Jump to content

Recommended Posts

Posted (edited)

What are you guys doing for window tinting?.......leaving as-is from factory or going aftermarket to make it darker?

My 2023 Silverado High Country has 20% in the side-rear and 70% in the side-front.

Below are pictures of my truck (Red) along with another High Country that had the side-front done to match rears.....I like the look for sure. 

 

I'm seriously considering going 20% side-front to match the rear and make it more comfortable. 

Also, talked to a local installer and his suggestion is to go with the IRX Ceramic heat-rejection tint for all sides and back since my truck sits outside. 

Minnesota is max 50% on side-front.....  🤫

 

Any input or recommendations appreciated.......

 

 

IMG_9871.jpeg

IMG_9872.jpeg

Edited by BigMick2023
Posted

I have 35 and 20 on the front and rear, respectively. NC inspections measure tint on the front, otherwise I would have went to 20 all around. My previous car was 27.5 front and 20 rear. It just made it a headache come inspection time to get it to "pass". My advice, go with legal if you have to deal with inspections. I don't regret having darker tint previously, I just hated dealing with the inspection piece. Not sure if that helps with your decision. 

Posted
1 hour ago, 1454 said:

I have 35 and 20 on the front and rear, respectively. NC inspections measure tint on the front, otherwise I would have went to 20 all around. My previous car was 27.5 front and 20 rear. It just made it a headache come inspection time to get it to "pass". My advice, go with legal if you have to deal with inspections. I don't regret having darker tint previously, I just hated dealing with the inspection piece. Not sure if that helps with your decision. 

 

 

Thanks for your input.....

No inspections in Minnesota, so that's not an issue. Just if I got pulled over for something and they wanted to be a butt-head about it. 

I asked the installer and he said there are very few issues going darker as long as you aren't a jerk with the cops or drive like an idiot.....sports cars are more vulnerable, trucks not so much. 

 

Thanks....

  • Thanks 1
Posted
2 hours ago, BigMick2023 said:

 

 

Thanks for your input.....

No inspections in Minnesota, so that's not an issue. Just if I got pulled over for something and they wanted to be a butt-head about it. 

I asked the installer and he said there are very few issues going darker as long as you aren't a jerk with the cops or drive like an idiot.....sports cars are more vulnerable, trucks not so much. 

 

Thanks....

Butthead or not put yourself in a police officers shoes, you do a traffic stop with a vehicle that has dark illegal tint worse at night now you proceed to the vehicle and what runs through your mind is do they have a weapon pointed at me? Even though the spot is aimed at the driver side door mirror to luminate the inside of the stopped vehicle it doesn't help much with dark tint now on vehicles that are tinted behind the drivers front seat area the spot will light up the inside of the vehicle. So the best thing to do is put the driver side door window down and have both hands on top the steering wheel.

  • Like 2
Posted

I have a close match to the rear and a limo tint brow. I've had side tint and brows all the time I was in Florida (30 years). Can't stand to be without it now. I would limo tint the rear until this truck. Now with the camera rearview mirror it isn't necessary. 20230512_055025.thumb.jpg.5fa4e4d8ce36bac32cc3ed33777a2952.jpg

  • Like 1
Posted
12 hours ago, Silverado4x4 said:

Butthead or not put yourself in a police officers shoes, you do a traffic stop with a vehicle that has dark illegal tint worse at night now you proceed to the vehicle and what runs through your mind is do they have a weapon pointed at me? Even though the spot is aimed at the driver side door mirror to luminate the inside of the stopped vehicle it doesn't help much with dark tint now on vehicles that are tinted behind the drivers front seat area the spot will light up the inside of the vehicle. So the best thing to do is put the driver side door window down and have both hands on top the steering wheel.

 

 

I don't want this thread to turn into a legality debate.....we're all adults here and can make that decision for ourselves. 

 

Just inquiring what you guys have done for window tint and what works well for both blocking UV and heat rejection. 

Posted

Whatever you do, go with the ceramic tint... Makes a big difference with the heat radiating through the windows. Yes, the inside of the truck still gets hot when baking out in the sun all day.

I put a ceramic tint on my windshield a there is a noticeable difference that you can feel from the heat coming through the side windows vs the windshield.

The dealer had put a tint on the side windows, so at the time I didn't add ceramic to the sides... but I will be going back to add ceramic all the way around.

 

 

  • Like 1
Posted (edited)
5 hours ago, bdallas said:

Whatever you do, go with the ceramic tint... Makes a big difference with the heat radiating through the windows. Yes, the inside of the truck still gets hot when baking out in the sun all day.

I put a ceramic tint on my windshield a there is a noticeable difference that you can feel from the heat coming through the side windows vs the windshield.

The dealer had put a tint on the side windows, so at the time I didn't add ceramic to the sides... but I will be going back to add ceramic all the way around.

 

 

Good to know.....they have so many types now it's tough to figure it out. 

These are the two types of ceramic Im considering....

CTX Ceramic Tint

Restyle your vehicle and make it more comfortable with LLumar® CTX® ceramic window tint. This durable window tint comes in multiple color-stable charcoal shades that range from limo-dark to a subtle gray hint. Because it’s metal-free, there’s no mirror-like, reflective look with CTX.
CTX ceramic tint is an excellent performer when it comes to rejecting heat and is loaded with other benefits too. It shields you from 99% of harmful UV rays, cuts irritating glare, and helps protect against injuries from shattered glass – all while helping you feel cooler. This makes LLumar CTX a smart choice when you want top quality window tint but not the top-of-the-line price. You’ll feel the difference when you choose CTX or any of our other ceramic tint products. They’re all made with powerful, road-tested nano-ceramic technology that’s able to help block heat even in the lightest shades. Our infrared-rejecting IRX tint and clear AIR film are also excellent choices when it comes to harnessing the power of nano-ceramic technology.

 

 

IRX Ceramic Tint

IRX Heat-Rejecting Window Tint LLumar® IRX™ heat-rejecting window tint transforms your vehicle inside and out. It features advanced nano-ceramic construction that specifically targets infrared rays. This is what gives LLumar IRX tint its name and its cooling power. IRX is also loaded with additional premium features:

  • Easy electronic connectivity
  • Protection against more than 99% of UV rays
  • Discreet privacy
  • Glare reduction

IRX comes in a wide range of shades. It can change the look of your car or blend seamlessly with your factory tinted windows. Either way, IRX’s premium composition can block a significant amount of heat. So, you can pick your perfect shade, without compromising on comfort.
All tinted windows block some heat, but advanced, infrared heat-rejecting ceramic tint can block the most. LLumar IRX is no exception. It’s the next step up from CTX.

Edited by BigMick2023
Posted

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

  • Like 1
  • Haha 1
Posted
9 hours ago, Wiggums said:

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

 

This ^^^^^

Posted
19 hours ago, Wiggums said:

I have 3M ceramic tint all around, including front windshield. Totally worth it but it repels heat so well I climb in cold interiors during winters.

3M is the only way to go. I still see our 2001 Impala driving around and the tint is still black like its was brand new

 

 

 

  • 2 weeks later...
Posted

Following up to my original post, had the window tint installed today @ Black Diamond here in Minnesota. 

I went with the IRX ceramic tint on front side windows, rear side windows, and rear window with slider. 

 

Front Sides:  25%

Rear Sides:  40%

Rear windows and slider:  5%

This is over the top of the factory tint of 70/20. 

 

I love the look and should be great with reducing interior heat and sun damage. 

The tinting flows nicely from front to back, rather than stock that just looks weird IMHO. 

 

B4BA9AB3-1971-4D31-91EF-E809501DC0ED_1_105_c.thumb.jpeg.f178aa29141c0d2c817c5a9ee97ef03b.jpeg

 

F3C46F51-BAE7-44CF-8A5F-D038701BC783_1_105_c.thumb.jpeg.6697e09f03360f3327d47428361e8e2a.jpeg

 

  • Like 2
Posted

Looks great! I also went with ceramic all the way around including the front windshield and the results are amazing. A must have for here in Texas. 

  • Like 1
Posted
1 hour ago, dieselfan1 said:

How is it at night?

 

Not bad at all! My front windshield is also tinted. I see a lot of people around here doing the same, sure, it's illegal, but have never seen people cited for that.

 

From the outside, it looks really dark, but if you're inside, you can still see everything. It's like sunglasses. People can't see your eyes but you can see outside just fine. Same thing.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
    • 1Based on independent testing of OE 0W-20 in the Peugeot TU3M Wear Test as required by the dexos1 Gen 2 specification.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...