Jump to content

Recommended Posts

Posted

where is everyone ordering these from, and do they include specific instructions for out trucks? not just generic instructions, also specific hose lengths cut to our trucks.

Elite Engineering. Lots of write ups in this thread. Even several videos.

Posted

This is one of the annoying negatives to these catch cans. One weeks worth, 328 miles, in Michigan. This is just from my daily work commute. I always check it every weekend in the winter. Previous to this I was only getting 1-2 ounces each week. Temps were not bad, in the 20's - 40's F. I'm sure it probably sucked some of this gunk thru. Also here is my 1 gallon collection jug of about a years worth and 16k miles (I installed mine at about 3k mi).

post-138443-0-48454000-1452390735_thumb.png

post-138443-0-56465700-1452390970_thumb.jpg

post-138443-0-48454000-1452390735_thumb.png

post-138443-0-56465700-1452390970_thumb.jpg

post-138443-0-48454000-1452390735_thumb.png

post-138443-0-56465700-1452390970_thumb.jpg

post-138443-0-48454000-1452390735_thumb.png

post-138443-0-56465700-1452390970_thumb.jpg

  • Like 1
Posted (edited)

Yeah I really wish Elite offered a larger size of the lower half as an upgrade for us Northerners. The little can is just too small. It's not exactly a joy to try to un-thread the can when it's below zero.

 

Hey Elite Engineering, you reading this?

Edited by HondaHawkGT
Posted

Look at the Elite E2-X Ultra...largest capacity made to deal with cold climates and big power builds. Holds I think 20 oz's before it begins to allow any pull through. E2%20Ultra%20internal_zpstxhlixhf.jpg E2%20Ultra_zpsgnr98fwc.jpg

 

Posted (edited)

That would be the way to go. Unfortunately I already shelled out $160 for the original EE can. I'm not dropping an additional $315 for a E2-X. It'd be easy money for EE to offer a larger capacity lower half for those of us with the original.

 

Hopefully they consider offering something on their website soo. Otherwise I'll probably modify my existing can. It wouldn't be too hard to drill and tap the bottom so it can drain to some sort of reservoir.

Edited by HondaHawkGT
Posted

Mine was 2/3rds full when I checked it last night. That condensation really fills it up when temps drop. Ill consider getting E2X in the future I think. Can probably resell this can pretty easy, its a very nice basic can that could go on any type of car.

Posted

Does anyone else have oily residue around the outlet port of the crankcase? Is this normal? I'm assuming it's oil that has condensed in the line on the way to the catch can and flowed back down and leaked out a bit. It's not an excessive amount of oil, but the area around the port is "shiny." There are no drip spots in the driveway or anything.

Posted

It's amazing how much these things collect. I have averaged an ounce of gunk every 40 miles since it got cold up here.

Posted

It's amazing how much these things collect. I have averaged an ounce of gunk every 40 miles since it got cold up here.

 

Yes. It's amazing how much will got caught in a good, properly designed Catch Can

Posted

I emptied my can yesterday, about 800 miles of cold weather driving...UGH what nasty gross stuff that came out. Thick, milky, oily, watery sludge. Thank god the catch can is there. I can't imagine this sh!t getting sucked back into the motor.

  • Like 1
Posted

This is one of the annoying negatives to these catch cans. One weeks worth, 328 miles, in Michigan. This is just from my daily work commute. I always check it every weekend in the winter. Previous to this I was only getting 1-2 ounces each week. Temps were not bad, in the 20's - 40's F. I'm sure it probably sucked some of this gunk thru. Also here is my 1 gallon collection jug of about a years worth and 16k miles (I installed mine at about 3k mi).

I just got back from up north and my can looked as full as yours. I was like oh s**t!! I hope nothing got sucked thru... otherwise that probably made a huge mess!

Posted

I fought through the cold and looked through about 40 pages of this thread today to better understand how to install my E2-X can. Well it all paid off!! Without receiving instructions in the box I have to thank all of you for helping me with this one!!

 

Now I will see how much orange slime builds up in our -15 degree Wisconsin winter. Also gonna see what Tupperware I can take of the wife's to use to empty this in [emoji12]!!

 

b64086cd710a9ab15e9c8bea894683c2.jpg7151807bdc0ad572a31008f31c219248.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Posted

I just got back from up north and my can looked as full as yours. I was like oh s**t!! I hope nothing got sucked thru... otherwise that probably made a huge mess!

It's made me nervous. I've been emptying mine every day or 2 since.

Posted (edited)

It's made me nervous. I've been emptying mine every day or 2 since.

 

Hmm I'll have to see how quickly mine fills after a couple days. It's 8 degrees, brr!!

 

Also, does your exhaust smoke a lot in the cold? I have been paying attention to other cars at stop lights lately and notice that more often than not most cars at the light are NOT smoking while my truck is still spewing out a fairly decent cloud of condensation... is this normal for these trucks? Even after the engine reaches operating temp and stays at that temp for several miles. Maybe I am not getting on it enough, usually I'm putzing on my commute to work and back, barely making 2k rpm ever.

Edited by SkiDooNick700

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   0 Members, 0 Anonymous, 173 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...