Jump to content

Recommended Posts

Posted

Why didn't you just take care of it all along? 39k km ain't very many miles. Maybe you just have money like that and can afford not to change your oil and what not

Posted

I mean, I don't mean to sound like a douche, but if you don't take any care of it and just drive it into things, it's going to look and feel like crap, and that's with any car.

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Posted

I bought it cause I got a good deal on it not cause I liked it I bought it new for $38 000 its hard to take care of a vehicle you don't like that's why I'm going to dump it off and go buy another new truck but something I actually really like. Iv had it going on three years other then few parts dagling off it its bin a suprisley reliable truck and I abuse the snot out of it every time I drive it.

Posted

I'm ex oilfield so is the truck if that explains anything. Was thinking of waiting for this 2016/2017 update and going in and buying a new HD just can't make up my mind on what color I want was thinking red but not sure.

Posted

 

374f400394b110149c2382665ce038b6.jpg I have bin keeping an eye on this truck seems like a good price but don't like the rims want the ltz style chrome rims.

Posted

I work oil and utility R.O.Ws for 40 years, my interior stayed spotless and outside got cleaned once a week whether I like my truck or not. I even haul people sometimes, rule no. one keep my truck clean or walk. I hate a dirty truck. If a equipment operator came looking for a job from me in a unkept truck I figured he wouldn't take care of my equipment, think about it.

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Posted (edited)

Got three of the door panels disassembled for the speakers that should arrive tomorrow, to make sure I have them swapped in an an hour or so(my free time limit).

 

Got the shrink wrap on the wires that I had to strip, to have them ready to solder when the new Head Unit shows up friday. Think I can do that in 2 hours, or less, since once I'm in the truck its just swapping a harness. Just hope the Maesteo programming is easy. All that took under an hour, so Im handily beating the time estimates the shop gave me.

Edited by SnakeEyes
  • Like 1
Posted

I work oil and utility R.O.Ws for 40 years, my interior stayed spotless and outside got cleaned once a week whether I like my truck or not. I even haul people sometimes, rule no. one keep my truck clean or walk. I hate a dirty truck. If a equipment operator came looking for a job from me in a unkept truck I figured he wouldn't take care of my equipment, think about it.

 

 

Sent from my iPhone using Tapatalk

Our work truck is used in the pasture every day over the winter, and sees gravel/mud/fields every day of the summer. But it's kept clean. I like to keep any equipment I'm running as clean as possible too.

 

My 2006 is the same way. It's not just a pickup, it's my partner and the better I treat it the better it'll treat me.

  • Like 2
Posted (edited)

This is weird. My new head unit I bought from bestbuy is being shipped from Audio America. I went and checked, I did buy it directly from Best Buy, not their marketplace. I know for sure because I used gift cards and RZ certs and you can't use gift cards and RZ certs on their marketplace.

Edited by SnakeEyes
Posted

I'm the same way with mine. I paid a stupid amount of money for it, so I've got to take care of it. Need to get at least 30 years out of it to justify the cost. Wishful thinking in this day and age! Just noticed, my rockers are starting to rust. :nonod: If I never washed this thing they probably would've blown out 5 years ago.

 

The day I spend another mid-5-figures on a friggin GM will be the day I buy oceanfront Nebraska property ....

Posted

Man, I think they are still the best thing going value wise...Plus, parts are so relatively cheap when a repair is needed. I can go down to the local ACDelco retail outlet and get factory parts at good prices. You can't do this with any other brand. To me that is huge. Plus, I have become so used to working on GM trucks/cars that I don't think I would be comfortable with anything else, if you can believe that. Re: the rockers- I swear, that liquid de-icer pre-treatment that they are using these days is the worst thing in the world for vehicles. GM does at least still have their 6/100k rust through coverage.

Posted (edited)

Maybe with the old trucks ... but I find none of that is true today. When the fuel pump fails and you're not set up to tackle that yourself, it's $600 MINIMUM around here. Fuel pump on my '72 El Camino cost $10 and took literally 5 minutes to change.

 

I do agree with the crap they throw on the roads today. People these days are spoiled and have no personal responsibility - part of the reason this country finds itself where it is today. If the roads aren't completely BARE the night of a major snowstorm, people around here melt down. What ever happened to running SNOW TIRES and TAKING YOUR TIME to get to work?? We got by just fine with 2wd trucks and rear wheel drive cars ... and so did the millions of others up north here. Now if you can't do 60 mph through a storm, people freak out .... and the unintended consequence of that is some MAJOR rust ...

 

$30k - $60k for a vehicle that only makes it 10 years if you're lucky is not a very good deal in my opinion ...

Edited by Jsdirt
  • Like 1
Posted

No truck will be simple to change the fuel pump on. They all require removing the bed or dropping the tank. Thankfully most cars have access panels but for pretty much everything on a full frame you're in for a bit of work.

 

Never mind that on the German stuff the high pressure pump on direct injection systems is a four figure part before installation. The trucks use a cam-driven HPFP so hopefully that's cheaper.

Posted

Maybe with the old trucks ... but I find none of that is true today. When the fuel pump fails and you're not set up to tackle that yourself, it's $600 MINIMUM around here. Fuel pump on my '72 El Camino cost $10 and took literally 5 minutes to change.

 

I do agree with the crap they throw on the roads today. People these days are spoiled and have no personal responsibility - part of the reason this country finds itself where it is today. If the roads aren't completely BARE the night of a major snowstorm, people around here melt down. What ever happened to running SNOW TIRES and TAKING YOUR TIME to get to work?? We got by just fine with 2wd trucks and rear wheel drive cars ... and so did the millions of others up north here. Now if you can't do 60 mph through a storm, people freak out .... and the unintended consequence of that is some MAJOR rust ...

 

$30k - $60k for a vehicle that only makes it 10 years if you're lucky is not a very good deal in my opinion ...

Growing up in 60s and 70s I can tell you that by 60 to 100k miles you had a rust bucket with one transmission change, radiator, gas tank, a few brake jobs and tune ups. Your warranty was 12-12. The price was relative to the times, I like them much better now.

 

 

Sent from my iPhone using Tapatalk

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined
  • Who's Online   4 Members, 1 Anonymous, 408 Guests (See full list)


  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...