What have you done to your K2 today?

Mdann22 · July 12, 2015

Added putco nite-lux led headlights hi/low/fog

Lund stainless led bull bar

Custom switches in the dash

Elite engineering catch can and clean air oil separator

Engine cover off a Cadillac 6.2 motor(waiting on a Chevy emblem)

Putco led reverse lights and license plate lights

JRaschke11 · July 12, 2015

Added putco nite-lux led headlights hi/low/fog

Lund stainless led bull bar

Custom switches in the dash

Elite engineering catch can and clean air oil separator

Engine cover off a Cadillac 6.2 motor(waiting on a Chevy emblem)

Putco led reverse lights and license plate lights

When you say "catch can and clean air oil separator" that is all the same unit right? I ordered the EE catch can and want to make sure I don't need anything else.

Mdann22 · July 12, 2015

The clean air oil separator replace the oils cap on the truck. It's a separate piece then the catch can. Check out elite engineering. You don't really need it it is optional

JRaschke11 · July 12, 2015

The clean air oil separator replace the oils cap on the truck. It's a separate piece then the catch can. Check out elite engineering. You don't really need it it is optional

From what I am reading the clean side separator isn't really needed with a wet sump system like the trucks have. Definitely needed on the Corvettes with the dry sump.

Have you noticed any residue in the clean side separator? $100 doesn't bother me if it will help, but if it's negligible then I won't bother.

Mdann22 · July 12, 2015

From what I am reading the clean side separator isn't really needed with a wet sump system like the trucks have. Definitely needed on the Corvettes with the dry sump.

Have you noticed any residue in the clean side separator? $100 doesn't bother me if it will help, but if it's negligible then I won't bother.

I would say it's optional. I figured it can't hurt. I've only had it on for a day and haven't driven the truck much so I haven't seen any residue. I did notice some in the lines I had going into the cold air intake. For the 100 bucks I figured I'd give it a try

Ryan698 · July 12, 2015

For the guys running the vled lights what's your honest opinion on them are they brighter and better then stock or are they just for looks..

Sent from my SM-G900W8 using Tapatalk

Victor Ferreira · July 13, 2015

For the guys running the vled lights what's your honest opinion on them are they brighter and better then stock or are they just for looks..

Sent from my SM-G900W8 using Tapatalk

I run them on my low beams and they are a billion times better than stock.

However, the improvement on my truck was massive because I didn't yet have the BCM voltage fix done when I changed them out, so stock was essentially no lighting at all.

Sent from my iPhone using Tapatalk

Ryan698 · July 13, 2015

I run them on my low beams and they are a billion times better than stock.

However, the improvement on my truck was massive because I didn't yet have the BCM voltage fix done when I changed them out, so stock was essentially no lighting at all.

Sent from my iPhone using Tapatalk

Have you ran them in the fog lights that's mainly the ones I want to order but I don't want to shell out 60 bucks for lights that just "look nice" id like to see an actual improvement as well... And bcm fixed what's that? Was it a recall?

Sent from my SM-G900W8 using Tapatalk

Victor Ferreira · July 13, 2015

Have you ran them in the fog lights that's mainly the ones I want to order but I don't want to shell out 60 bucks for lights that just "look nice" id like to see an actual improvement as well... And bcm fixed what's that? Was it a recall?

Sent from my SM-G900W8 using Tapatalk

Oh, I haven't had them in my fog lights, so I can't help there.

The BCM fix wasn't a recall, just a bulletin. In the '14 models you can go to the dealer and ask them to increase voltage to your headlights, as well as replace the bulbs, making them brighter than originally. The '15s already have this done from the factory.

Sent from my iPhone using Tapatalk

Ryan698 · July 13, 2015

Oh, I haven't had them in my fog lights, so I can't help there.

The BCM fix wasn't a recall, just a bulletin. In the '14 models you can go to the dealer and ask them to increase voltage to your headlights, as well as replace the bulbs, making them brighter than originally. The '15s already have this done from the factory.

Sent from my iPhone using Tapatalk

Good to know thank you i figured as much because my 15 has awesome headlights! I just don't want the halogens in the fogs anymore... If anyone has them shed some light please or is there a better bulb to go with then vled... ?

Sent from my SM-G900W8 using Tapatalk

chuckl1218 · July 13, 2015

Installed Volant "Closed Box Air Intake System" today

Sent from my iPhone using Tapatalk

Edited July 13, 2015 by chuckl1218

morrislee · July 13, 2015

Good to know thank you i figured as much because my 15 has awesome headlights! I just don't want the halogens in the fogs anymore... If anyone has them shed some light please or is there a better bulb to go with then vled... ?

Sent from my SM-G900W8 using Tapatalk

I have 25w LMZ fog lights. They actually produce beautiful beam pattern from OEM housing. They also do make a difference even with my 55w DDM HIDs.

I am going to order some 45w LMZ knockoffs for a fraction of the cost even after shipping. I might get two sets and have them in my current fog lights. And my 25w somewhat fitted into my reverse.

Ryan698 · July 13, 2015

I have 25w LMZ fog lights. They actually produce beautiful beam pattern from OEM housing. They also do make a difference even with my 55w DDM HIDs.

I am going to order some 45w LMZ knockoffs for a fraction of the cost even after shipping. I might get two sets and have them in my current fog lights. And my 25w somewhat fitted into my reverse.

Do you have a link to those 45 Watt bad boys I may give them a try and see how i like them if there that much cheaper...

Sent from my SM-G900W8 using Tapatalk

morrislee · July 13, 2015

Do you have a link to those 45 Watt bad boys I may give them a try and see how i like them if there that much cheaper...

Sent from my SM-G900W8 using Tapatalk

I dont have a link, only a skype contact... Haha i wont be home for another 10 days anyway, I also wont order them until i am home so I can check if I can fit the 25w bulbs in there.

amy.sun82 is her contact. I am in Canada, but her quote for a pair of 45w is only 69.99 USD and another $30 for shipping to Canada. I imagine it would be same or cheaper in US.

I saw the pictures, they look identical to the LMZ, not sure what they call it though

Edited July 13, 2015 by morrislee

Ryan698 · July 13, 2015

I dont have a link, only a skype contact... Haha i wont be home for another 10 days anyway, I also wont order them until i am home so I can check if I can fit the 25w bulbs in there.

amy.sun82 is her contact. I am in Canada, but her quote for a pair of 45w is only 69.99 USD and another $30 for shipping to Canada. I imagine it would be same or cheaper in US

I'm also a fellow Canadian where you from im in Manitoba and we'll then maybe I'll bite the bullet and pull the trigger on the vled did you have issue fitting yours or anything with the clips iv read about and how was fitting them... Also what year I your truck a 14 or a 15

Sent from my SM-G900W8 using Tapatalk