Jump to content

Recommended Posts

Posted

Quick question on the 2.5 rc kit with the rear blocks, I’m drawing a blank at the moment but the shorter side goes towards the front of the truck right 

Posted
3 minutes ago, Budtn15 said:

Quick question on the 2.5 rc kit with the rear blocks, I’m drawing a blank at the moment but the shorter side goes towards the front of the truck right 

Correct.

Posted
Correct.


Thanks man I thought so I just couldn’t find it anywhere


Sent from my iPhone using Tapatalk
Posted

Not bad at all. Rubs the liner in reverse, I haven’t even tied the liners back on it yet. Those ridge grapplers are the best tire I’ve ever ran, and I think I’ve had em all lmao 

  • Like 1
Posted

Can someone point me towards how to level by lowering the rear of the truck?


Sent from device. Excuse errors.

Posted
29 minutes ago, nowicksl said:

Can someone point me towards how to level by lowering the rear of the truck?


Sent from device. Excuse errors.

You simply remove the factory block.

Posted
On 1/8/2018 at 12:14 PM, Fix29 said:

You simply remove the factory block.

Wow!  It's that easy?  Any idea on what this would cost to get done professionally?

Posted

So I finally got my level kit installed today. I went with the MotoFab 3/2. She looks better now. 45b80018a61dd32b5e8b0f0459273506.jpg798a6e27168bc007516960aa696d3f7f.jpg8c64e3eb53cc083023e2f62c0363b1fd.jpg


Delivered to you via my cellular device using Tapatalk

  • Like 2
Posted
Wow!  It's that easy?  Any idea on what this would cost to get done professionally?
Yes. Not sure what a shop would charge. I swapped my block out with a taller one myself and its really simple if you have tools and any mechanical inclination.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Posted
Can someone point me towards how to level by lowering the rear of the truck?


Sent from device. Excuse errors.
If you remove the rear block that'll only give you like 1 inch. If you want perfect level you have to buy lowering shackles. Both of these trucks have a 3 inch drop in the rear.a45530fbd42120b73c4d94ccaa369295.jpg550829c858b445602deffab5fe6f9d5b.jpg

Sent from my SAMSUNG-SM-N920A using Tapatalk

Posted
Yes. Not sure what a shop would charge. I swapped my block out with a taller one myself and its really simple if you have tools and any mechanical inclination.

Sent from my SAMSUNG-SM-G890A using Tapatalk



1-2 hours of labor. In reality takes less than an hour on a lift.


Sent from my iPhone using Tapatalk
  • Like 1
Posted

 Anyone have any experience with CCM Off-road 3" leveling kit?  Searched the thread for a while and haven't found squat...

Posted
 Anyone have any experience with CCM Off-road 3" leveling kit?  Searched the thread for a while and haven't found squat...



Not CCM but same style AMS 3” spacer.
Angles and ride aren’t great but not horrible either.

c0be692d9e3bc88d0246314d2eaa8b41.jpg

e210fb60a918149123005bcf1b03060c.jpg
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  
    • Yes your absolutely right, I been looking at the 4 inch BDS one and it acutely states you can use the stock 20’s just not the 17’s or 18’s, I also didn’t realize that with my 275/60r20 stock wheels I’m already running 33 inch diameter wheel setup lol so I can just run my stock wheels and tires atleast to start.
    • I would expect that to be lift-kit dependent.  If the kit has interference issues w stock wheels, then the kit/manufacturer should indicate that somewhere.
    • That’s what I’m wondering is if the stock backspacing of the factory wheels will clear new upper control arms and such  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...