Jump to content

2014+ Leveling Kits

bcazier

By bcazier
in Modifications & Accessories

 Share

Recommended Posts

heels0303 New Member

heels0303

Posted
Posted

Guys

 

I’ve read every single post in this thread, but I’m simply confused on what I need to do for my truck. I have a bone stock 2018 Sierra 1500 Denali Ultimate 4wd (22” wheels). I’m simply trying to raise the front of my truck up to level with the rear. I plan to keep the same stock wheels and tires. Can someone tell me what I need to get?

 

Thanks for the help. I’m not knowledgeable about vehicles and I need some help deciphering all the info I’ve been reading.

 

 

Sent from my iPhone using Tapatalk

 

a42764225ab0a937139cef24caaceacf.jpg

  • Replies 7.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Saleenpowr
Saleenpowr

So i put my RC 2" level kit and Toyo 295/55/20's on this weekend. Install was simple, just like on my 2011. It definitely helps to have an extra set of hands when wedging that spacer in there. 295/

Saleenpowr
Saleenpowr

Thanks. Here is one more from yesterday. Considering we're getting 8-10 inches of rain the next two days, I won't be taking any better pics soon.  

FH212
FH212

Mine is finally done! After months of research I went with the RC 2.5" level kit front only, stock rear block. 20"x9" Fuel Nutz w/ +1 offset, 33x12.50x20 Toyo M/T tires. No rubbing, No trimming, yet a

Posted Images

kylant Enthusiast

kylant

Posted
Posted
14 hours ago, heels0303 said:

Guys

 

I’ve read every single post in this thread, but I’m simply confused on what I need to do for my truck. I have a bone stock 2018 Sierra 1500 Denali Ultimate 4wd (22” wheels). I’m simply trying to raise the front of my truck up to level with the rear. I plan to keep the same stock wheels and tires. Can someone tell me what I need to get?

 

Thanks for the help. I’m not knowledgeable about vehicles and I need some help deciphering all the info I’ve been reading.

 

 

Sent from my iPhone using Tapatalk

 

a42764225ab0a937139cef24caaceacf.jpg

there are kits that level the front and supposedly don't cause any issues. 2" is about max you can go. The issue beyond that starts with the upper ball joint. From what I understand, is that it is not secured in the upper control arm very well. when the angles put on it from leveling, the chances of it popping out greatly increase. Hence the reason for new control arms with a better ball joint cup design. The new upper control arms are generally a different shape, and that is where the issues come from with larger tires and rubbing.  However, there have been reports of stock tires rubbing on stock control arms as well.

 

If all you want to do is level it slightly, I would just get a 2" kit with a Magneride adapter, and be done with it.

  • Like 1
texas9011 New Member

texas9011

Posted
Posted

Just finished installing the Rough Country billet aluminum 2in leveling kit

 

Before and after

 

473B49A3-9B54-4737-84B6-B6DA985688FE.thumb.jpeg.8a84b147dfda625c0a399002c34199b8.jpeg6787772A-0DF2-432F-89E6-E39EED388684.thumb.jpeg.86f967c980cb6355f9f39c85a8c9b377.jpeg

 

  • Like 2
  • 2 weeks later...
All Terrain Enthusiast

All Terrain

Posted
Posted
On 12/29/2018 at 3:41 PM, texas9011 said:

Just finished installing the Rough Country billet aluminum 2in leveling kit

 

Before and after

 

473B49A3-9B54-4737-84B6-B6DA985688FE.thumb.jpeg.8a84b147dfda625c0a399002c34199b8.jpeg6787772A-0DF2-432F-89E6-E39EED388684.thumb.jpeg.86f967c980cb6355f9f39c85a8c9b377.jpeg

 

Looks good, any rubbing issues?

texas9011 New Member

texas9011

Posted
Posted (edited)

@ All Terrain

 

No rubbing issue at all.   the only thing I don't like is the upper ball joint angle.  I am going to keep an eye on it and if I start to see wear, I will likely go with the readylift upper control arms.

Before/After pics of Upper Ball joint.

 

balljoint.thumb.png.8397ef60bcf12de4091a7d2c709b73d3.png

Edited by texas9011
added pic
Rogerrob New Member

Rogerrob

Posted
Posted

Hey guys. I have a 2015 z71 offroad and want to level as high as possible and run as big and fat of tire i can on stock 20 inch wheels. I also want to put fender flare on, hence the fat tire. Can anyone tell me if i can run a 33x12.5x20 tire with just leveling or would that require a lift, which i don't really want to do. I've tried the different websites and things just get more co fusing.

  • 2 weeks later...
bburnsed_12 Enthusiast

bburnsed_12

Posted
Posted
On ‎10‎/‎21‎/‎2018 at 8:46 PM, sierra91 said:

Not the best photo. Got new tires on this weekend. Went from 295/55R20 cooper stt pro to 295/60R20 Toyo MTs 

A041254E-EE95-43F8-BE6B-19EBFBC6660B.jpeg

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

sierra91 Enthusiast

sierra91

Posted
Posted
3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.IMG-0750.thumb.JPG.e2e8b2ec92530ecdfa1d3d6d08de76f6.JPGIMG-0748.thumb.JPG.fb05db41f4f3f3ed209e49d794552ae1.JPG

 

sierra91 Enthusiast

sierra91

Posted
Posted
3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

 

IMG-0746.JPG

sierra91 Enthusiast

sierra91

Posted
Posted

 

3 hours ago, bburnsed_12 said:

id like to see a picture of the front and rear of this truck. Ive got a 3.25in level on mine with the knuckle and diff drop, and contemplating doing 35s or 295/60.

Sorry for some reason would not let me post all of those in one post. I am a huge fan of the wider tire look and these do not bother me only being 11.7 wide

sonofab New Member

sonofab

Posted
Posted

I'm new to this site please don't light me up too much. I've got a 2018 cc, standard bed 4x4, all star edition so I've got the 20" wheels which i love. i want to level the truck and keep my stock wheels. my question is do i use the rough county 2" or go with bilstein 5100 on all four corners and front on the top setting? the truck is a daily driver and i farm on the side so it does get used some for what it is intended. what is going to be the best for me in the long run? i plan on keeping this truck for 10 years.

big papa Enthusiast

big papa

Posted
Posted (edited)

you wont want the Bils at the top setting, crappy ride.  My shop wants to do Bils @ 1.5 and a 1 inch spacer.  Or I may go 2.5" spacer and be cheap AF.  

 

 

Edited by big papa
add more
TNAZ Enthusiast

TNAZ

Posted
Posted
On 1/12/2019 at 7:14 PM, Rogerrob said:

Hey guys. I have a 2015 z71 offroad and want to level as high as possible and run as big and fat of tire i can on stock 20 inch wheels. I also want to put fender flare on, hence the fat tire. Can anyone tell me if i can run a 33x12.5x20 tire with just leveling or would that require a lift, which i don't really want to do. I've tried the different websites and things just get more co fusing.

I'm not an expert but here goes.   You have a 2015 so you likely have cast steel upper control arms (as opposed to stamped steel or aluminum)--that's good news.   I have a 2016 GMC regular cab with the cast steel control arms and did a Bilstein 5100 level (top setting both sides) on my truck which only gave me 1.6 inches on one side and 1.8 inches of lift on the other.  I have factory GMC 18 inch rims with +24mm offset and 8.5 inches width.  I then installed 33 x 12.5 x 18 Toyo MTs ("E" rated tire which is actually a full 12.7 inches wide per Toyo site) all the way around and have zero rubbing issues of any significance (had to zip tie passenger side in one spot).    I also have plenty of clearance on all suspension components, even at full articulation.  Like you, I read all the threads and still wasn't sure how the tires would fit.  I have 8,000 miles on the tires and everything as been perfect.  You want to use stock 20 inch rims which likely are 9 inches wide and have an offset from +27mm to +31mm.  I think the 33's would fit fine.  I would go to Discount tire and have them put one on and if it doesn't work, scrap the plan.  They have a policy of allowing returns if you are not happy for any reason--re-confirm this but I asked in AZ and this policy was in fact true.  Last thought, if you level higher than what I did, I don't know if the upper or lower control arms might be at a different angle and touch the tire--but I think you will be OK and just do the Discount tire testing.

TNAZ Enthusiast

TNAZ

Posted
Posted
5 hours ago, sonofab said:

I'm new to this site please don't light me up too much. I've got a 2018 cc, standard bed 4x4, all star edition so I've got the 20" wheels which i love. i want to level the truck and keep my stock wheels. my question is do i use the rough county 2" or go with bilstein 5100 on all four corners and front on the top setting? the truck is a daily driver and i farm on the side so it does get used some for what it is intended. what is going to be the best for me in the long run? i plan on keeping this truck for 10 years.

I have a 2016 GMC regular cab 2wd and hated the factory shocks.  I installed Bilstein 5100s all the way around and fronts on highest setting and love them.  I subsequently installed Toyo MTs (33 x 12.5 x 18) and love the setup.  If you want to handle dips and bumps on pavement or off-road as you described, the Bilsteins will be the best you can do for the money and they will also lift your front 1.5-2 inches on top setting (seems to vary).  I would go with top setting.  I like zero body roll (I corner hard) and the Bilsteins on the top setting have been perfect.  They handle certain bumps on the pavement way better than the stock shocks but on other types of bumps the stock shocks were better--so that is a wash.   However, these trucks really need 2 to 2.5 inches of lift in the front to be perfectly level.  If you are keeping your stock tire size though, the 1.5 inch top setting Bilstein lift is perfect for looks (the tire won't look too small in the front wheel well).  Also, Bilsteins alone minimize the concerns about ball joints and warranty denials.  See my writeups on all this in the forums.  Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • twgraham
      Video processing module location

      By twgraham · Posted

      Can someone tell me where the video processing module is in a 2023 Silverado? I'm getting conflicting results that it's in the front passenger area or the rear passenger area behind the seat.
    • Chuck FB
      Missing thrust bearing? And oil selection

      By Chuck FB · Posted

      Yes I agree, its what amounts to free advertising to let people know about his UOA testing company, and not that there is anything wrong with that but certainly that is a motivator for putting out videos about the science of oil as well as other topics such as oil and air filtration etc. The interesting part I found with his last video is not only the physics behind the reason for the varying wear due to a diesels working torque range causing more bearing load and that higher viscosity oil is of benefit, it was also that the chemistry behind the GM Dexos 0W-20 and the Mobil Dexos licensed 0W-20 are far enough apart that its showing up with a difference in wear even though the two oils are matched in viscosity and in that comparison viscosity was not having the finger pointed at it.    There are a few youtubers out there or one anyway that I have watched a bit of who has gone through the pains of accessing various countries manuals for a certain engine platform and while in the US/Canada it may say use 0W-20 or what have you for some Toyota product, in some other countries it sings a very different tune for the very same engine with the typical traditional oil viscosity/ambient temperature charts to help choose which oil viscosity is correct for the conditions the vehicle will be used in and in some cases its taken an engine in a US manual that states only use 0W-20 as per warranty coverage and yet that same engine in certain other countries may have up to a 15W-40 etc oil option that meets the spec. Another words the guy who is driving through Death Valley or Phoenix and south weather at 120f is often being fed a line of bs by the US system that has forced vehicle companies to restrict the warranty to a specific low viscosity oil for anterior reasons as well as the long drain interval suggestions.    Thankfully youtube is free ( yet anyway ) for viewers to sift through information and of course comes with the good and the bad ( truth and lies ) and we can choose to turn off/not watch what a person finds is bs or just not interested in the topic.         
    • Atlas
      Missing thrust bearing? And oil selection

      By Atlas · Posted

      No doubt... But, as someone who doesn't pay for his services, but who has provided a few views/clicks on his Youtube platform, the data around the Mobil oil testing I think does have some value including to "freeloaders" like me.   A lot of what he's doing is likely showing the OE's work in their oil selection, something that many of us had kind of assumed was true all along, a good balance of both excellent protection and efficiency.
    • Z45
      Missing thrust bearing? And oil selection

      By Z45 · Posted

      Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...