likely will probably shut it down between the 5-7hr mark and have a good time.  

We’re not retired yet either, we travel for a living . No idea what we will do when we retire 😳

Posted
7 hours ago, nards444 said:

Also think if you cant go 65 on the highway you shouldnt be doing it.  Anything under 65 is a detriment to drivers around you and yourself.  And if you cant handle 65 then you need to either not drive, get a better truck, lighten the load, or hire somebody to do it.  

Your opinion is just that, an opinion. 

 

Traveling slower not only yields better fuel mileage, but you put less wear and tear on the equipment and the driver. 

 

Number one cause of tire blowout is heat in the tire, usually caused by under inflation and/or overloading, but the faster you go the hotter the tire gets.

 

Maximum speed while towing is 55 MPH in the following states:

Alaska, California, Delaware, District of Columbia, Georgia, Hawaii, Illinois, Maine, Michigan, Mississippi, New Hampshire, North Carolina, Ohio, Oregon, Pennsylvania, South Carolina, Virginia.

 

Just facts, not an opinion.

  • Thanks 1
Posted
1 hour ago, Major Tom said:

Your opinion is just that, an opinion. 

 

Traveling slower not only yields better fuel mileage, but you put less wear and tear on the equipment and the driver. 

 

Number one cause of tire blowout is heat in the tire, usually caused by under inflation and/or overloading, but the faster you go the hotter the tire gets.

 

Maximum speed while towing is 55 MPH in the following states:

Alaska, California, Delaware, District of Columbia, Georgia, Hawaii, Illinois, Maine, Michigan, Mississippi, New Hampshire, North Carolina, Ohio, Oregon, Pennsylvania, South Carolina, Virginia.

 

Just facts, not an opinion.

As a frequent driver through Mississippi, North and South Carolina I’ve never seen those speed signs. If that’s the case I haven’t observed the speed differential. I actually get passed by trucks and trailers while doing 72 mph. In Texas they used to have different speeds for trucks and cars. They were clearly marked. Later they changed it to one speed. I guess looking up the laws in each state is a good idea. All those years pulling with my one ton through those states I was really lucky. 

  • Like 1
Posted
3 hours ago, Major Tom said:

Maximum speed while towing is 55 MPH in the following states:

Alaska, California, Delaware, District of Columbia, Georgia, Hawaii, Illinois, Maine, Michigan, Mississippi, New Hampshire, North Carolina, Ohio, Oregon, Pennsylvania, South Carolina, Virginia.

That is excellent information that I had no idea about.  Especially seeing that we will be traveling through a lot of those states on our trip to Maine this August.  Thank you very much!!

Posted

I can't speak for the other states, but Ohio does NOT have a 55 mph towing speed limit, posted or otherwise.  If they did, I can assure you any number of Ohio troopers I have driven right past would have gladly pulled me over for going 75.   $$$

 

15 MPH UNDER the speed limit is asking for trouble IMO, when I want to go 55 then I do it on roads that are posted at 55.  I much prefer the 2 lane experience anyway, as long as there is no hurry.      

 

 

Posted
16 hours ago, Major Tom said:

Your opinion is just that, an opinion. 

 

Traveling slower not only yields better fuel mileage, but you put less wear and tear on the equipment and the driver. 

 

Number one cause of tire blowout is heat in the tire, usually caused by under inflation and/or overloading, but the faster you go the hotter the tire gets.

 

Maximum speed while towing is 55 MPH in the following states:

Alaska, California, Delaware, District of Columbia, Georgia, Hawaii, Illinois, Maine, Michigan, Mississippi, New Hampshire, North Carolina, Ohio, Oregon, Pennsylvania, South Carolina, Virginia.

 

Just facts, not an opinion.

I’m pretty sure the only state limited to 55MPH is California, and even that isn’t enforced. 

  • Like 1
Posted (edited)
23 hours ago, Major Tom said:

Your opinion is just that, an opinion. 

 

Traveling slower not only yields better fuel mileage, but you put less wear and tear on the equipment and the driver. 

 

Number one cause of tire blowout is heat in the tire, usually caused by under inflation and/or overloading, but the faster you go the hotter the tire gets.

 

Maximum speed while towing is 55 MPH in the following states:

Alaska, California, Delaware, District of Columbia, Georgia, Hawaii, Illinois, Maine, Michigan, Mississippi, New Hampshire, North Carolina, Ohio, Oregon, Pennsylvania, South Carolina, Virginia.

 

Just facts, not an opinion.


Um, no. California is the only state with a 55 mph towing speed limit.

https://rvnerds.com/resources/speed-limits-and-towing/

I also agree with the opinion of the person you responded to. If a person wants to travel much slower than the speed limit, then they should stay off of the interstate and stick to state highways. Impeding the flow of traffic causes accidents.


Edit: Oops, I see the people above me already corrected the speed limit part...

Edited by Dr1ft3r
Posted

I’ll have to eat some crow and say my reference for maximum tow speeds is dated.  There was a time when the NATIONAL speed limit was 55 mph, during the 70’s fuel embargo.  The only way to be sure is to go to the source, to each states laws, code, or whatever they call them and do your own research.  I did look into Ohio and the towing speed limit was “If combine truck/trailer combo exceeds 8,000 lbs, speed limit is 55 mph.”  That changed in to 70mph in 2013, and the state senate is working on a bill right now to raise it to 75mph.

 

Interstates do have a minimum speed limit.  Some states still have sign posted, but is usually 45 mph exception being Florida at 50 mph.  There are probably more exception to the 45 mph, but I quit looking after Florida.

Posted
26 minutes ago, Major Tom said:

I’ll have to eat some crow and say my reference for maximum tow speeds is dated.  There was a time when the NATIONAL speed limit was 55 mph, during the 70’s fuel embargo.  The only way to be sure is to go to the source, to each states laws, code, or whatever they call them and do your own research.  I did look into Ohio and the towing speed limit was “If combine truck/trailer combo exceeds 8,000 lbs, speed limit is 55 mph.”  That changed in to 70mph in 2013, and the state senate is working on a bill right now to raise it to 75mph.

 

Interstates do have a minimum speed limit.  Some states still have sign posted, but is usually 45 mph exception being Florida at 50 mph.  There are probably more exception to the 45 mph, but I quit looking after Florida.

I didn’t want to call you out after my research. As far as tires overheating. Proper tires and air pressure will solve that issue. Most campers I encounter have no problem with the speed limit driving on the interstate as long as proper following distance is maintained. 

Posted (edited)

Ok, interesting comments here of late.  LOL..... I already know what my limit is towing and that is 65.  I think it's a safe speed, I've never had a problem impeding traffic.  I stay to the right away from everyone.  No problems at all.  If I don't set my cruise, I look down and I'm going 80.  To me towing, that's too fast when factoring in all the weight of what I'm towing.  But hey, to each their own.  I'm sure I can get away with 75mph.  I just don't want to.  If I have to brake hard, I want to scrub off as much speed as possible in a very short time.  To me, that's called safety.

Edit:  If I was told and guarantied a clear run from Atlanta to Maine, no traffic, no animals, nothing to avoid...no tire blow outs....hey I'm in for 80 plus while towing.  But I haven't been guarantied anything as none of us will ever be.

Edited by Jettech1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have a 2015 Silverado and sometimes I can not get in to the truck. I use the key to unlock the driver door. Something is locking the truck when I unlock it, last night I left the truck open and this morning it was locked with the mirrors folded in. This happens while driving so it is now a safety issue. I reach down for the folding button and they open, then they close again.  Any advice, thank you,   Ed
    • Did you ever find a resolution to this? my 2019 Silverado 1500 is showing the exact same headlights issues with the exact same symptoms.  would help a ton if anyone has any advice on this or better yet a known solution..
    • Wawa and Meijer here have ethanol free (88 & 89) I use for my mower and lawn equipment.  Its not much more than reg.  I paid $3.29 a few weeks ago.  
    • tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...