pgamboa Posted December 29, 2018 Posted December 29, 2018 Hey Phil, The 84288042 is backordered all over with no ETA. Is the only difference between the 8042 and 8045 the chrome handle? Do you know if the 8045 will fit a Silverado? Thanks, JimYes it will. Sent from my iPhone using Tapatalk
GregH2018 Posted January 4, 2019 Posted January 4, 2019 Hi there, I'm brand new to this forum....although I have been reading through this topic tirelessly trying to figure out everything I need to upgrade my truck. I apologize in advance for any duplicate questions, but I was hoping for any/all advice in regards to part numbers. I have a 2018 Silverado LT double cab Z71. My interior is black with the carbon fiber trim. The info I have gathered is that I'll need: 84288040 - Console Assembly: w/o Denali, w/o rear DVD, black 84092079 - Upper Trim Panel: w/110-volt outlet, synthesis (reverse tartan - carbon fiber) 23467516 - Side Trim: Left w/o e-assist, black 22817347 - Side Trim: Right w/o e-assist, black 22776807 - Front Mounting Bracket 84022323 - Cable: Black to Brown 19119050 - Cable: Black to Grey 84022315 - Cable: Green to Grey 11609982 - Bolts (2) Phil's Harness Would one or more of you fellas help me confirm this info based on your experience? Does the console assembly come with the lid? Any and all help is greatly appreciated!! Best - Greg 1
pgamboa Posted January 4, 2019 Posted January 4, 2019 Hi there, I'm brand new to this forum....although I have been reading through this topic tirelessly trying to figure out everything I need to upgrade my truck. I apologize in advance for any duplicate questions, but I was hoping for any/all advice in regards to part numbers. I have a 2018 Silverado LT double cab Z71. My interior is black with the carbon fiber trim. The info I have gathered is that I'll need: 84288040 - Console Assembly: w/o Denali, w/o rear DVD, black 84092079 - Upper Trim Panel: w/110-volt outlet, synthesis (reverse tartan - carbon fiber) 23467516 - Side Trim: Left w/o e-assist, black 22817347 - Side Trim: Right w/o e-assist, black 22776807 - Front Mounting Bracket 84022323 - Cable: Black to Brown 19119050 - Cable: Black to Grey 84022315 - Cable: Green to Grey 11609982 - Bolts (2) Phil's Harness Would one or more of you fellas help me confirm this info based on your experience? Does the console assembly come with the lid? Any and all help is greatly appreciated!! Best - Greg Greg, PM me. I may have a solution for you to lessen the headache Sent from my iPhone using Tapatalk
johnhankel Posted January 24, 2019 Posted January 24, 2019 Quick question. Will an iPhone 8 Plus fit on the mat that is in these consoles? Specifically looking at the 84288040 console.... I tried to put my iPhone on my dad's 2016 LTZ console and the phone did not lay down on the mat... I do not have a case on the phone either....
Enough Posted January 25, 2019 Posted January 25, 2019 iPhone XR in a Spec case will not lay flat but charges fine with the Qi charger installed in the console lid. Charging indicator in the display indicates charge as does the phone. XR is 3.2" wide in the Spec case. iPhone 8 plus is 3.07" wide without a case according to Apple. 2
larryhyman Posted January 29, 2019 Posted January 29, 2019 (edited) pgamboa any news on the vendor you are working with yet? Edited January 29, 2019 by larryhyman 1
novapwr Posted January 29, 2019 Posted January 29, 2019 Sounds like you'll have a number for the complete console soon, I'm interested.
golferplus1 Posted February 7, 2019 Posted February 7, 2019 On 1/3/2019 at 8:17 PM, GregH2018 said: Hi there, I'm brand new to this forum....although I have been reading through this topic tirelessly trying to figure out everything I need to upgrade my truck. I apologize in advance for any duplicate questions, but I was hoping for any/all advice in regards to part numbers. I have a 2018 Silverado LT double cab Z71. My interior is black with the carbon fiber trim. The info I have gathered is that I'll need: 84288040 - Console Assembly: w/o Denali, w/o rear DVD, black 84092079 - Upper Trim Panel: w/110-volt outlet, synthesis (reverse tartan - carbon fiber) 23467516 - Side Trim: Left w/o e-assist, black 22817347 - Side Trim: Right w/o e-assist, black 22776807 - Front Mounting Bracket 84022323 - Cable: Black to Brown 19119050 - Cable: Black to Grey 84022315 - Cable: Green to Grey 11609982 - Bolts (2) Phil's Harness Would one or more of you fellas help me confirm this info based on your experience? Does the console assembly come with the lid? Any and all help is greatly appreciated!! Best - Greg I am right there with you. I have the exact truck that I just purchased and couldn't find one I liked with the bucket seats. Ultimately I chose exterior color over the center console. I have watched Phil's Youtube video on this at least three times and now just need to find the correct console.
pgamboa Posted February 8, 2019 Posted February 8, 2019 Quick question. Will an iPhone 8 Plus fit on the mat that is in these consoles? Specifically looking at the 84288040 console.... I tried to put my iPhone on my dad's 2016 LTZ console and the phone did not lay down on the mat... I do not have a case on the phone either....Nope. Phone is too wide. Any plus models or the XS Max will not fit. But it will charge with the 2018 charging module/lid. I have the XS Max with the Apple leather case and it charges. Sent from my iPhone using Tapatalk 2
pgamboa Posted February 8, 2019 Posted February 8, 2019 pgamboa any news on the vendor you are working with yet?Yes. I can order these now from a supplier. Current prices are:$750 - Console$75 - USB Cables$150 - Harness$975 total - shipped anywhere in the US.Due to a small handful of damaged consoles, the price will be increasing a little but will include insurance. Sent from my iPhone using Tapatalk 1
pgamboa Posted February 8, 2019 Posted February 8, 2019 Hi there, I'm brand new to this forum....although I have been reading through this topic tirelessly trying to figure out everything I need to upgrade my truck. I apologize in advance for any duplicate questions, but I was hoping for any/all advice in regards to part numbers. I have a 2018 Silverado LT double cab Z71. My interior is black with the carbon fiber trim. The info I have gathered is that I'll need: 84288040 - Console Assembly: w/o Denali, w/o rear DVD, black 84092079 - Upper Trim Panel: w/110-volt outlet, synthesis (reverse tartan - carbon fiber) 23467516 - Side Trim: Left w/o e-assist, black 22817347 - Side Trim: Right w/o e-assist, black 22776807 - Front Mounting Bracket 84022323 - Cable: Black to Brown 19119050 - Cable: Black to Grey 84022315 - Cable: Green to Grey 11609982 - Bolts (2) Phil's Harness Would one or more of you fellas help me confirm this info based on your experience? Does the console assembly come with the lid? Any and all help is greatly appreciated!! Best - Greg I don’t know what 84288040 will get ya... but everything else looks right. I can get these now from a supplier complete. With the wireless charging lid. Sent from my iPhone using Tapatalk
Silv18 Posted February 24, 2019 Posted February 24, 2019 Well that takes the guess work out. One package...may have to do this.
DeePa Posted March 4, 2019 Posted March 4, 2019 What color console comes in the trucks with the Cocoa / Dune interior? Would a black one look strange? Or are they all black?
z71tx Posted March 4, 2019 Posted March 4, 2019 These are the parts for a cocoa interior. The main console piece(most expensive one) is on back order till god knows when. Good luck
johnhankel Posted March 13, 2019 Posted March 13, 2019 Got my console and associated parts today. Now just waiting on Phil’s harness. Sent from my iPhone using Tapatalk 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now