Jump to content

Recommended Posts

Posted

 

Where'd you get the headlights? Cost??

 

There his stock ones he painted and removed the reflectors

Posted

 

Hows the noise level with those toyo R/T's?

Lockey,

 

Probably the best decision I have ever made when considering/buying tires. In my opinion they're just as aggressive and probably better looking than any MT tire. They are by far the quietest MT tread style tire I have ever ridden in, and I'll bet they're even quieter once I get my alignment done in a couple days. There's almost no hum at 75 mph on the highway. I can't comment on their offroad capabilities yet, but when I get her on some back roads soon I'll be sure to report back.

 

If you're debating between AT and MT, I HIGHLY suggest you consider these tires. They are a bit more expensive than most of us would want to pay, but with the 45k mile warranty on them and considering ride quality, it's hard to pass up.

Posted

Wow that's awesome to hear! I love the look of a mud tire but usually go with terra grapplers because they are very street friendly. I will definitely consider them.

Posted

Lockey,

 

Probably the best decision I have ever made when considering/buying tires. In my opinion they're just as aggressive and probably better looking than any MT tire. They are by far the quietest MT tread style tire I have ever ridden in, and I'll bet they're even quieter once I get my alignment done in a couple days. There's almost no hum at 75 mph on the highway. I can't comment on their offroad capabilities yet, but when I get her on some back roads soon I'll be sure to report back.

 

If you're debating between AT and MT, I HIGHLY suggest you consider these tires. They are a bit more expensive than most of us would want to pay, but with the 45k mile warranty on them and considering ride quality, it's hard to pass up.

I can vouch for every word he said. The R/T's are phenomenal all around. You keep them spinning and they keep gripping and slinging mud.

Wow that's awesome to hear! I love the look of a mud tire but usually go with terra grapplers because they are very street friendly. I will definitely consider them.

These will outperform Terra grapplers any day of the week.
Posted

Mine is not the magnaride but I am looking to do a 7" kit if the Mcgaughy kit doesn't ship this week I am probably switching to a FTS kit but I heard the FTS and Mcgaughy lifts are very similar in construction and I was looking for some tips on installing since this is my first time lifting a truck and tearing a front end apart. I am working on it with someone who has lifted a jeep before but never a truck.

I have the McGaughy's kit set at 8" and get a light vibration when in 4wheel hi. Contact McGaughys about it and sent in pictures and they said everything looks perfect and that some trucks just need a driveshaft and they will not cover the cost. Not exactly the best service I've dealt with. Since it's summer, I'll worry about it in the fall. I'd go a different route than Mcgaughys though. The chrome inserts have started rusting after just 6 months as well. Another thing that they will not cover. Not really sure what their warranty does cover.....

  • Like 1
Posted (edited)

I got a 3 inch lift on my 2014 sierra its one of those ready lift kits i believe so technically a slightly bigger leveling kit including a slightly bigger block in the rear and put the Fuel tires 33x12.5x20 and have a bit of a rub on the upper control arm on full turn and want to know what offset i can get on rims to eliminate the problem and not going crazy on the offset.

post-142980-0-10613300-1430371806_thumb.jpg

post-142980-0-10613300-1430371806_thumb.jpg

post-142980-0-10613300-1430371806_thumb.jpg

post-142980-0-10613300-1430371806_thumb.jpg

Edited by daviddlfo
Posted (edited)

Just got my lift installed! Here on some pictures!

 

6" BDS with MT 17" Rims wrapped in 35' x 12.5" BF Goodrich K02. No rubbing, rides great!

Towing a 16' Chaparral

Edited by azarj10
Posted

Why spend the money on the pricey lifts when you can just buy a Zone Lift (sister company of BDS) for a fraction of the price? All the reviews I've seen on here speak very highly of this lift. Anybody know the big differences between one vs. the other? My truck has the steel control arms, not the aluminum. I really want to lift the truck, but why so much variance in kit pricing? I'd imagine there can't be too many ways to lift a truck, so the parts/materials in each kit are likely very similar right?


Why spend the money on the pricey lifts when you can just buy a Zone Lift (sister company of BDS) for a fraction of the price? All the reviews I've seen on here speak very highly of this lift. Anybody know the big differences between one vs. the other? My truck has the steel control arms, not the aluminum. I really want to lift the truck, but why so much variance in kit pricing? I'd imagine there can't be too many ways to lift a truck, so the parts/materials in each kit are likely very similar right?


Sorry for the double post..

Posted

I have a 2014 GMC Sierra all terrain with 5inch rcx lift kit , 20x10 rockstar rims with -24 offset and 305/55/20 copper zeon ltz tires , amp power step , bushwaker pocket style fended flares , boral exhaust with metal mulisha 4 inch tip ... Looking to put 1.25 rough country or 1.5 zone body lift to fit 35's

 

DFD72325-B97F-4856-8878-9A39CE53EAE4.jpg

 

 

58D6ADDD-DD0B-4295-A056-58AA3C086C7F.jpg

0B87492D-8483-4493-9835-52660D324184.jpg

 

I'm having a hard time deciding which lift to go with. I will be installing the exact same size tires as yours and rims with the same measurements as well. I am torn between the RCX 5", the skyjacker 4" and the RCX 4.75" combo lift. Would you mind posting measurements to your wheel wells or maybe any pictures you have next to stock vehicles? Also, any feedback you can give on the lift would be very much appreciated!

Posted (edited)

Why spend the money on the pricey lifts when you can just buy a Zone Lift (sister company of BDS) for a fraction of the price? All the reviews I've seen on here speak very highly of this lift. Anybody know the big differences between one vs. the other? My truck has the steel control arms, not the aluminum. I really want to lift the truck, but why so much variance in kit pricing? I'd imagine there can't be too many ways to lift a truck, so the parts/materials in each kit are likely very similar right?

Why spend the money on the pricey lifts when you can just buy a Zone Lift (sister company of BDS) for a fraction of the price? All the reviews I've seen on here speak very highly of this lift. Anybody know the big differences between one vs. the other? My truck has the steel control arms, not the aluminum. I really want to lift the truck, but why so much variance in kit pricing? I'd imagine there can't be too many ways to lift a truck, so the parts/materials in each kit are likely very similar right?

Sorry for the double post..

I just got my BDS with fox coilover and rear leafsprings. Before I bought I talked to BDS a lot. Basically the spindles are the only part that the zone and BDS share. They each have their own different crossmember designs. BDS uses replacement struts in front but reuses the oe coil springs. BDS also offers full leaf spring option in rear and Fox shocks/coilover option. ZONE crossmember is straight across and BSDS is arched to follow factory frame. Zone uses spacers on the factory struts and blocks and/or add a leafs in back

Edited by Payton34
Posted

I just got my BDS with fox coilover and rear leafsprings. Before I bought I talked to BDS a lot. Basically the spindles are the only part that the zone and BDS share. They each have their own different crossmember designs. BDS uses replacement struts in front but reuses the oe coil springs. BDS also offers full leaf spring option in rear and Fox shocks/coilover option. ZONE crossmember is straight across and BSDS is arched to follow factory frame. Zone uses spacers on the factory struts and blocks and/or add a leafs in back

BDS also uses a block system to lift the rear unless you choose the rear spring replacements.

Posted

Are there any 5in+ lifts that dont require cutting?

None that I've found (I've been looking at lifts for weeks trying to make my decision). A popular option is to go with the rough country 4.75" combo lift. You have to cut a small notch in the crossmember to compensate for the differential drop and then a little tab above the spare tire (for the body lift) but that's about it.

 

 

Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,307 Guests (See full list)


  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...